Tabikut

Tabikut 6 mm Shank 4 mm Endmill 55 ... ₹ 443.00

6 mm Shank 4 mm Endmill 55 HRC Tabikut pack of 1Carbide Endmill-55 HRC SPECIAL SIZE OF 4 MM CUTTING DIA 6 MM SHANK Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Black Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing

wnmg080404/08/12 cx for TABIKUT Steel & Stainless Steel Mild Steel Pack Of 10

Tabikut wnmg080404/08/12 cx for TAB... ₹ 1,711.00

This Turning insert is for steel and stainless steel and its performance is amazing for finishing and roughing both purpose just try once and beat your current insert performance

TABIKUT APMT1604 TF309 Carbide Insert .8 Insert apmt16

Tabikut TABIKUT APMT1604 TF309 Carb... ₹ 1,428.00

WE SELL ORIGINAL INSERTS ONLY APMT1604 TF309 grade TF309 Grade is for general soft machining and Carbide insert for Steel and Stainless Steel machining with or without coolant , used in any suitable cutter for BAP400R and this is used in milling machine mainly. Suitable cutter any cutter which suits APMT1604 insert.For steel , mild steel , hrc upto 45-55 with and without coolantAPMT1604 for BAP400R cutters brown coatedSUITABLE TO ALL MILLING CUTTER FOR APMT1604

Tabikut Micro Endmill 0.6 Mm 4mm Sh... ₹ 561.00

Micro Endmill 0.6 mm with 2 Flutes and 4 mm Shank 1.2 mm Flute Length

Tabikut 2.5 Mm Carbide Endmill 60 H... ₹ 519.00

UPTO 6 MM 50 mm Length price is for 2 Nos. If you order 1 quantity you will get 2 pcs 440 rs. price is for 2 nos. 1 will cost 220 rs. only. Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing 55 HRC AND 60 HRC LOOK SIMILAR BUT THERE IS A DIFFERENCE IN QUALITY AND MATERIAL, 60 HRC CAN ALSO BE USED FOR STAINLESS STEEL.

Tabikut 2 flute 6 mm cutter 55 hrc ... ₹ 270.00

6 mm 2 flute endmill used for 50/75/100/150mm long metal and wood

Corner Radius Endmill 12 mm in 0.5 and 1 mm radius pack of 1

Tabikut Corner Radius Endmill 12 mm... from ₹ 1,545.00

A Corner radius endmill End Mill is usually used to add a specific radius to a workpiece, operation to remove a sharp edge or burr or using in some finishing operation most cutters comes with 0.5 mm , 1 mm 1.5 mm even 2 or 3 mm radius please choose as per the requirment.

CCMT060204/08 t20 grade TABIKUT Carbide Insert For Steel Black Pack Of 10

Tabikut CCMT060204/08 t20 grade TAB... ₹ 1,298.00

CCMT060204/08 Steel & stainless steel Grade Used in boring bar for boring application Double Coated for heat resistant.

Tabikut 1.5 Mm Carbide Ballnose 60 ... ₹ 578.00

UPTO 6 MM 50 mm Length price is for 2 Nos. If you order 1 quantity you will get 2 pcs 490 rs. price is for 2 nos. 1 will cost 295 rs. only. Ballnose are 2 flutes and Endmills are 4 flutes 1.5 mm Carbide Ballnose 60 HRC PACK OF 2Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze Tisin Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for nonbreakable packing Size of Carbide Ballnose 60 HRC: 1.5mm 55 HRC AND 60 HRC LOOK SIMILAR BUT THERE IS DIFFERENCE IN QUALITY AND MATERIAL, 60 HRC CAN ALSO BE USED FOR STAINLESS STEEL

1.5 ISO External Threading Tabikut Carbide

16ER/IR 1.5 ISO External/Internal Threading insert Pack Of 10

Tabikut 16ER/IR 1.5 ISO External/In... ₹ 2,537.00

SELECT EXTERNAL AND INTERNAL CAREFULLY. High profile accuracy. Parameters are mentioned on the Box back side suitable to mostly steel grade , stainless steel grade Prevents chip curling, thus less tool breakage.

Tabikut 20 Mm Carbide Endmill 55 HR... from ₹ 5,328.00

20 mm Carbide Endmill 55 HRC 20 MM In 20 Mm Shank 4 Flutes Total Length Is 100/150/200 MMSolid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing

TABIKUT APMT160420 T20 Carbide Insert 2 mm

Tabikut APMT160420 T20 TABIKUT Carb... ₹ 2,360.00

WE SELL ORIGINAL INSERTS ONLY APMT160420 T20 grade T20 Grade is for general soft machining and Carbide insert for Steel and Stainless Steel machining with or without coolant , used in any suitable cutter for BAP400R and this is used in milling machine mainly. Suitable cutter any cutter which suits APMT1604 insert.For steel , mild steel , hrc upto 45-55 with and without coolantAPMT1604 for BAP400R cutters brown coatedSUITABLE TO ALL MILLING CUTTER FOR APMT1604

Tabikut 8 mm Carbide Ballnose 60 HR... ₹ 974.00

8 mm Carbide Ballnose 60 HRC PACK OF 1Ballnose are 2 flutes and Endmills are 4 flutes Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing 55 HRC AND 60 HRC LOOK SIMILAR BUT THERE IS DIFFERENCE IN QUALITY AND MATERIAL, 60 HRC CAN ALSO BE USED FOR STAINLESS STEEL

12 mm Carbide Endmill 45 HRC 4 Flutes 75/100 PACK OF 1

Tabikut 12 mm Carbide Endmill 45 HR... from ₹ 1,023.00

12 mm Carbide Endmill 45 HRC 4 Flutes 75/100 PACK OF 1Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Wine Coating TiALin Coating, Endmill for Better Life and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmThey are used for Face mills, Shoulder mills, side mills, etc, and Plastic Packaging for non-breakable. Pack of 1 means Qty. 1 Pack of 2 means price is for 2 nos.

Sold out

TNMG160408 MF T15 TABIKUT carbide insert for steel black pack of 10

TNMG160408 MF T15 TABIKUT carbide insert

Tabikut TNMG160408 MF T15 TABIKUT c... ₹ 1,770.00

TNMG160408 Carbide Insert with 0.8 mm Radius used on Steel , Mild Steel General Parameters are mentioned on box 1 Box contain 10 inserts. This is Steel Grade not cast iron

Tabikut 6 mm Shank 3 mm Endmill 55 ... ₹ 443.00

6 mm Shank 3 mm Endmill 55 HRC Tabikut pack of 1Carbide Endmill-55 HRC SPECIAL SIZE OF 3 MM CUTTING DIA 6 MM SHANK Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Black Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle , Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill etc, Plastic Packaging for non-breakable packing

16 mm 3 flute endmill 100/150 mm long DLC coated pack of 1

Tabikut 16 mm 3 flute endmill 100/1... from ₹ 3,945.00

3 Flute Carbide Endmills are used for non-ferrous materials and soft materials like aluminum, brass, copper, silver, and gold. These DLC-coated endmills are for longer life on aluminum or sticky material machining. The advantage of DLC coating is it reduces friction and makes the chip evacuation more smooth and better surface quality The large core diameter is more stable A negative rake angle design enhances the rigidity of the tool TF25 carbide rod for soft material.

DNMG150608 PM 4509 Tabikut Pack of 10 Steel Grade

Tabikut DNMG150608 PM 4509 Tabikut ... ₹ 2,218.00

DNMG150608 PM 4509 Carbide Insert with 0.8 mm Radius used on Steel , Mild Steel General Parameters are mentioned on box 1 Box contain 10 inserts. This is Steel Grade not cast iron

Tabikut TABIKUT R6 Carbide Insert R... from ₹ 10,030.00

Carbide insert for Steel and Stainless Steel machining with or without coolant , used in any suitable cutter for EMRW6R and this is used in milling machine mainly. Suitable cutter any cutter which suits RPMT1204 insert. For steel , mild steel , hrc upto 45-55 with and without coolantR6 for EMRW6R-CUTTER BODYcoatedSUITABLE TO ALL MILLING CUTTER FOR R61204

RDMT1204 TF309 Grade Tabikut R6 insert pack of 10

Tabikut RDMT1204 TF309 Grade Tabiku... ₹ 1,298.00

WE SELL ONLY ORIGINAL INSERTS RDMT1204 TF309 IS MULTIGRADE WITH LONGER LIFE Carbide insert for Steel and Stainless Steel machining with or without coolant , used in any suitable cutter for EMRW6R and this is used in milling machine mainly. Suitable cutter any cutter which suits RPMT1204 insert.For steel , mild steel , hrc upto 45-55 with and without coolantR6 for EMRW6R-CUTTER BODYcoatedSUITABLE TO ALL MILLING CUTTER FOR R61204