Mars-Tech
All products Accessories All Ballnose (45 HRC) Ballnose (55 HRC) Ballnose (60 HRC) Ballnose (65 HRC) Ballnose (Inserted) Ballnose - 45 HRC Ballnose - 55 HRC Ballnose - 55 HRC 1 Ballnose - 60 HRC Ballnose - 60 HRC 1 BBT40 Holders Boring Heads BPT BT-30 Type BT-40 BCA BT-40 Type Carbide Cutters Carbide Cutters CBN Inserts Ceratizit Chamfer Cutter Chamfering Collet Chucks Collet Chuks Collet ER Types Collets - ER Type Cutters High Feed Cylindrical Chuks Cylndrical Chuck Dasqua Deal of the Day Deskar Dijet Drill Chuck - Keyless Duracarb Edge Finders Endmill (45 HRC) Endmill (55 HRC) 1 Endmill (60 HRC) Endmill (Inserted) Endmill - 45 HRC Endmill - 55 HRC Endmill - 55 HRC 1 Endmill - 60 HRC Endmill - 60 HRC 1 Endmill Ballnose - Micro ER Collets ER Nuts ER Spanners ER Tap Collets Find the Edge Gauges Grooving Inserts Grooving Work Heads - Boring High Feed Hitachi Indexable Cutters Inserted Ballnose Inserted Cutters Inserted Endmill Inserts ISO40 Holders Jaibros JXD Keyless Drill Chuck Knob - Pull Studs Knob- Pull Studs Korloy Korloy Kyocera Life Locking Device Long Neck Cutters Mars-Tech Measurings Metrology Micro Endmill Ballnose Milling Inserts Milling Opertations Miscellaneous Mitsubishi Non-Ferrous Nuts - ER Nuts ER PCD Inserts Pull Studs Single Flute Endmill SK-40 Type Spanner - ER Spanners - ER Straight Shank Chucks Tabikut TaeguTec Threading Application Threading Inserts Tool Boy Tools Boy Torx Keys Torx Screws Turning Holders Turning Inserts Turning Usage U Drill Widia Yuzuki Z Setter ZCCCT Zero Pre Setter Zero Setter
Mars-Tech BT40 ER Collet Chuck BT40 ER32 UM-70L,100L,120L,150L,200L from ₹ 999.00
BT40 Tool Holder accepts all ER32 collets ER32 Collets range from 1 mm to 20 mm Thread inside internal stop screwMade from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundCoolant through capabilityGage length is 70mm,100MM,150MM,200MMRear thread for pull stud is M16 X 2.0 All holders have capability to become through coolant by simply removing screw in the center by allen key
Mars-Tech BT40 FMB FMC FMA Face Milling Holder Arbour FMA22 from ₹ 1,250.00
BT40 facemill holder also called facemill arbour and facemill adaptor  BT40 FMA22 Is mainly used to hold Modular Indexable Cutter with Internal hole of 16 mm any cutter can come with a 22 mm Internal thread but normally 50 mm AND 63 mm Cutters are common in this range.  Made from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundGage length is 50MM,100MM,150MM,200MM,250MM,300MMRear thread for pull stud is M16 X 2.0
Mars-Tech BT40 Side Lock Adaptor , SLA 16 SLA20 SLA25 LSA32 SLA 40 mm For Cylendrical Shank from ₹ 1,250.00
BT40 SLA holder also called SIDE LOCK HOLDER BT40 SIDE LOCK Is mainly used to hold Cylendrical/Straight Shank of anything like Indexable Cutter , Baby chuck , Carbide Drill whatever with straight shank can hold into for better rigidity and strength it range from 16 mm to 40 mm as small diameter of shank can be hold in standard collet chuck.  Made from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundGage length is 50MM,100MM,150MMRear thread for pull stud is M16 X 2.0
Mars-Tech BT40 ER COLLET CHUCK BT40 ER16A-70L,100L,150L,200L hex and M type nut from ₹ 1,250.00
BT40 Tool Holder accepts all ER16 collets ER16 Collets range from 1 mm to 12 mm Thread inside internal stop screwMade from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundCoolant through capabilityGage length is 70mm,100MM,150MM,200MM Rear thread for pull stud is M16 X 2.0 All holders have capability to become through coolant by simply removing screw in the center by allen key 
Mars-Tech BT40 ER Collet Chuck BT40 ER25UM-70L,100L,150L from ₹ 1,250.00
BT40 Tool Holder accepts all ER25 collets ER25 Collets range from 1 mm to 16 mm Thread inside internal stop screwMade from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundCoolant through capabilityGage length is 70mm,100MM,150MM,200MMRear thread for pull stud is M16 X 2.0 All holders have capability to become through coolant by simply removing screw in the center by allen key
Mars-Tech BT40 ER Collet Chuck BT40 ER40 UM-80L,100L,150L,200L from ₹ 1,250.00
BT40 Tool Holder accepts all ER40 collets ER40 Collets range from 3 mm to 26 mm Thread inside internal stop screwMade from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundCoolant through capabilityGage length is 70mm,100MM,150MM,200MMRear thread for pull stud is M16 X 2.0 All holders have capability to become through coolant by simply removing screw in the center by allen key
Mars-Tech BT40 Morse Taper Adaptor MT Holder MT1 MT2 MT3 MT4 from ₹ 1,250.00
BT40 Morse Taper holder are used to hold Tang type shanks  BT40 morse taper Is mainly used to hold Tang Type Drills and Arbours   Better shank taper - accurate, rigid toolholder-to-spindle mount Less tool wear and replacement - less scrap Fully ground flange and V-groove, easy on the tool changers for less spindle and changer maintenance Made from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundRear thread for pull stud is M16 X 2.0   This is general standard to choose morse taper size for drills (it may change with different din standard or special sizes)  MT 1 IS USED FOR SMALL DRILL UPTO 14MM MT 2 IS USED FOR 14.25 MM TO 23 MMMT 3 IS USED FOR 23.5 TO 31.5 MMMT4 IS USED FOR 32TO 49.5MM3
Mars-Tech BT40 ER Collet Chuck BT40 ER20A-70L,100L,150L from ₹ 1,250.00
BT40 Tool Holder accepts all ER20 collets ER20 Collets range from 1 mm to 14 mm Thread inside internal stop screwMade from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundCoolant through capabilityGage length is 70mm,100MM,150MM,200MMRear thread for pull stud is M16 X 2.0 All holders have capability to become through coolant by simply removing screw in the center by allen key 
Mars-Tech BT40 FMB FMC FMA Face Milling Holder Arbour FMA27 from ₹ 1,250.00
BT40 facemill holder also called facemill arbour and facemill adaptor  BT40 FMA27 Is mainly used to hold Modular Indexable Cutter with Internal hole of 16 mm any cutter can come with a 27 mm Internal thread but normally 80 mm AND 100 mm Cutters are common in this range.  Made from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundGage length is 50MM,100MM,150MM,200MM,250MM,300MMRear thread for pull stud is M16 X 2.0
Mars-Tech BT40 FMB FMC FMA Face Milling Holder Arbour FMA32 from ₹ 1,250.00
BT40 facemill holder also called facemill arbour and facemill adaptor  BT40 FMA32 Is mainly used to hold Modular Indexable Cutter with Internal hole of 16 mm any cutter can come with a 32 mm Internal thread but normally 100 mm AND 125 mm Cutters are common in this range.  Made from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundGage length is 50MM,100MM,150MMRear thread for pull stud is M16 X 2.0
Mars-Tech BT40 ER Collet Chuck BT40 ER11A-70L,100L,150L from ₹ 1,250.00
BT40 Tool Holder accepts all ER11 colletsThread inside internal stop screwMade from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micronAll critical tool holder surfaces precision groundCoolant through capabilityGage length is 70mm Rear thread for pull stud is M16 X 2.0 All holders have capability to become through coolant by simply removing screw in the center by allen key 
Mars-Tech BT40 FMB FMC FMA Face milling holder arbour FMA16 from ₹ 1,250.00
BT40 facemill holder also called facemill arbour and facemill adaptor  BT40 FMA16 Is mainly used to hold Modular Indexable Cutter with Internal hole of 16 mm any cutter can come with a 16 mm Internal thread but normally 40 mm Cutters are common in this range.  Made from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundGage length is 70mm,100MM,150MM,200MM,250MM,300MMRear thread for pull stud is M16 X 2.0  
Mars-Tech BT40 JT6 Adaptor Holder For JT6 arbour ₹ 1,250.00
BT40 JT6 holders are mainly used to hold JT6 Female Taper , This holder have JT6 Male taper if anything like drill chuck have internal taper of JT6 so it can hold it easily with rigidity.  Made from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundRear thread for pull stud is M16 X 2.0
Mars-Tech BT40 FMB FMC FMA Face Milling Holder Arbour FMA40 from ₹ 1,250.00
BT40 facemill holder also called facemill arbour and facemill adaptor  BT40 FMA40 Is mainly used to hold Modular Indexable Cutter with Internal hole of 16 mm any cutter can come with a 40 mm Internal thread but normally 160mm AND 200 mm Cutters are common in this range.  Made from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundGage length is 70MM,100MM,150MM,Rear thread for pull stud is M16 X 2.0
Sold out
Mars-Tech marstech Hydro Grip holder BT40 72.5L ID20MM pack of 1 ₹ 8,890.00
Hydrogrip balanced upto 25000 rpm  20 mm inside id which can fit 20 mm shank directly and for shorter shanks use reduction sleeve   

GST Input Credit

Get Business Invoice and get 100% GST Input Credit for your Order.

7-Day Return

If you dont like the Product, Return it within 7 Days and get 100% refund.

Lowest Prices

We are offering Products at Lowest Prices in the Industry*.

Highest Quality

We strive to provide best quality product .