All products Accessories Accessories APP Accessories APP 2 All Ballnose (45 HRC) Ballnose (55 HRC) Ballnose (60 HRC) Ballnose (65 HRC) Ballnose (65 HRC) Ballnose (Inserted) Ballnose - 45 HRC Ballnose - 55 HRC Ballnose - 55 HRC 1 Ballnose - 60 HRC Ballnose - 60 HRC 1 BBT40 Holders Boring Heads BPT BT-30 Type BT-40 BCA BT-40 Type Carbide Cutters Carbide Cutters Carbide Drills CBN Inserts Ceramic Ceratizit Cermet Chamfer Cutter Chamfering Collet Chucks Collet Chuks Collet ER Types Collets - ER Type Corner Radius Endmill Cutters High Feed Cylindrical Chuks Cylndrical Chuck Dasqua Deal of the Day Deskar Dijet Drill Chuck - Keyless Drilling Insert Duracarb Edge Finders Endmill (3 Flute) DLC Endmill (45 HRC) Endmill (55 HRC) 1 Endmill (60 HRC) Endmill (65 HRC) Endmill (Inserted) Endmill - 45 HRC Endmill - 55 HRC Endmill - 55 HRC 1 Endmill - 60 HRC Endmill - 60 HRC 1 Endmill 2 Flute Endmill Ballnose - Micro ER Collets ER Nuts ER Spanners ER Tap Collets Find the Edge Gauges Grooving Inserts Grooving Work Heads - Boring High Feed Hitachi Indexable Cutters Inserted Ballnose Inserted Cutters Inserted Endmill Inserts ISO40 Holders Jaibros JXD Keyless Drill Chuck Knob - Pull Studs Knob- Pull Studs Korloy Korloy Kyocera Life Locking Device Long Neck Cutters Mars-Tech Measurings Metrology Micro Endmill Ballnose Milling Inserts Milling Opertations Miscellaneous Mitsubishi Multifunction Tools Non Standard Endmills Non-Ferrous Nuts - ER Nuts ER PCD Inserts Pull Studs Rougher Endmills Single Flute Endmill SK-40 Type Spanner - ER Spanners - ER Straight Shank Chucks Tabikut Tabikut Inserts TaeguTec Threading Application Threading Inserts Tool Boy Tools Boy Torx Keys Torx Screws Turning Holders Turning Inserts Turning Usage U Drill Widia Yuzuki Z Setter ZCCCT Zero Pre Setter Zero Setter
Mars-Tech BT40 Pull Stud In Various D... from ₹ 132.00
BT40 Pull stud used in CNC machines for BT40 holders ISO standard name is MAS403 Pull studs are an important link between machine and tool. The requirements concerning accuracy, rigidity and reliability are very high. Pull studs of minor quality not only decrease the performance of the machine, they are even a safety risk. A breaking pull stud might cause severe damage on machine and workpiece and even injuries on persons. made of special steel for higher rigidity proper heat treated ,
Mars-Tech Keyless Drill Chuck 1-13mm ... ₹ 1,743.00
MARS-TECH Heavy Duty Keyless Drill chucks are used for CNC machining center and milling machine  Special Designed & manufactured against for super heavy torque use.  Owning to inspecting strictly & with excellent RUNOUT accuracy and Quality guaranteed the gripping power double than general brand Avoid the drill dropped when used in instaneous change of direction and equipped with spanner hole for tightening prefect safety. Accuracy 50 mm Length within 0.05mm  Spanner is optional not included with chuck. YELLOW TIATNIUM COATED JAWS FOR LONG LASTING LIFE.
Mars-Tech ER 11 M Type Spanner Red Grip from ₹ 181.00
ER11M Wrench is made from high quality alloy steel ,Thick material allows high torque without bending,5 point contact ensures no distortion of collet nut while tightening,ER11 Wrench works on all of our M Type collet chucks that take ER11 collets
Mars-Tech Chamfer Cutter 45 Degree T... ₹ 1,805.00
Chamfer cutter for 45 degree suitable to TCMT insert  CHAMFER CUTTER AFM45-TC16-C20-Z1-DIA 22 TO 40 A chamfer mill, or a chamfer cutter useful for many purposes a drill slop , remove burrs from drill hole , 45 degree angel needed for any machining requirement. 
Mars-Tech ER11M SPANNER TYPE pack of 1 ₹ 288.00
ER11M Spanner for ER11 miniature type nut , tighten it and loosen it
Mars-Tech C Type Boring Head 75 MM ₹ 8,184.00
C-type Boring head with 20 mm Boring Tool  Graduation 1 Div. = .01 mm Boring Hole 20 mm Offset - 25mm Boring Capacity - 20 mm to 200 mm Back Thread - 1.5" x 18 TPI Can be used with different Shanks R8,MT2,MT3,ISO30,ISO40,BT40,BT50,ETC. You can use indexable boring bar with 20 mm shank to start minimum diameter of boring.  Length of the boring should be LD3 if boring bar is 20 mm depth of boring should limit to 60 mm in order to escape chattering.

GST Input Credit

Get Business Invoice and get 100% GST Input Credit for your Order.

7-Day Return

If you dont like the Product, Return it within 7 Days and get 100% refund.

Lowest Prices

We are offering Products at Lowest Prices in the Industry*.

Highest Quality

We strive to provide best quality product .
Jaibros is a Registered Trademark owned by HAKUNA MATATA RETAIL PRIVATE LIMITED 2009-