High Feed

LNMU0303 Milling Cutter Body Dia 16 150 And 200 Long Suitable To LNMU0303 Inserts From Various Brands

Mars-Tech LNMU0303 Milling Cutter Bod... ₹ 1,600.00

EXN03-C16-16-150L-2T , EXN03-C16-16-200L-2T This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use LNMU0303 Tungaloy Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

LNMU0303 Milling Cutter Body Dia 25-200-4 TEETH Long Suitable To LNMU0303 Inserts From Various Brands

LNMU0303 Milling Cutter Body Dia 25-200-4

Mars-Tech LNMU0303 Milling Cutter Bod... ₹ 2,500.00

EXN03-C25-25-200-4T,EXN03-C25-25-150-4T This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use LNMU0303 Tungaloy Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

Mars-Tech High feed cutter Dia 50 mm ... ₹ 1,800.00

ASRF12-50-22-4T , ASRF12-63-22-4T This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use SDMT1205 Tabikut Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

Mars-Tech LNMU0303 Milling Cutter Bod... ₹ 2,000.00

EXN03-C20-20-150L-3T ,EXN03-C20-20-200L-3T This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use LNMU0303 Tungaloy Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

LNMU0303 Milling Cutter Body Modular Type Dia 50-8TEETH

Mars-Tech LNMU0303 Milling Cutter Bod... ₹ 3,500.00

EXN03-50-22-8T This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use LNMU0303 Tungaloy Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

LNMU0303 Milling Cutter Body Dia 32-200L-5TEETH Suitable To LNMU0303 Inserts From Various Brands

LNMU0303 Milling Cutter Body Dia 32-200L-5TEETH

Mars-Tech LNMU0303 Milling Cutter Bod... ₹ 3,200.00

EXN03-C32-32-200L-5T ,EXN03-C32-32-150L-5T This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use LNMU0303 Tungaloy Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

Indexable Inserted High Feed Cutter Dia 50 Mm

Mars-Tech Indexable Inserted High Fee... ₹ 1,500.00

AJX12-50-22-4T High Feed Milling Cutter FMB Dia 22 mm This is Shoulder and Face Milling Cutter high feed used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use JDMW09 from Mitsubishi Brand Insert into this , If any other brand have same insert it can also fixed to this.

Mars-Tech LNMU0303 Milling Cutter Bod... ₹ 3,000.00

EXN03-40-22-6T This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use LNMU0303 Tungaloy Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

Mars-Tech High Feed Cutter Dia 63 Mm ... ₹ 1,950.00

ASRF12-50-22-4T , ASRF12-63-22-4T This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use SDMT1205 Tabikut Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

Indexable Inserted High Feed Endmill Dia 25 Mm

Mars-Tech Indexable Inserted High Fee... ₹ 990.00

AJX09-C25-25-200L-2T This is Shoulder and Face Milling Cutter high feed used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use JDMW09 from Mitsubishi Brand Insert into this , If any other brand have same insert it can also fixed to this.

Mars-Tech WDMW06T320 High Feed insert... ₹ 1,500.00

SKS-2025-200-S25 , SKS-4050R-08-22 ,SKS-2028-40E-S25,SKS-4063R-08-27,SKS-5080R-10-27 This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use WDMW06T320 DIJETBrand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

Mars-Tech SNMX1206 Insert Facemill Di... ₹ 5,200.00

SNMX1206 Facemill Cutter , indexable cutter body RM8 series 8 edges insert cutter body for dia 50 ,63 and 80 mm in 45 degree and 88 degree This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use SNMX1206 Of Korloy and Tabikut Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

WDMW080520ZTR High Feed Insert Cutter Body

Mars-Tech WDMW080520ZTR High Feed Ins... ₹ 1,600.00

SKS-2025-200-S25 , SKS-4050R-08-22 ,SKS-2028-40E-S25,SKS-4063R-08-27,SKS-5080R-10-27 This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use WDMW080520 DIJETBrand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

50 mm roughing cutter moduler type suitable to apmt1604

Mars-Tech 50 mm roughing cutter modul... ₹ 9,800.00

This is Helical Cutter also called rougher cutter it has more pockets used for milling operation for roughing or plunging it saves time used in roughing operation also This is 50 mm moduler cutter please read details before ordering BAP400R-50-22-60M-3T-15P Suitable Insert - APMT1604 Shank Diameter for holding - 22 mm fmb holder for holding with extra long screw you need to purchase extra , you can easily get from a local shop. Cutter Diameter- 50 mm Cutting length Helical length - 60 mm Total Length - 100 mm 3 Pocket - 15 inserts will fit in one time

Mars-Tech SNMX1206 Insert Facemill Di... from ₹ 4,725.00

SNMX1206 Facemill Cutter , indexable cutter body RM8 series 8 edges insert cutter body for dia 50 ,63 and 80 mm in 45 degree and 88 degree This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use SNMX1206 Of Korloy and Tabikut Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

Indexable Inserted High Feed Endmill Dia 32 Mm

Indexable Inserted High Feed Endmill Dia 32 Mm Shank 32 Mm 2 Pocket Suitable To JDMW12 For Mitsubishi Insert

Mars-Tech Indexable Inserted High Fee... ₹ 1,500.00

AJX12-C32-32-200L-2T HIGH FEED CUTTER This is Shoulder and Face Milling Cutter high feed used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use JDMW120420 from Mitsubishi Brand Insert into this , If any other brand have same insert it can also fix to this cutter.

WNMU08 Cutter Body For Dia 80 mm Pack Of 1

Mars-Tech WNMU08 Cutter Body For Dia ... ₹ 8,400.00

This cutter is suitable to any brand of WNMU08 -6 Pocket 90 Degree High Feed Cutter.

LNMU0303 Milling Cutter Body Modular Type Dia 63-10

Mars-Tech LNMU0303 Milling Cutter Bod... ₹ 4,725.00

EXN03-63-22-10T This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use LNMU0303 Tungaloy Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

AJX09-50-22-5T JDMW09 Cutter 50mm in 5 Pockets

Mars-Tech AJX09-50-22-5T JDMW09 Cutte... ₹ 1,800.00

AJX09 is suitable to JDMW09 insert of any Brand will suit this cutter , this is high feed insert cutter

Sold out

Mars-Tech WDMW06T320 High Feed Insert... ₹ 1,600.00

SKS-2025-200-S25 , SKS-4050R-08-22 ,SKS-2028-40E-S25,SKS-4063R-08-27,SKS-5080R-10-27 This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use WDMW06T320 DIJETBrand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

Find anything you need

GST Input Credit

7-Day Return

Lowest Prices

Highest Quality