All

16 ER/IR 14W External/Internal Threading CRM carbide Insert pack of 10

CRM 16 ER/IR 14W External/Inter... ₹ 2,242.00

SELECT EXTERNAL OR INTERNAL CAREFULLY. CRM EXTERNAL HAS YELLOW BOX AND INTERNAL HAS BLUE BOX High profile accuracy. Parameters are mentioned on the Box back side suitable to mostly steel grade , stainless steel grade Prevents chip curling, thus less tool breakage.

Kataria 6 mm ballnose uncoated for ... ₹ 614.00

6 mm ballnose uncoated for wood cutting router cutting tool pack of 1This 6 mm ball nose is mainly used for non-ferrous materials like wood and mdf board used on router machines.

Mars-Tech ER 50 COLLET DIA 32 PACK OF 1 ₹ 1,866.00

The standard ER collet is the most widely used clamping system in the world.Made from Alloy spring steel and fully hardened these ER collets are ideal for many machining applications including boring, milling, reaming, tapping and grinding. Unless specified differently all of our ER collets feature runout of 0.010 micron or less. ,ER collet sizes start at ER8 through ER50. ER50 series collets have a capacity of 6mm-34mm. Each ER50 collet has a range of (2 mm). The size indicated on the collet is the largest size it can hold and can be collapsed smaller within its collapse range of (1.8mm). For example, ER50-32mm can grab a round shank from 32mm diameter to 30.2mm diameter.

WIDIA DCMT11T304 MP WK20CT cast iron grade pack of 10

WIDIA WIDIA DCMT11T304 MP WK20CT ... ₹ 2,537.00

WE SELL ONLY ORIGINAL INSERTS WIDIA WK20CT GRADE IS CAST IRON GRADE AND CAN ALSO WORK ON NON FERROUS MATERIAL

Taegutec WNMG060408 MT TT7310 cast iron grade pack of 10

TaeguTec Taegutec WNMG060408 MT TT73... ₹ 2,124.00

WE SELL ONLY ORIGINAL INSERTS WNMG IS MOST COMMON AND ECONOMIC TURNING INSERTS TT7310 is cast iron grade and can also work on non ferrous materials.

Taegutec TNMG160408/04 MT TT7015 cast iron grade pack of 10

TaeguTec Taegutec TNMG160408/04 MT T... ₹ 2,183.00

WE SELL ONLY ORIGINAL INSERTS TNMG IS MOST COMMON AND ECONOMIC TURNING INSERTS TT7015 is cast iron grade and can also work on non ferrous materials.

Taegutec CCMT09T308/04 MT TT7015 cast iron insert pack of 10

TaeguTec Taegutec CCMT09T308/04 MT T... ₹ 2,183.00

WE SELL ONLY ORIGINAL INSERTS CCMT is most common boring inserts TT7015 is cast iron grade and can also work on non ferrous materials.

Taegutec CNMG120404 MT TT5080 pack of 10

TaeguTec Taegutec CNMG120404 MT TT50... ₹ 2,773.00

WE SELL ONLY ORIGINAL INSERTS CNMG Insert is commonly used for turning application TT5080 Grade is for Stainless Steel , High temperature alloy , forging. can work on P and M grade of steel and stainless steel.

Taegutec CCMT060204 FG TT5080 1 box pack of 10

TaeguTec Taegutec CCMT060204 FG TT50... ₹ 2,242.00

WE SELL ONLY ORIGINAL INSERTS CCMT060204 Is most commonly boring insert used for boring application TT5080 Grade is for Stainless Steel , High temperature alloy , forging. can work on P and M grade of steel and stainless steel.

Mars-Tech 100 mm SNMX1206 Insert Face... ₹ 13,841.00

SNMX1206 Facemill Cutter , indexable cutter body RM8 series 8 edges insert cutter body for dia 50 ,63 and 80 mm in 45 degree and 88 degree This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use SNMX1206 Of Korloy and Tabikut Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

-12% sale

Jaibros Jaibros Goodies Pack ₹ 1,769.00 ₹ 1,999.00

Jaibros Goodies Pack Contains 1. Water Flask 2. Diary 3. A Ball Pen 4. A Key Ring

Dasqua radius gauge choose from (1 to 7 mm ) pack of 1

Dasqua Dasqua radius gauge choose ... ₹ 682.00

Radius gauge is used to measure die pattern tools etc to check the radius even a round shanks , Radius of Leaves Included(mm) : 1 mm, 1.25 mm, 1.5 mm, 1.75 mm, 2 mm, 2.25 mm, 2.5 mm, 2.75 mm, 3 mm, 3.5 mm, 4 mm, 4.5 mm, 5 mm, 5.5 mm, 6 mm, 6.5 mm,7 mm Quantity of Leaves : 34.0 The radius measurement is usually in metric form and measured in mm(millimeter). The material used is entirely made up of steel, but a layer or finish of satin chrome can be added since it keeps the radius gauge corrosion free and gives them more rust resistance. The blades used are of the concave and convex shape. It may be swung out of the holder case when necessary readings need to be taken as per the requirement. High quality material and precision machining process ensure product quality.• A traceable QC system is worthy of your trust.• Efficient warehouse and logistics management ensure your delivery time.• A two-year warranty makes you without the worries behind.

Dasqua radius gauge choose from (7.5 to 15 mm ) pack of 1

Dasqua Dasqua radius gauge choose ... ₹ 705.00

Radius gauge is used to measure die pattern tools etc to check the radius even a round shanks , Radius of Leaves Included(mm) : 1 mm, 1.25 mm, 1.5 mm, 1.75 mm, 2 mm, 2.25 mm, 2.5 mm, 2.75 mm, 3 mm, 3.5 mm, 4 mm, 4.5 mm, 5 mm, 5.5 mm, 6 mm, 6.5 mm,7 mm Quantity of Leaves : 34.0 The radius measurement is usually in metric form and measured in mm(millimeter). The material used is entirely made up of steel, but a layer or finish of satin chrome can be added since it keeps the radius gauge corrosion free and gives them more rust resistance. The blades used are of the concave and convex shape. It may be swung out of the holder case when necessary readings need to be taken as per the requirement. High quality material and precision machining process ensure product quality.• A traceable QC system is worthy of your trust.• Efficient warehouse and logistics management ensure your delivery time.• A two-year warranty makes you without the worries behind.

Dijet WDMW080520ZTR JC8015 Dijet ... ₹ 4,425.00

DIJET ORIGINAL INSERT WDMW080520ZTR JC8015 is high feed insert suitable to SKS type cutters please ensure your cutter before buying inserts

Get Extra 1% Discount on Jaibros App only

Find anything you need

GST Input Credit

7-Day Return

Lowest Prices

Highest Quality