Buy Mars-Tech Tools and Solutions at Best Discount in India

Mars-Tech ER 32 COLLET DIN6499B AA 0.... from ₹ 313.00

The standard ER collet is the most widely used clamping system in the world.Made from Alloy spring steel and fully hardened these ER collets are ideal for many machining applications including boring, milling, reaming, tapping and grinding. Unless specified differently all of our ER collets feature runout of 0.010 micron or less. ,ER collet sizes start at ER8 through ER50. ER32 series collets have a capacity of 1mm-20mm. Each ER32 collet has a range of (1 mm). The size indicated on the collet is the largest size it can hold and can be collapsed smaller within its collapse range of (0.9mm). For example, ER32-6mm can grab a round shank from 6mm diameter to 5.1mm diameter.

sale

Mars-Tech 16mm cutter 2 pocket Suitab... from ₹ 662.00 ₹ 3,000.00

This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use any ISO inserts of APMT1135 into this. Different Lengths and Different Shank size please choose before adding to cart

Mars-Tech ER 16 COLLET DIN6499B AA 0.... from ₹ 241.00

The standard ER collet is the most widely used clamping system in the world.Made from Alloy spring steel and fully hardened these ER collets are ideal for many machining applications including boring, milling, reaming, tapping and grinding. Unless specified differently all of our ER collets feature runout of 0.010 micron or less. ,ER collet sizes start at ER8 through ER50. ER16 series collets have a capacity of 1mm-12mm. Each ER16 collet has a range of (1 mm). The size indicated on the collet is the largest size it can hold and can be collapsed smaller within its collapse range of (0.9mm). For example, ER16-3mm can grab a round shank from 3mm diameter to 2.1mm diameter.

Mars-Tech Torx Screw 2.5 mm T8 ( Pack... from ₹ 353.00

Hardened Star Torx Screw for Milling Cutters offered are screws that come with precision design and constructed standards ,These torx screw are hardened upto 50-55 hrc for wear resistance, These Torx screw are mainly used in indexable tools as Boring bar , Insert cutter , milling cutter ,They are precise screw for better grip of carbide insert with pocket 1 Packet Contains 100 Pcs , Choose Length

sale

Mars-Tech ER 25 COLLET DIN6499B AA 0.... from ₹ 253.00 ₹ 420.00

The standard ER collet is the most widely used clamping system in the world.Made from Alloy spring steel and fully hardened these ER collets are ideal for many machining applications including boring, milling, reaming, tapping and grinding. Unless specified differently all of our ER collets feature runout of 0.010 micron or less. ,ER collet sizes start at ER8 through ER50. ER25 series collets have a capacity of 1mm-16mm. Each ER25 collet has a range of (1 mm). The size indicated on the collet is the largest size it can hold and can be collapsed smaller within its collapse range of (0.9mm). For example, ER25-3mm can grab a round shank from 3mm diameter to 2.1mm diameter.

Mars-Tech Torx Screw 4 mm T15 ( Pack ... from ₹ 353.00

Hardened Star Torx Screw for Milling Cutters offered are screws that come with precision design and constructed standards ,These torx screw are hardened upto 50-55 hrc for wear resistance, These Torx screw are mainly used in indexable tools as Boring bar , Insert cutter , milling cutter ,They are precise screw for better grip of carbide insert with pocket 4 mm Screw comes in different lengths 8,9,10,12,14,16 Choose Length before adding to cart

Torx Screw High Precision 2.5 Mm 6mm Long T8

Torx Screw 2.5 Mm T8 High Precision ( Pack Of 10 Pcs )

Mars-Tech Torx Screw 2.5 Mm T8 High P... from ₹ 89.00

Hardened Star Torx Screw for Milling Cutters offered are screws that come with precision design and constructed standards ,These torx screw are hardened upto 50-55 hrc for wear resistance, These Torx screw are mainly used in indexable tools as Boring bar , Insert cutter , milling cutter ,They are precise screw for better grip of carbide insert with pocket

Mars-Tech Mechanical Edge Finder 10x4 mm ₹ 258.00

Mechanical Edge Finder also called touch point sensor are used for find Zero point of the workpiece and find center of the hole.

sale

Mars-Tech ER 20 COLLET DIN6499B AA 0.... from ₹ 247.00 ₹ 380.00

The standard ER collet is the most widely used clamping system in the world.Made from Alloy spring steel and fully hardened these ER collets are ideal for many machining applications including boring, milling, reaming, tapping and grinding. Unless specified differently all of our ER collets feature runout of 0.010 micron or less. ,ER collet sizes start at ER8 through ER50. ER20 series collets have a capacity of 1mm-14mm. Each ER20 collet has a range of (1 mm). The size indicated on the collet is the largest size it can hold and can be collapsed smaller within its collapse range of (0.9mm). For example, ER20-3mm can grab a round shank from 3mm diameter to 2.1mm diameter.

Mars-Tech 20 mm Indexable Inserted En... from ₹ 1,083.00

This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use any ISO inserts of APMT1135 into this Different Lengths and Different Shank sizes please choose before adding to the cart

Mars-Tech Torx Screw 3.5 mm T15 ( Pac... ₹ 353.00

Hardened Star Torx Screw for Milling Cutters offered are screws that come with precision design and constructed standards ,These torx screw are hardened upto 50-55 hrc for wear resistance, These Torx screw are mainly used in indexable tools as Boring bar , Insert cutter , milling cutter ,They are precise screw for better grip of carbide insert with pocket 3.5 MM screw in different length - 6,8,9,10,12 mm Choose Length before adding to cart

Mars-Tech ER 11 COLLET DIN6499B AA 0.... from ₹ 253.00

The standard ER collet is the most widely used clamping system in the world.Made from Alloy spring steel and fully hardened these ER collets are ideal for many machining applications including boring, milling, reaming, tapping and grinding. Unless specified differently all of our ER collets feature runout of 0.010 micron or less. ,ER collet sizes start at ER8 through ER50. ER11 series collets have a capacity of 1mm-7mm. Each ER11 collet has a range of (0.5mm). The size indicated on the collet is the largest size it can hold and can be collapsed smaller within its collapse range of (0.5mm). For example, ER11-3mm can grab a round shank from 3mm diameter to 2.5mm diameter.

Mars-Tech ER 40 COLLET DIN6499B AA 0.... ₹ 361.00

The standard ER collet is the most widely used clamping system in the world.Made from Alloy spring steel and fully hardened these ER collets are ideal for many machining applications including boring, milling, reaming, tapping and grinding. Unless specified differently all of our ER collets feature runout of 0.010 micron or less. ,ER collet sizes start at ER8 through ER50. ER40 series collets have a capacity of 3mm-26mm. Each ER32 collet has a range of (1 mm). The size indicated on the collet is the largest size it can hold and can be collapsed smaller within its collapse range of (0.9mm). For example, ER40-6mm can grab a round shank from 6mm diameter to 5.1mm diameter.

Torx Screw 4 MM T15 High Precision ( Pack Of 10 Pcs )

Mars-Tech Torx Screw 4 MM T15 High P... from ₹ 89.00

Hardened Star Torx Screw for Milling Cutters offered are screws that come with precision design and constructed standards ,These torx screw are hardened upto 50-55 hrc for wear resistance, These Torx screw are mainly used in indexable tools as Boring bar , Insert cutter , milling cutter ,They are precise screw for better grip of carbide insert with pocket

Mars-Tech BT40ER32 UM collet chuck-70... from ₹ 1,202.00

BT40 Tool Holder accepts all ER32 collets ER32 Collets range from 1 mm to 20 mm Thread inside internal stop screwMade from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundCoolant through capabilityGage length is 70mm,100MM,150MM,200MMRear thread for pull stud is M16 X 2.0 All holders have capability to become through coolant by simply removing screw in the center by allen key

10 mm 1 pocket Indexable Inserted Endmill Dia 10 Suitable to APMT1135

10 mm 1 pocket Indexable Inserted Endmill

Mars-Tech 10 mm 1 pocket Indexable In... from ₹ 635.00

This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use any ISO inserts of APMT1135 into this

25 mm Indexable Inserted Endmill shank 25 mm

Mars-Tech 25 mm Indexable Endmill Sha... from ₹ 1,264.00

25 mm Indexable Endmill Shank25 Mm 2 Pocket Suitable To APMT1604This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use any ISO inserts of APMT1604 into this Different Lengths and Different Shank sizes please choose before adding to the cart

Mars-Tech 12 mm Indexable Inserted En... from ₹ 662.00

This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of APMT1135 into this

Torx Screw 3.5 Mm T15 High Precision( Pack Of 10 Pcs )

Mars-Tech Torx Screw 3.5 Mm T15 High ... from ₹ 106.00

Hardened Star Torx Screw for Milling Cutters offered are screws that come with precision design and constructed standards ,These torx screw are hardened upto 50-55 hrc for wear resistance, These Torx screw are mainly used in indexable tools as Boring bar , Insert cutter , milling cutter ,They are precise screw for better grip of carbide insert with pocket

Mars-Tech Grey Torx Screw 2.5 Mm 6/7/... ₹ 471.00

Grey Torx Screw are also normal screw quality its just a grey coating Hardened Star Torx Screw for Milling Cutters offered are screws that come with precision design and constructed standards ,These torx screw are hardened upto 50-55 hrc for wear resistance, These Torx screw are mainly used in indexable tools as Boring bar , Insert cutter , milling cutter ,They are precise screw for better grip of carbide insert with pocket

Get Extra 1% Discount on Jaibros App only

Find anything you need

Mars-Tech

GST Input Credit

7-Day Return

Lowest Prices

Highest Quality