BT40 JT6 Adaptor Holder For JT6 arbour

Brand - Mars-Tech

₹ 1,505.00

SKU: JBRS0450

0 LEFT IN STOCK

Get Rs.50 Off on Prepaid Orders above Rs.500 via Razorpay Gateway. (Discount will be applied During Checkout at Payment Gateway) (No Code Required)

Product description

BT40 JT6 holders are mainly used to hold JT6 Female Taper , This holder have JT6 Male taper if anything like drill chuck have internal taper of JT6 so it can hold it easily with rigidity.

Made from alloy steel hardened to 54 – 56rc
Balanced to G6.3 at 12,000 rpms
Concentricity is less than .005 micron upto 100 Length and 0.012 upto 200 Length
All critical tool holder surfaces precision ground
Rear thread for pull stud is M16 X 2.0

Products are usually delivered in 3-7 days depending upon your location.

0 have this item in their cart.

Related Product

Mars-Tech Keyless Drill Chuck 1-13mm ... ₹ 1,743.00

MARS-TECH Heavy Duty Keyless Drill chucks are used for CNC machining center and milling machine Special Designed & manufactured against for super heavy torque use. Owning to inspecting strictly & with excellent RUNOUT accuracy and Quality guaranteed the gripping power double than general brand Avoid the drill dropped when used in instaneous change of direction and equipped with spanner hole for tightening prefect safety. Accuracy 50 mm Length within 0.05mm Spanner is optional not included with chuck. YELLOW TIATNIUM COATED JAWS FOR LONG LASTING LIFE.

Mars-Tech Keyless Drill Chuck 3-16mm ... ₹ 2,007.00

MARS-TECH Heavy Duty Keyless Drill chucks are used for CNC machining center and milling machine Special Designed & manufactured against for super heavy torque use. Owning to inspecting strictly & with excellent RUNOUT accuracy and Quality guaranteed the gripping power double than general brand Avoid the drill dropped when used in instaneous change of direction and equipped with spanner hole for tightening prefect safety. Accuracy 50 mm Length within 0.05mm Spanner is optional not included with chuck. YELLOW TIATNIUM COATED JAWS FOR LONG LASTING LIFE.

Mars-Tech BT40 Pull Stud In Various D... from ₹ 132.00

BT40 Pull stud used in CNC machines for BT40 holders ISO standard name is MAS403 Pull studs are an important link between machine and tool. The requirements concerning accuracy, rigidity and reliability are very high. Pull studs of minor quality not only decrease the performance of the machine, they are even a safety risk. A breaking pull stud might cause severe damage on machine and workpiece and even injuries on persons. made of special steel for higher rigidity proper heat treated ,

Mars-Tech BT40 locking device Tool Bo... ₹ 2,227.00

BT40 Locking device with Vertical and Horizontal mode to tighten Nut and Pull stud made of Steel and long life. cone for taper is made of aluminium . 3.5 kgs of 1 pc.

Related Products

Mars-Tech Keyless Drill Chuck 1-13mm ... ₹ 1,743.00

MARS-TECH Heavy Duty Keyless Drill chucks are used for CNC machining center and milling machine Special Designed & manufactured against for super heavy torque use. Owning to inspecting strictly & with excellent RUNOUT accuracy and Quality guaranteed the gripping power double than general brand Avoid the drill dropped when used in instaneous change of direction and equipped with spanner hole for tightening prefect safety. Accuracy 50 mm Length within 0.05mm Spanner is optional not included with chuck. YELLOW TIATNIUM COATED JAWS FOR LONG LASTING LIFE.

Mars-Tech Keyless Drill Chuck 3-16mm ... ₹ 2,007.00

MARS-TECH Heavy Duty Keyless Drill chucks are used for CNC machining center and milling machine Special Designed & manufactured against for super heavy torque use. Owning to inspecting strictly & with excellent RUNOUT accuracy and Quality guaranteed the gripping power double than general brand Avoid the drill dropped when used in instaneous change of direction and equipped with spanner hole for tightening prefect safety. Accuracy 50 mm Length within 0.05mm Spanner is optional not included with chuck. YELLOW TIATNIUM COATED JAWS FOR LONG LASTING LIFE.

Mars-Tech BT40 Pull Stud In Various D... from ₹ 132.00

BT40 Pull stud used in CNC machines for BT40 holders ISO standard name is MAS403 Pull studs are an important link between machine and tool. The requirements concerning accuracy, rigidity and reliability are very high. Pull studs of minor quality not only decrease the performance of the machine, they are even a safety risk. A breaking pull stud might cause severe damage on machine and workpiece and even injuries on persons. made of special steel for higher rigidity proper heat treated ,

Mars-Tech BT40 locking device Tool Bo... ₹ 2,227.00

BT40 Locking device with Vertical and Horizontal mode to tighten Nut and Pull stud made of Steel and long life. cone for taper is made of aluminium . 3.5 kgs of 1 pc.

They are must-haves