All products 5 & 6 Flute Endmills Accessories Accessories APP Accessories APP 2 All Ballnose (45 HRC) Ballnose (55 HRC) Ballnose (60 HRC) Ballnose (65 HRC) Ballnose (65 HRC) Ballnose (Inserted) Ballnose - 45 HRC Ballnose - 55 HRC Ballnose - 55 HRC 1 Ballnose - 60 HRC Ballnose - 60 HRC 1 Ballnose 4 Flute (55HRC) BBT40 Holders Boring Heads BPT BT-30 Type BT-40 BCA BT-40 Type Carbide Cutters Carbide Cutters Carbide Drills CARBIDE15 CBN Inserts Ceramic Ceratizit Cermet Chamfer Cutter Chamfering Collet Chucks Collet Chuks Collet ER Types Collets - ER Type Corner Radius Endmill Cutters High Feed Cylindrical Chuks Cylndrical Chuck Dasqua Deal of the Day Deskar Dijet Drill Chuck - Keyless Drilling Insert Duracarb Edge Finders Endmill (3 Flute) DLC Endmill (45 HRC) Endmill (55 HRC) 1 Endmill (60 HRC) Endmill (65 HRC) Endmill (Inserted) Endmill - 45 HRC Endmill - 55 HRC Endmill - 55 HRC 1 Endmill - 60 HRC Endmill - 60 HRC 1 Endmill 2 Flute Endmill Ballnose - Micro ER Collets ER Nuts ER Spanners ER Tap Collets Find the Edge Gauges Grooving Inserts Grooving Work Heads - Boring High Feed Hitachi HRC63(Nano Coated) Indexable Cutters Inserted Ballnose Inserted Cutters Inserted Endmill Inserts INSERTS15 ISO40 Holders Jaibros JXD Keyless Drill Chuck Knob - Pull Studs Knob- Pull Studs Korloy Korloy Kyocera Life Locking Device Long Neck Cutters Mars-Tech Measurings Metrology Micro Drills Micro Endmill Ballnose Milling Inserts Milling Opertations Miscellaneous Mitsubishi Multifunction Tools Non Standard Endmills Non-Ferrous Nuts - ER Nuts ER PCD Inserts Promo Inserts Pull Studs Rougher Endmills Single Flute Endmill SK-40 Type Spanner - ER Spanners - ER Straight Shank Chucks Tabikut Tabikut Inserts TaeguTec Threading Application Threading Inserts Tool Boy Tools Boy Torx Keys Torx Screws TURNING Turning Holders Turning Inserts Turning Usage U Drill Uncoated End & Ball volume discount Wholesale Deals Widia Yuzuki Z Setter ZCCCT Zero Pre Setter Zero Setter
Mars-Tech T2139 screw for dijet and w... from ₹ 1,110.00
T2139 screws are used only for T2139 type cutters these are high quality  1 Packet Contains 10 Pcs , Choose Radius of inserts 
Mars-Tech ER 50 COLLET DIA 32 PACK OF 1 ₹ 1,866.00
The standard ER collet is the most widely used clamping system in the world.Made from Alloy spring steel and fully hardened these ER collets are ideal for many machining applications including boring, milling, reaming, tapping and grinding.  Unless specified differently all of our ER collets feature runout of 0.010 micron or less. ,ER collet sizes start at ER8 through ER50. ER50 series collets have a capacity of 6mm-34mm. Each ER50 collet has a range of (2 mm). The size indicated on the collet is the largest size it can hold and can be collapsed smaller within its collapse range of (1.8mm). For example, ER50-32mm can grab a round shank from 32mm diameter to 30.2mm diameter.
Sold out
SCODAK SCODAK Torque control torx ... ₹ 3,304.00
Torque control key is used for saving from over tightening of screw  This is T6 size comes with 2 bits long and short for T6   
Mars-Tech 3D TEST FINDER FOR all 3 ax... ₹ 49,560.00
3D TEST FINDER FOR all 3-axis Germany make 12mm shank pack of 1Made in Germany  3D tester for all 3-axis connect with us to know more about the product  guarantee and usability it can save lots of time to take offset and many more features. https://www.youtube.com/watch?v=T1vXCwSBZWs  Benefits- Ultra-slim design.- Waterproof: IP67- Robust & non-magnetic probe tips- Operates in the X, Y, and Z directions at the same time- Quick and easy to adjust thanks to new alignment technology- Mechanical end stops to protect the measurement unitApplicationIts precise and varied applications enable quick and simple identification of workpiece zero points and length dimensions. As soon as the indicators show "0", the spindle axis is located precisely on the workpiece edge.
Mars-Tech HSK63 Tool holder fixuture ... ₹ 4,213.00
HSK63 locking device is made of Ductile cast iron and light in weight
Sold out
Mars-Tech Mars-Tech ER Nut ER50UM Typ... ₹ 1,143.00
Holds all ER50 collets from 6 mm to 36 mmMade from alloy steel hardened to 54 – 56rcPrecision ground ID thread and taperHas an id thread of – M64*2.0POutside diameter is 78 MMSUITABLE SPANNER IS ER50UM AND ER50 C TYPE key to tighteninginternal cam removes collet when unscrewedMARSTECH CODE IS ER50UM TYPE NUT

GST Input Credit

Get Business Invoice and get 100% GST Input Credit for your Order.

7-Day Return

If you receive defective Product, return it within 7 Days and Get 100% refund.

Lowest Prices

We are offering Products at Lowest Prices in the Industry*.

Highest Quality

We strive to provide best quality product .
Jaibros is a Registered Trademark owned by HAKUNA MATATA RETAIL PRIVATE LIMITED 2009-