Buy High Feed Milling Tools Cutters & Mills Purchase Now – Page 2

Mars-Tech High Feed Cutter Dia 80 Mm ... ₹ 5,416.00

ASRF12-80-27-6T , ASRF12-63-22-4T This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use SDMT1205 Tabikut Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

Mars-Tech WNMU08 Cutter Dia 80 mm Pac... ₹ 6,608.00

80 mm 6 pocket M5 screw T20 torx key This cutter is suitable to any brand of WNMU08 -6 Pocket 90 Degree High Feed Cutter.

Sold out

Mars-Tech Helical rougher cutter for ... ₹ 10,231.00

This is Helical Cutter also called rougher cutter it has more pockets used for milling operation for roughing or plunging it saves time used in roughing operation also This is 25 mm cutter please read details before ordering BAP300R-C25-25-68M-200L-2T-16P Suitable Insert - APMT1135 Shank Diameter for holding - 25 mm Cutter Diameter- 25 mm cutting length Helical length - 68 mm Total Length - 200 mm Pocket - 16 inserts will fit in one time

Sold out

Mars-Tech WDMW06T320 High Feed Insert... ₹ 1,926.00

SKS-2025-200-S25 , SKS-4050R-08-22 ,SKS-2028-40E-S25,SKS-4063R-08-27,SKS-5080R-10-27 This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use WDMW06T320 DIJETBrand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

Mars-Tech WNMU08 Cutter Dia 100 mm Pa... ₹ 8,260.00

100 mm -7 pocket - M5 screw T20 torx key size. This cutter is suitable to any brand of WNMU08 -8 Pocket 90 Degree High Feed Cutter.

Mars-Tech WNMU08 Cutter Dia 125 mm Pa... ₹ 11,328.00

This cutter is suitable to any brand of WNMU08 -8 Pocket 90 Degree High Feed Cutter.

WDMW080520ZTR High Feed Insert Cutter Body 63 Mm

Mars-Tech WDMW080520ZTR High Feed Ins... ₹ 1,926.00

SKS-2025-200-S25 , SKS-4050R-08-22 ,SKS-2028-40E-S25,SKS-4063R-08-27,SKS-5080R-10-27 This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use WDMW080520 DIJETBrand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

Sold out

DIA 100 NNMU2006 & 2007 Face Mill Cutter For Pack OF 1

Mars-Tech DIA 100 NNMU2006 & 2007 Fac... ₹ 10,832.00

NNMU2006 AND 2007 Suitable Cutter 100 MM 6 Pocket High Quality.

Dia 63 NNMU2006 & 2007 Face Mill Cutter for Pack OF 1

Mars-Tech Dia 63 NNMU2006 & 2007 Face... ₹ 6,620.00

NNMU2006 AND 2007 Suitable Cutter 63 MM 4 Pocket High Quality.

Mars-Tech SKS06-50-22-5T CUTTER FOR W... ₹ 2,166.00

This cutter is suitable to WDMW06 High Feed Cutter , This is 50 mm suitable to WDMW06 Cutters , its has 5

Sold out

WDMW080520ZTR High Feed Insert Cutter Body 80 Mm

Mars-Tech WDMW080520ZTR High Feed Ins... ₹ 4,152.00

SKS-2025-200-S25 , SKS-4050R-08-22 ,SKS-2028-40E-S25,SKS-4063R-08-27,SKS-5080R-10-27 80MM WITH 5 POCKET AND FMB27 This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use WDMW080520 DIJETBrand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

32 mm Helical rougher cutter for apmt1604 insert pack of 1

Mars-Tech 32 mm Helical rougher cutte... ₹ 8,456.00

This is Helical Cutter also called rougher cutter it has more pockets used for milling operation for roughing or plunging it saves time used in roughing operation also This is 25 mm cutter please read details before ordering EAP400R-C32-32-55M-150-2T-8P Suitable Insert - APMT1604 Shank Diameter for holding - 32 mm Cutter Diameter- 32 mm cutting length Helical length - 55 mm Total Length - 150 mm Pocket - 8 inserts will fit in one time

Mars-Tech 32 mm sdmt1205 High feed cu... ₹ 2,400.00

32 mm sdmt1205 High feed cutter suitable to tabikut Deskar Gesac brandASRF12-32-200L-2T This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use SDMT1205 Tabikut Brand Insert into this If any other brand has same insert it can also be fixed to this. there are many Chinese brands also making the same inserts so you can just check descriptions of sizes from other brands to fix this insert.

ONMU0806 cutter 50/63/80/100/125/160 pack of 1

Mars-Tech ONMU0806 cutter 50/63/80/10... from ₹ 8,260.00

suitable insert KORLOY/ISCAR/YG1/ZCC ONMU080608 16 EDGE

Mars-Tech 100 mm SNMX1206 Insert Face... ₹ 13,841.00

SNMX1206 Facemill Cutter , indexable cutter body RM8 series 8 edges insert cutter body for dia 50 ,63 and 80 mm in 45 degree and 88 degree This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use SNMX1206 Of Korloy and Tabikut Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

Sold out