All

Tabikut APMT1135 T15 Carbide Insert... ₹ 885.00

APMT1135 T15 Carbide Insert Tabikut pack of 10WE SELL ORIGINAL INSERTS ONLY APMT1135TABIKUT Carbide insert for Steel and Stainless Steel machining with or without coolant, used in any suitable cutter for BAP300R and this is used in milling machines mainly. Suitable cutter any cutter which suits APMT1135 insert.For steel, mild steel , hrc upto 45 with coolant.APMT1135 for BAP300R cutters brown coatedSUITABLE TO ALL MILLING CUTTER FOR APMT1135

5 Carbide Endmill 55 HRC 5 mm Shank | endmill

Tabikut 5 Carbide Endmill 55 HRC 5 ... from ₹ 302.00

5 Carbide Endmill 55 HRC 5 mm Shank 4 Flutes Total Length Is 50/75/100 MMSolid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle , Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill etc, Plastic Packaging for non-breakable packing

Torx Screw 4 MM T15 High Precision ( Pack Of 10 Pcs )

Mars-Tech Torx Screw 4 MM T15 High P... from ₹ 89.00

Hardened Star Torx Screw for Milling Cutters offered are screws that come with precision design and constructed standards ,These torx screw are hardened upto 50-55 hrc for wear resistance, These Torx screw are mainly used in indexable tools as Boring bar , Insert cutter , milling cutter ,They are precise screw for better grip of carbide insert with pocket

Tabikut 2 mm Carbide Endmill 55 HRC... ₹ 342.00

Solid Carbide Cutter are used to machine Hard and tough Material , Steel , Alloy Steel , Cast iron , stainless steel and many other material grades. Bronze TiSiN Coating , Endmill for Better Life and wear resistance.35 Degree Helix Angel , Grain Size 0.5μmUsed for Face Mill , Shoulder mill , side mill etc ,Plastic Packaging for non breakable packing

Mars-Tech BT40ER32 UM collet chuck-70... from ₹ 1,202.00

BT40 Tool Holder accepts all ER32 collets ER32 Collets range from 1 mm to 20 mm Thread inside internal stop screwMade from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundCoolant through capabilityGage length is 70mm,100MM,150MM,200MMRear thread for pull stud is M16 X 2.0 All holders have capability to become through coolant by simply removing screw in the center by allen key

10 mm 1 pocket Indexable Inserted Endmill Dia 10 Suitable to APMT1135

10 mm 1 pocket Indexable Inserted Endmill

Mars-Tech 10 mm 1 pocket Indexable In... from ₹ 635.00

This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use any ISO inserts of APMT1135 into this

Tabikut CARBIDE INSERT LNMU0303 Hig... from ₹ 1,357.00

HIGH FEED MILLING INSERTS WITH 4 CUTTING EDGES 1.2 mm radius Carbide insert for Steel and Stainless Steel machining with or without coolant , used in any suitable cutter for LNMU and this is used in milling machine mainly. Suitable cutter any cutter which suits LNMU0303 insert. For steel , mild steel , hrc upto 45-55 with and without coolant

25 mm Indexable Inserted Endmill shank 25 mm

Mars-Tech 25 mm Indexable Endmill Sha... from ₹ 1,264.00

25 mm Indexable Endmill Shank25 Mm 2 Pocket Suitable To APMT1604This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use any ISO inserts of APMT1604 into this Different Lengths and Different Shank sizes please choose before adding to the cart

4 mm Carbide Ballnose 55 HRC 2 flutes Tabikut

Tabikut 4 mm Carbide Ballnose 55 HR... from ₹ 287.00

4 mm Carbide Ballnose 55 HRC 2 flutes Tabikut50 mm Length price is for 2 Nos. you order 1 quantity you will get 2 pcs 380 rs. price is for 2 nos. 1 will cost 190 rs. only. Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill etc, Plastic Packaging for non breakable packing Flute Length of Ballnose is double of diameter if diameter is 1 mm flute length will be 2 mm same for other sizes , if total length increase flute length remain same of double of diameter.

6 Mm Carbide Ballnose 55 HRC 2 Flutes ,Shank 6 MM Flute Length 12 Mm Total Length Is 50/75/100 Mm

Tabikut 6 Mm Carbide Ballnose 55 HR... from ₹ 413.00

6 Mm Carbide Ballnose 55 HRC 2 Flutes, Shank 6 MM Flute Length 12 Mm Total Length Is 50/75/100 MmSolid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle , Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill etc, Plastic Packaging for non-breakable packing The flute Length of the Ballnose is double of diameter if the diameter is 1 mm flute length will be 2 mm same for other sizes, if the total length increase flute length remains same of double of diameter.

Mars-Tech BT40 Pull Stud In Various D... from ₹ 132.00

BT40 Pull stud used in CNC machines for BT40 holders ISO standard name is MAS403 Pull studs are an important link between machine and tool. The requirements concerning accuracy, rigidity and reliability are very high. Pull studs of minor quality not only decrease the performance of the machine, they are even a safety risk. A breaking pull stud might cause severe damage on machine and workpiece and even injuries on persons. made of special steel for higher rigidity proper heat treated ,

TDC Grooving Insert 2/3/4 mm Suitable To Taegutec Holder Pack Of 10

Tabikut TDC Grooving Insert 2/3/4 m... from ₹ 1,475.00

Grooving Insert with 2/3/4 MM Width Kindly Check Size you need in Variation.

Mars-Tech Grey Torx Screw 2.5 Mm 6/7/... ₹ 471.00

Grey Torx Screw are also normal screw quality its just a grey coating Hardened Star Torx Screw for Milling Cutters offered are screws that come with precision design and constructed standards ,These torx screw are hardened upto 50-55 hrc for wear resistance, These Torx screw are mainly used in indexable tools as Boring bar , Insert cutter , milling cutter ,They are precise screw for better grip of carbide insert with pocket

Mars-Tech 25 mm Indexable Inserted En... from ₹ 1,204.00

This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC not to wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use any ISO inserts of APMT1135 into this Different Lengths and Different Shank sizes please choose before adding to the cart

Tabikut 1 mm Carbide Endmill 55 HRC... ₹ 342.00

1 mm Carbide Endmill 55 HRC PACK OF 2Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing Size of Carbide Endmill 55 HRC: 1mm

Tabikut APMT1604 T15 grade Carbide ... ₹ 1,239.00

APMT1604 T15 grade Carbide Insert Tabikut pack of 10APMT1604 T15 . T15 Grade is for general machining steel stainless steel Forging etc. Carbide inserts for Steel and Stainless Steel machining with or without coolant, are used in any suitable cutter for BAP400R, and this is used in milling machines mainly. Suitable cutter any cutter which suits the APMT1604 insert.For steel, mild steel, HRC upto 45-55 with and without coolantAPMT1604 for BAP400R cutters brown coatedSUITABLE TO ALL MILLING CUTTERS FOR APMT1604

BT40 fmb 22 mm Face milling holder arbour pack of 1

Mars-Tech BT40 fmb 22 mm Face milling... from ₹ 1,505.00

BT40 facemill holder also called facemill arbour and facemill adaptor BT40 FMA22 Is mainly used to hold Modular Indexable Cutter with Internal hole of 16 mm any cutter can come with a 22 mm Internal thread but normally 50 mm AND 63 mm Cutters are common in this range. Made from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundGage length is 50MM,100MM,150MM,200MM,250MM,300MMRear thread for pull stud is M16 X 2.0

Tabikut 1.5 mm Carbide Endmill 55 H... ₹ 342.00

1.5 mm Carbide Endmill 55 HRC PACK OF 2Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc. Plastic Packaging for non-breakable packing Size of Carbide Endmill 55 HRC: 1.5mm

Torx Screw 3.5 Mm T15 High Precision( Pack Of 10 Pcs )

Mars-Tech Torx Screw 3.5 Mm T15 High ... from ₹ 106.00

Hardened Star Torx Screw for Milling Cutters offered are screws that come with precision design and constructed standards ,These torx screw are hardened upto 50-55 hrc for wear resistance, These Torx screw are mainly used in indexable tools as Boring bar , Insert cutter , milling cutter ,They are precise screw for better grip of carbide insert with pocket

3 mm Carbide Ballnose 55 HRC 2 50/75/100 Flutes tabikut

Tabikut 3 mm Carbide Ballnose 55 HR... from ₹ 341.00

3 mm Carbide Ballnose 55 HRC 2 50/75/100 Flutes tabikut50 mm Length price is for 2 Nos. If you order 1 quantity you will get 2 pcs 312 rs. price is for 2 nos. 1 will cost 156 rs. only. Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron , stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing The flute Length of the Ballnose is double of diameter if the diameter is 1 mm flute length will be 2 mm same for other sizes, if the total length increase flute length remains the same as double of diameter.

Get Extra 1% Discount on Jaibros App only

Find anything you need

GST Input Credit

7-Day Return

Lowest Prices

Highest Quality