Mars-Tech

Mars-Tech 10 mm 1 pocket Indexable In... from ₹ 519.00

,This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of APMT1135 into this

Mars-Tech 10.5 mm u drill suitable t... ₹ 2,000.00

10.5 MM U DRILL LXD-3 - 31.5 MM DRILLING CAPACITY U Drills can be used directly on surface without center hole , parameters mentioned on the leaf inside the box , small size u drill are not common and suitable insert is also small please read 2nd sheet to understand product usability

Sold out

Mars-Tech 100 Mm Bull Cutter For Die ... ₹ 2,750.00

EMRW-6R-100-32-6T suitable to R6 insert This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of RPMT1204/RDKW1204/R6 OF mostly brand into this , Recommended Suitable insert for this cutter is TABIKUT Carbide Insert

Mars-Tech 100 mm other edge apmt16 cu... ₹ 4,490.00

THIS IS OTHER EDGE CUTTER FOR APMT1604 Dia 100 cutter for APMT1604 insert , facemill cutter 100 mm apmt1604 Shank Holder FMB-32 This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use APMT1604 Of Tabikut Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

Mars-Tech 11 mm u drill suitable to S... ₹ 2,000.00

11 MM U DRILL LXD-3 - 33 MM DRILLING CAPACITY U Drills can be used directly on surface without center hole , parameters mentioned on the leaf inside the box , small size u drill are not common and suitable insert is also small please read 2nd sheet to understand product usability

Mars-Tech 11.5 mm u drill suitable t... ₹ 2,000.00

11.5 MM U DRILL LXD-3 - 34.5 MM DRILLING CAPACITY U Drills can be used directly on surface without center hole , parameters mentioned on the leaf inside the box , small size u drill are not common and suitable insert is also small please read 2nd sheet to understand product usability

Mars-Tech 12 mm Indexable Inserted En... from ₹ 550.00

This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of APMT1135 into this

Mars-Tech 12 mm u drill LD3 suitable ... ₹ 2,000.00

12 MM U DRILL LXD-3 - 36 MM DRILLING CAPACITY U Drills can be used directly on surface without center hole , parameters mentioned on the leaf inside the box , small size u drill are not common and suitable insert is also small please read 2nd sheet to understand product usability

Mars-Tech 12.5 mm u drill LD3 suitab... ₹ 2,000.00

12.5 MM U DRILL LXD-3 - 37.5 MM DRILLING CAPACITY U Drills can be used directly on the surface without a center hole, parameters mentioned on the leaf inside the box, small size u drill are not common and the suitable insert is also small please read 2nd sheet to understand product usability

Sold out

Mars-Tech 125 Mm Bull Cutter For Die ... ₹ 3,750.00

EMRW-6R-125-40-7T suitable to R6 insert 5 INCH FACING CUTTER This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of RPMT1204/RDKW1204/R6 OF mostly brand into this , Recommended Suitable insert for this cutter is TABIKUT Carbide Insert

Mars-Tech 14 mm Indexable Endmill Sui... ₹ 800.00

This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of APMT1135 into this

Mars-Tech 16 mm ballnose T2139 C16-8R... from ₹ 2,000.00

This is inserted ballnose suitable to only Walter brand insert with R8 radius please check your insert before buying. Insert are not included with order you need to buy it seprately. 150 and 200 Length please check in variation

Mars-Tech 16 mm ZCMT10 Insert cutter ... ₹ 1,200.00

SICL 1610S16-2N-150L SICL 2010S20-2N-200L SICL 2510S25-3N-200L This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides ,this cutter is suitable to ZCMT1003 from DIJET brand. If any other brand have same insert you can use for this cutter.

Mars-Tech 160 Mm Bull Cutter For Die ... ₹ 6,000.00

EMRW-6R-160-40-8T suitable to R6 insert 6 INCH cutter This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of RPMT1204/RDKW1204/R6 OF mostly brand into this , Recommended Suitable insert for this cutter is TABIKUT Carbide Insert

sale

Mars-Tech 16mm cutter 2 pocket Suitab... from ₹ 550.00 ₹ 3,000.00

This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of APMT1135 into this Different Lengths and Different Shank size please choose before adding to cart

Mars-Tech 16mm inseted ballnose for R... ₹ 1,000.00

EMRT-C16-4R16-200L THERE ARE 2 TYPES IF YOU NEED 0803 PLEASE CHECK THICKNESS OF INSERT 08T2 HAS THICKNESS OF 2.78 MM ( CHIP BREAKER SURFACE) 0803 HAS THICKNESS OF 3.18 MM ( PLAIN SURFACE) This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of RPMW08T2/RDKW08T2/0803/R4 OF mostly brand into this ,

18 mm marstech Indexable Inserted Endmill

Mars-Tech 18 mm Inserted Endmill Shan... from ₹ 896.00

This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of APMT1135 into this HAVE A DETAIL VIEW HERE https://www.youtube.com/watch?v=2wx3B5AEQI0 Different Lengths and Different Shank size please choose before adding to cart

Sold out

Mars-Tech 20 MM Bull Cutter Suitable ... from ₹ 800.00

EMRW-C20-4R20-150L EMRW-C20-4R20-200L This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of RPMW0802/RDKW0802/R4 OF mostly brand into this ,

Mars-Tech 20 MM bull cutter suitable ... ₹ 750.00

EMRW-C20-5R20-150L EMRW-C20-5R20-200L This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of RPMW1003/RDKW103/R5 OF mostly brand into this , please note this is not for RPMT10T3 , 10T3 Thickness is 3.87 mm and RPMW1003 thickness is 3.18 mm and 10T3 have design on it.

Mars-Tech 20 mm Indexable Inserted En... ₹ 1,200.00

This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use JDMT1003 from Hitachi Brand Insert into this , If any other brand have same insert it can also fixed to this.

Find anything you need

GST Input Credit

7-Day Return

Lowest Prices

Highest Quality