Endmill (60 HRC)

Tabikut 4mm Carbide Endmill 60 HRC ... ₹ 480.00

UPTO 6 MM 50 mm Length price is for 2 Nos. you order 1 quantity you will get 2 pcs 480 rs. price is for 2 nos. 1 will cost 240 rs. only. Solid Carbide Cutter are used to machine Hard and tough Material , Steel , Alloy Steel , Cast iron , stainless steel and many other material grades. Bronze TiSiN Coating , Endmill for Better Life and wear resistance.35 Degree Helix Angel , Grain Size 0.5μmUsed for Face Mill , Shoulder mill , side mill etc ,Plastic Packaging for non breakable packing

Tabikut 10 mm Carbide Endmill 60 HR... from ₹ 1,300.00

10 mm Carbide Endmill 60 HRC 4 FlutesSolid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill etc , Plastic Packaging for non-breakable packing Size of Solid Carbide Cutter 60 HRC: 10 mm

8 mm Carbide Endmill 60 HRC 60/100 mm long 4 Flutes pack of 1

Tabikut 8 mm Carbide Endmill 60 HRC... from ₹ 825.00

Solid Carbide Cutter are used to machine Hard and tough Material , Steel , Alloy Steel , Cast iron , stainless steel and many other material grades. Bronze TiSiN Coating , Endmill for Better Life and wear resistance.35 Degree Helix Angel , Grain Size 0.5μmUsed for Face Mill , Shoulder mill , side mill etc ,Plastic Packaging for non breakable packing

Tabikut 3 Mm -3/4mm SHANK Carbide E... ₹ 440.00

UPTO 6 MM 50 mm Length price is for 2 Nos. you order 1 quantity you will get 2 pcs rs. 440 price is for 2 nos. 1 will cost rs. 220 only. Solid Carbide Cutter are used to machine Hard and tough Material , Steel , Alloy Steel , Cast iron , stainless steel and many other material grades. Bronze TiSiN Coating , Endmill for Better Life and wear resistance.35 Degree Helix Angel , Grain Size 0.5μmUsed for Face Mill , Shoulder mill , side mill etc ,Plastic Packaging for non breakable packing 55 HRC AND 60 HRC LOOKS SIMILAR BUT THERE IS DIFFRENCE IN QUALITY AND MATERIAL , 60 HRC CAN ALSO BE USED FOR STAINLESS STEEL

Tabikut 6 MM Carbide Endmill 60 HRC... from ₹ 690.00

UPTO 6 MM 50 mm Length price is for 2 Nos. you order 1 quantity you will get 2 pcs 990 rs. price is for 2 nos. 1 will cost 495 rs. only. Solid Carbide Cutter are used to machine Hard and tough Material , Steel , Alloy Steel , Cast iron , stainless steel and many other material grades. Bronze TiSiN Coating , Endmill for Better Life and wear resistance.35 Degree Helix Angel , Grain Size 0.5μmUsed for Face Mill , Shoulder mill , side mill etc ,Plastic Packaging for non breakable packing

Tabikut 12mm Carbide Endmill 60 HRC... from ₹ 1,700.00

Solid Carbide Cutter are used to machine Hard and tough Material , Steel , Alloy Steel , Cast iron , stainless steel and many other material grades. Bronze TiSiN Coating , Endmill for Better Life and wear resistance.35 Degree Helix Angel , Grain Size 0.5μmUsed for Face Mill , Shoulder mill , side mill etc ,Plastic Packaging for non breakable packing

Tabikut 2 Mm Carbide Endmill 60 HRC... ₹ 460.00

UPTO 6 MM 50 mm Length price is for 2 Nos. If you order 1 quantity you will get 2 pcs 460 rs. price is for 2 nos. 1 will cost 230 rs. only. Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc. Plastic Packaging for non-breakable packing 55 HRC AND 60 HRC LOOK SIMILAR BUT THERE IS A DIFFERENCE IN QUALITY AND MATERIAL, 60 HRC CAN ALSO BE USED FOR STAINLESS STEEL.

Tabikut 1 mm Carbide Endmill 60 HRC... ₹ 460.00

UPTO 6 MM 50 mm Length price is for 2 Nos. you order 1 quantity you will get 2 pcs 440 rs. price is for 2 nos. 1 will cost 220 rs. only. 1 mm Carbide Endmill 60 HRC 4 Flutes, PACK OF 2 Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for nonbreakable packing Size of Carbide Endmill 60 HRC: 1mm 55 HRC AND 60 HRC LOOK SIMILAR BUT THERE IS A DIFFERENCE IN QUALITY AND MATERIAL, 60 HRC CAN ALSO BE USED FOR STAINLESS STEEL.

Tabikut 1.5 Mm Carbide Endmill 60 H... ₹ 460.00

UPTO 6 MM 50 mm Length price is for 2 Nos. If you order 1 quantity you will get 2 pcs 460 rs. price is for 2 nos. 1 will cost 230 rs. only. 1.5 Mm Carbide Endmill 60 HRC 4 Flutes, PACK OF 2 Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for nonbreakable packing Size of Carbide Endmill 60 HRC: 1.5 mm 55 HRC AND 60 HRC LOOK SIMILAR BUT THERE IS A DIFFERENCE IN QUALITY AND MATERIAL, 60 HRC CAN ALSO BE USED FOR STAINLESS STEEL.

Tabikut 2.5 Mm Carbide Endmill 60 H... ₹ 440.00

UPTO 6 MM 50 mm Length price is for 2 Nos. If you order 1 quantity you will get 2 pcs 440 rs. price is for 2 nos. 1 will cost 220 rs. only. Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing 55 HRC AND 60 HRC LOOK SIMILAR BUT THERE IS A DIFFERENCE IN QUALITY AND MATERIAL, 60 HRC CAN ALSO BE USED FOR STAINLESS STEEL.

5mm 50/75 longCarbide Endmill 60 HRC 4 Flutes pack of 1

Tabikut 5mm 50/75 longCarbide Endmi... from ₹ 495.00

Solid Carbide Cutter are used to machine Hard and tough Material , Steel , Alloy Steel , Cast iron , stainless steel and many other material grades. Bronze TiSiN Coating , Endmill for Better Life and wear resistance.35 Degree Helix Angel , Grain Size 0.5μmUsed for Face Mill , Shoulder mill , side mill etc ,Plastic Packaging for non breakable packing Size of Solid Carbide Cutter 60 HRC: 5 mm

Find anything you need

Endmill (60 HRC)

GST Input Credit

7-Day Return

Lowest Prices

Highest Quality