Indexable Cutters

sale

Mars-Tech 16mm cutter 2 pocket Suitab... from ₹ 550.00 ₹ 3,000.00

This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use any ISO inserts of APMT1135 into this. Different Lengths and Different Shank size please choose before adding to cart

Mars-Tech 20 mm Indexable Inserted En... from ₹ 800.00

This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use any ISO inserts of APMT1135 into this Different Lengths and Different Shank sizes please choose before adding to the cart

Mars-Tech 12 mm Indexable Inserted En... from ₹ 550.00

This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of APMT1135 into this

Sold out

10 mm 1 pocket Indexable Inserted Endmill

Mars-Tech 10 mm 1 pocket Indexable In... from ₹ 519.00

This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use any ISO inserts of APMT1135 into this

25mm Indexable Inserted Endmill Shank 25 Mm

Mars-Tech 25 mm Indexable Inserted En... from ₹ 1,000.00

This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC not to wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use any ISO inserts of APMT1135 into this Different Lengths and Different Shank sizes please choose before adding to the cart

25 mm Indexable Endmill Shank25 Mm 2 Pocket Suitable To APMT1604

Mars-Tech 25 mm Indexable Endmill Sha... from ₹ 950.00

This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use any ISO inserts of APMT1604 into this Different Lengths and Different Shank sizes please choose before adding to the cart

32 mm Indexable Inserted Endmill APMT1604

32 mm Indexable Inserted Endmill Dia 32 mm 3 Pocket Suitable To APMT1604

Mars-Tech 32 mm Indexable Inserted En... from ₹ 1,200.00

This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of APMT1135 into this Different Lengths and Different Shank size please choose before adding to cart BELOW IS A VIDEO FOR VIEW OF PRODUCT QUALITY AND BASIC DETAILS.

Mars-Tech 14 mm Indexable Endmill Sui... ₹ 800.00

This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use any ISO inserts of APMT1135 into this

BAP400R-50-22-4T Face Milling Cutter Dia 50 Modular Type Suitable To APMT1604 Insert Bull Cutter

Mars-Tech BAP400R-50-22-4T Face Milli... ₹ 1,080.00

Dia 50 cutter for APMT1604 insert , facemill cutter 50 mm apmt1604 Shank Holder FMB-22 This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use APMT1604 Of Tabikut Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert. HAVE A VIDEO VIEW BELOW WITH BASIC DETAILS

Chamfer Cutter 45 Degree TCMT16T3 6-24 RANGE

Mars-Tech Chamfer Cutter 45 Degree TC... ₹ 1,250.00

Chamfer cutter for 45 degree suitable to TCMT insert CHAMFER CUTTER AFM45-TC16-C16-Z1-DIA 6 TO 24 A chamfer mill, or a chamfer cutter useful for many purposes a drill slop , remove burrs from drill hole , 45 degree angel needed for any machining requirement.

Sold out

BAP400R-63-22-4T Face Milling Cutter Dia 63 Modular Type Suitable To APMT1604 Insert Bull Cutter

BAP400R-63-22-4T Face Milling Cutter Dia

Mars-Tech BAP400R-63-22-4T Face Milli... ₹ 1,280.00

Dia 63 cutter for APMT1604 insert , facemill cutter 63 mm apmt1604 Shank Holder FMB-22 This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use APMT1604 Of Tabikut Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

Mars-Tech 50 Mm Bull Cutter For Die A... from ₹ 1,100.00

EMRW-6R-50-22-4T suitable to R6 insert This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of RPMT1204/RDKW1204/R6 OF mostly brand into this , Recommended Suitable insert for this cutter is TABIKUT Carbide Insert

Mars-Tech 8/10/12 mm cutter suitable ... from ₹ 1,500.00

ESE-C10-10-100L-2T SCREW 1.8X4 MM T6 KEY ESE-C12-12-120L-2T SCREW 1.8X4 MM T6 KEY ESE-C14-14-150L-3T SCREW 1.8X4 MM T6 KEY This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use JDMT070204 For HITACHI Brand Insert into this , If any other brand have same insert can also fix to this cutter body

40 MM Indexable Inserted Endmill | APMT1604 insert

Mars-Tech 40 MM Indexable Inserted En... from ₹ 1,500.00

This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of APMT1604 into this Different Lengths and Different Shank size please choose before adding to cart HAVE A CLEAR VIEW OF PRODUCT ON VIDEO BELOW

18 mm mars-tech Indexable Inserted Endmill

Mars-Tech 18 mm Inserted Endmill Shan... from ₹ 896.00

This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of APMT1135 into this HAVE A DETAIL VIEW HERE https://www.youtube.com/watch?v=2wx3B5AEQI0 Different Lengths and Different Shank size please choose before adding to cart

Mars-Tech Chamfer Cutter 45 Degree 5-... ₹ 1,150.00

Chamfer cutter for 45 degree suitable to TCMT11 insert CHAMFER CUTTER AFM45-TC11-C16-Z1-DIA 5 TO 16 A chamfer mill, or a chamfer cutter useful for many purposes a drill slop , remove burrs from drill hole , 45 degree angel needed for any machining requirement.

Mars-Tech BAP400R-80-27-6T Face Milli... ₹ 1,950.00

Dia 80 cutter for APMT1604 insert , facemill cutter 80 mm apmt1604 Shank Holder FMB-27 This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use APMT1604 Of Tabikut Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

LNMU0303 Milling Cutter Body Dia 16 150 And 200 Long Suitable To LNMU0303 Inserts From Various Brands

Mars-Tech LNMU0303 Milling Cutter Bod... ₹ 1,600.00

EXN03-C16-16-150L-2T , EXN03-C16-16-200L-2T This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use LNMU0303 Tungaloy Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

Mars-Tech 22 mm Indexable Inserted En... from ₹ 950.00

This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machi with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use any ISO inserts of APMT1135 into this

Mars-Tech EMRW-C25-6R25-150L 25 Mm Bu... from ₹ 1,000.00

This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of RPMT1204/RDKW1204,R6 OF mostly brand into this , Suggested insert RPMT1204 OF Tabikut Brand.

Find anything you need

Indexable Cutters

GST Input Credit

7-Day Return

Lowest Prices

Highest Quality