2 flute carbide cutter
Ballnose 4 Flute
Carbide Ballnose 45 HRC
Carbide Ballnose 55 HRC
Carbide Ballnose 60 HRC
Carbide Ballnose 65 HRC
Carbide Drilling Inserts
Carbide Endmill 45 HRC
CARBIDE ENDMILL 55 HRC
Carbide Endmill 60 HRC
CARBIDE ENDMILL 65 HRC
Carbide Grooving Insert
CARBIDE INSERT
Carbide Micro Endmill Ballnose
Carbide Milling Inserts
Carbide PCD insert
Carbide Single Flute Cutters
Carbide Threading insert
Carbide Turning Insert
CBN Insert
Cermet Turning Inserts
Chamfer Cutter Insert
Corner Radius Endmill
DEAL
DLC 3 Flute Cutter
Multifunction Drill
Rib Cutter
Roughing Cutter
Taper Ballnose
Uncoated End & Ball
WOOD CUTTER
All products
Accessories
Accessories APP
Accessories APP 2
All
Ballnose (45 HRC)
Ballnose (55 HRC)
Ballnose (60 HRC)
Ballnose (65 HRC)
Ballnose (65 HRC)
Ballnose (Inserted)
Ballnose - 45 HRC
Ballnose - 55 HRC
Ballnose - 55 HRC 1
Ballnose - 60 HRC
Ballnose - 60 HRC 1
Ballnose 4 Flute (55HRC)
BBT40 Holders
Boring Heads
BPT
BT-30 Type
BT-40 BCA
BT-40 Type
Carbide Cutters
Carbide Cutters
Carbide Drills
CARBIDE15
CBN Inserts
Ceramic
Ceratizit
Cermet
Chamfer Cutter
Chamfering
Collet Chucks
Collet Chuks
Collet ER Types
Collets - ER Type
Corner Radius Endmill
Cutters High Feed
Cylindrical Chuks
Cylndrical Chuck
Dasqua
Deal of the Day
Deskar
Dijet
Drill Chuck - Keyless
Drilling Insert
Duracarb
Edge Finders
Endmill (3 Flute) DLC
Endmill (45 HRC)
Endmill (55 HRC) 1
Endmill (60 HRC)
Endmill (65 HRC)
Endmill (Inserted)
Endmill - 45 HRC
Endmill - 55 HRC
Endmill - 55 HRC 1
Endmill - 60 HRC
Endmill - 60 HRC 1
Endmill 2 Flute
Endmill Ballnose - Micro
ER Collets
ER Nuts
ER Spanners
ER Tap Collets
Find the Edge
Gauges
Grooving Inserts
Grooving Work
Heads - Boring
High Feed
Hitachi
Indexable Cutters
Inserted Ballnose
Inserted Cutters
Inserted Endmill
Inserts
INSERTS15
ISO40 Holders
Jaibros
JXD
Keyless Drill Chuck
Knob - Pull Studs
Knob- Pull Studs
Korloy
Korloy
Kyocera
Life
Locking Device
Long Neck Cutters
Mars-Tech
Measurings
Metrology
Micro Endmill Ballnose
Milling Inserts
Milling Opertations
Miscellaneous
Mitsubishi
Multifunction Tools
Non Standard Endmills
Non-Ferrous
Nuts - ER
Nuts ER
PCD Inserts
Promo Inserts
Pull Studs
Rougher Endmills
Single Flute Endmill
SK-40 Type
Spanner - ER
Spanners - ER
Straight Shank Chucks
Tabikut
Tabikut Inserts
TaeguTec
Threading Application
Threading Inserts
Tool Boy
Tools Boy
Torx Keys
Torx Screws
TURNING
Turning Holders
Turning Inserts
Turning Usage
U Drill
Uncoated End & Ball
volume discount
Wholesale Deals
Widia
Yuzuki
Z Setter
ZCCCT
Zero Pre Setter
Zero Setter
Tabikut
16 mm Carbide Endmill 55 HR...
from ₹ 3,127.00
Solid CARBIDE CUTTER are used to machine Hard and tough Material, Steel, Alloy Steel, Cast iron, stainless steel and many other material grades.
Tabikut
TABIKUT R6 Carbide Insert R...
₹ 1,003.00
Carbide insert for Steel and Stainless Steel machining with or without coolant , used in any suitable cutter for EMRW6R and this is used in milling machine mainly. Suitable cutter any cutter which suits RPMT1204 insert.
For steel , mild steel , hrc upto 45-55 with and without coolantR6 for EMRW6R-CUTTER BODYcoatedSUITABLE TO ALL MILLING CUTTER FOR R61204
Tabikut
SPMG090408 TB40G Carbide Dr...
₹ 2,065.00
SPMG090408 U drill mostly range from 28mm,28.5MM,29MM,29.5MM,29.5MM,30MM,30.5MM,31MM,31.5MM,32MM,32.5MM,33MM,33.5 mm
Cutting speed Vc 150-220 m/min , feed 0.05-0.12 this is general recommendation you need to do some trial to find out best suitable parameters.
This is multi grade used on mostly all material , 1 box contain 10 inserts.
Tabikut
5 Mm Carbide Ballnose 55 HR...
from ₹ 348.00
5 Mm Carbide Ballnose 55 HRC 2 Flutes, Shank 5 MM Flute Length 10 Mm Total Length Is 50/75/100 MmSolid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing
The flute Length of the Ballnose is double of diameter if the diameter is 1 mm flute length will be 2 mm same for other sizes, if the total length increase flute length remains same of double of diameter.
Tabikut
CNMG120404/08 CQ 4509 Chipb...
₹ 1,392.00
Product description
CNMG120404/08 CQ4509 Carbide Insert with 0.8 mm Radius used on Steel , Mild Steel
General Parameters are mentioned on box
1 Box contain 10 inserts.
This is Steel Grade not cast iron
Tabikut
Tabikut TNMA160404/08/12 TK...
₹ 1,274.00
TNMA160404/8/12 TK1509 Carbide Insert with 0.4/0.8/1.2 mm Radius used on Cast Iron
General Parameters are mentioned on box
1 Box contain 10 inserts..
Tabikut
1.5 Mm Carbide Ballnose 55 ...
₹ 434.00
1.5 mm Carbide Ballnose 55 HRC PACK OF 2Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing
Size of Carbide Ballnose: 1.5 mm
The flute Length of Ballnose is double of diameter if the diameter is 1 mm flute length will be 2 mm same for other sizes if the total length increase flute length remains the same double diameter.
Tabikut
CNMG120404/08/12 CQ 4609 Ch...
₹ 1,510.00
CNMG120404/08/12 CQ4609 Carbide Insert with 0.8 mm Radius used on Steel , Mild Steel
General Parameters are mentioned on box
1 Box contain 10 inserts.
This is Steel Grade not cast iro
Tabikut
SPMG050204 TB40G Carbide dr...
₹ 1,593.00
SPMG 050204 suitable to Indexable U drills 13MM,13.5MM,14MM,14.5MM,15 mm mostly
Cutting speed Vc 150-220 m/min , feed 0.05-0.12
copper Coated for Versatile usage.
this is stainless steel grade , can be used on other material like steel ,cast iron etc.
Tabikut
Corner Radius Endmill 6 mm ...
from ₹ 508.00
A Corner radius endmill End Mill is usually used to add a specific radius to a workpiece, operation to remove a sharp edge or burr
or using in some finishing operation
most cutters comes with 0.5 mm , 1 mm 1.5 mm even 2 or 3 mm radius please choose as per the requirment.
Tabikut
Micro Endmill 0.5 Mm 4mm Sh...
₹ 502.00
Micro Endmill 0.5 mm with 2 Flutes and 4 mm Shank 0.6 mm Flute Length
Tabikut
MGMN Grooving Insert 1.5/2/...
from ₹ 1,770.00
Grooving Insert with 1.5/2/3/4/5 MM Width Kindly Check Size you need in Variation.
MGMN comes in many brands but suitable to korloy grooving holder. its and ISO insert.
Tabikut
1 mm Carbide Endmill 45 HRC...
₹ 260.00
1 mm Carbide Endmill 45 HRC PACK OF 2Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Wine Coating TiALin Coating, Endmill for Better Life and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing
Size of Carbide Endmill 45 HRC: 1mm
Tabikut
12mm Carbide Endmill 60 HRC...
from ₹ 2,006.00
12mm Carbide Endmill 60 HRC 4 FlutesSolid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill etc, Plastic Packaging for non breakable packing
Tabikut
Corner Radius Endmill 4 mm ...
₹ 295.00
A Corner radius endmill End Mill is usually used to add a specific radius to a workpiece, operation to remove a sharp edge or burr
or using in some finishing operation
most cutters comes with 0.5 mm , 1 mm 1.5 mm even 2 or 3 mm radius please choose as per the requirment.
Tabikut
3mm Carbide Ballnose 60 HRC...
₹ 531.00
3mm Carbide Ballnose 60 HRC Shank 3 mm and 4 mm pack of 2UPTO 6 MM 50 mm Length price is for 2 Nos. If you order 1 quantity you will get 2 pcs 460 rs. price is for 2 nos. 1 will cost 230 rs. only.
Ballnose are 2 flutes and Endmills are 4 flutes
Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing
55 HRC AND 60 HRC LOOK SIMILAR BUT THERE IS DIFFRENCE IN QUALITY AND MATERIAL , 60 HRC CAN ALSO BE USED FOR STAINLESS STEEL
Tabikut
SPMG110408 TB40G Carbide Dr...
₹ 2,301.00
SPMG110408 U drill mostly range from 34MM,34.5MM,35MM,35.5MM,36MM,36.5MM,37MM,37.5MM,38MM,38.5MM,39MM,39.5MM,40MM,40.5MM,,41MM
Cutting speed Vc 150-220 m/min , feed 0.05-0.12 this is general recommendation you need to do some trial to find out best suitable parameters.
This is multi grade used on mostly all material , 1 box contain 10 inserts.
Tabikut
6mm 3 flute endmill 50/75 m...
from ₹ 523.00
6mm 3 flute endmill 50/75 mm long DLC coated pack of 13 Flute Carbide Endmills are used for non-ferrous materials and soft materials like aluminum, brass, copper, silver, and gold.
These DLC-coated endmills are for longer life on aluminum or sticky material machining.
The advantage of DLC coating is it reduces friction and makes the chip evacuation more smooth and better surface quality
The large core diameter is more stable
Negative rake angle design enhances the rigidity of the tool
TF25 carbide rod for soft material.
Tabikut
Tabikut JDMT070204/8R TP312...
₹ 2,065.00
JDMT07 is small isnert for usage on finishing purpose with small JDMT cutter body , Indexable cutter for this insert start from diameter 8 mm (1 pocket ) and 10 mm with 2 pockets Inserts used For Milling Operation , this is multi grade can be used for steel , stainless steel and other machining of forging etc.
Tabikut
12 Mm Carbide Ballnose 55 H...
from ₹ 1,291.00
12 Mm Carbide Ballnose 55 HRC 2 Flutes, Shank 12 MM Flute Length 24 Mm Total Length Is 75/100/150/200 MmSolid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill , Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing
Flute Length of the Ballnose is double of diameter if the diameter is 1 mm flute length will be 2 mm same for other sizes, if the total length increase flute length remains same of double of diameter.