Mars-Tech

Mars-Tech BT30 FMB 22 mm Face Milling... ₹ 1,505.00

BT30 FMB 22 mm Face Milling Holder ArbourBT30 facemill holder also called facemill arbour and facemill adaptor BT30 FMA22 Is mainly used to hold Modular Indexable Cutter with Internal hole of 16 mm any cutter can come with a 22 mm Internal thread but normally 50 mm AND 63 mm Cutters are common in this range. Made from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundGage length is 45MM,90MMRear thread for pull stud is M12 X 1.75

Mars-Tech BT40 JT6 Adaptor Holder For... ₹ 1,505.00

BT40 JT6 holders are mainly used to hold JT6 Female Taper , This holder have JT6 Male taper if anything like drill chuck have internal taper of JT6 so it can hold it easily with rigidity. Made from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundRear thread for pull stud is M16 X 2.0

Mars-Tech BT40 fmb 40 mm Face millin... from ₹ 1,505.00

BT40 facemill holder also called facemill arbour and facemill adaptor BT40 FMA40 Is mainly used to hold Modular Indexable Cutter with Internal hole of 16 mm any cutter can come with a 40 mm Internal thread but normally 160mm AND 200 mm Cutters are common in this range. Made from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundGage length is 70MM,100MM,150MM,Rear thread for pull stud is M16 X 2.0

Sold out

APKT11T3 Indexable Milling Cutter For Dia 20

Mars-Tech APKT11T3 Indexable Milling ... ₹ 722.00

APKT11T3 Indexable Milling Cutter For Dia 20 In 19 Mm Shank Size 200 Length Suitable To ZCCCT Brand InsertsThis is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use APKT11T3 For ZCCCT Brand Insert into this , If any other brand have same insert can also fix to this cutter body Kindly Take Care its not for APMT1135 its only for APKT11T3

STFCL/R TCMT11 Boring Bar dia 10/12/16 pack of 1

Mars-Tech STFCL/R TCMT11 Boring Bar d... from ₹ 472.00

PLEASE CHECK 2ND IMAGE AND ANGEL BEFORE ORDERING. This boring bar comes in different angel which change the usage and application kindly check 2nd image of the product for technical details , spare details and angel degree

Sold out

Threading Boring bar 16 mm -16 MM ENTRY for 16IR threading insert pack of 1

Mars-Tech Threading Boring bar 16 mm ... ₹ 885.00

Right hand internal thread boring bar SNR0013M16 Entry Dia 16 mm Shank Dia 16 mm SCREW - 3.5x9 TORX KEY - T15 Length - 150MM

Mars-Tech WBMT06 10mm boring bar pac... from ₹ 826.00

WBGT060102 BORING BAR ENTRY DIA IS 6 MM OF THIS BAR SHANK IS 10 MM SUITABLE TO WBGT060102 INSERT OF ANY BRAND LENGTH OF THIS BORING BAR - 125 MM SUITABLE SCREW 2.2X6 TORX KEY - T6

Mars-Tech U Drill 40 mm from ₹ 4,720.00

Please choose LXD of drill size as it can change drilling capacity which is the most important part of drilling. All Size comes in 2D 3D 4D 5D and Suitable Inserts SPMG AND WCMX please check from the drop-down menu.

Mars-Tech BT30 Locking Device Tool Bo... ₹ 2,227.00

BT30 Locking Device Tool Boy , Bt30 Fixture Clamping Fixture Of Bt30BT30 Locking device with Vertical and Horizontal modes to tighten Nut and Pull studs made of Steel and long life. cone for taper is made of aluminium. 3.5 kgs of 1 pc.

50 Mm Bull Cutter For Die And Mould | RPMT10T3

Mars-Tech 50 -R5-10T3 Mm Bull Cutter ... ₹ 1,505.00

FOR TECHNICAL DETAILS GO TO SECOND IMAGE OF PRODUCT EMRT-5R-50-22-4T SUITABLE TO R5 RPMT10T3 This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of RPMT10T3/RPKT10T3/R5 OF mostly brand into this , please note this 10T3 Thickness is 3.87 mm and RPMW1003 thickness is 3.18 mm and 10T3 have design on it. also a picture to check both types.

Mars-Tech 50 mm SOMT12T3 Indexable Cu... ₹ 2,407.00

50 mm SOMT12T3 Indexable Cutter dia 50 mm suitable to Mitsubishi Insert pack of 1 SOMT12T3 ASX400-050-A04R DIA 50 CUTTER BODY SUITABLE FOR MITSUBISHI SOMT12T3 ASX400-063-A05R DIA 63 MILLING CUTTER INDEXABLE SOMT12T3 ASX400-080-A06R DIA 80 FACE MILLING CUTTER This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use SOMT12T3 Of Mitsubishi and Tabikut Brand Insert into this If any other brand has same insert it can also be fixed to this. there are many Chinese brands also making the same inserts so you can just check descriptions of size from other brands to fix this insert.

Mars-Tech 63 mm snmx SNMX1206 Insert ... ₹ 5,686.00

63 mm snmx SNMX1206 Insert Facemill In 45 Degree And 88 Degree Suitable To KORLOY Brand SNMX1206 Facemill Cutter, indexable cutter body RM8 series 8 edges insert cutter body for dia 50,63, and 80 mm in 45-degree and 88 degree This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides , you can use SNMX1206 Of Korloy and Tabikut Brand Insert into this If any other brand has same insert it can also be fixed to this. there are many Chinese brands also making the same inserts so you can just check descriptions of sizes from other brands to fix this insert.

Mars-Tech APKT11T3 Indexable Milling ... ₹ 798.00

APKT11T3 Indexable Milling Cutter For Dia 18 In 16 Mm Shank Suitable To ZCCCT Brand InsertsThis is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by center to center and they have center hole both sides, you can use APKT11T3 For ZCCCT Brand Insert into this, If any other brand have same insert can also fix to this cutter body Kindly Take Care it's not for APMT1135 it's only for APKT11T3

63mm Apmt1135 other edge 75 degree insert cutter pack of 1

Mars-Tech 63mm Apmt1135 other edge 75... ₹ 2,070.00

63 mm Apmt1135 other edge insert 75 degree 4 pocket Dia 63- 4 pocket cutter for APMT135 insert , facemill cutter 63 mm apmt1135 Shank Holder FMB-22 This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use APMT1135 Of Tabikut Brand Insert into this If any other brand has same insert it can also be fixed to this. there are many Chinese brands also making the same inserts so you can just check the description of the size from other brands to fix this insert.

MWLNL/R WNMG06 Boring Bar dia 16/20/25 pack of 1

Mars-Tech MWLNL/R WNMG06 Boring Bar d... from ₹ 826.00

ER16 Collet set 1 mm to 10 mm High Quality Precision Collet. Set of 10 nos.

Mars-Tech ER16 Collet set 1 mm to 10 ... ₹ 2,660.00

THIS SET HAS 10 COLLETS 1 MM TO 10 MM EACH 1 NOS. The standard ER collet is the most widely used clamping system in the world.Made from Alloy spring steel and fully hardened these ER collets are ideal for many machining applications including boring, milling, reaming, tapping and grinding. Unless specified differently all of our ER collets feature runout of 0.010 micron or less. ,ER collet sizes start at ER8 through ER50. ER32 series collets have a capacity of 1mm-20mm. Each ER32 collet has a range of (1 mm). The size indicated on the collet is the largest size it can hold and can be collapsed smaller within its collapse range of (0.9mm). For example, ER32-6mm can grab a round shank from 6mm diameter to 5.1mm diameter.

Chamfer Cutter 30 Degree 5-16mm 16 mm shank range pack of 1

Mars-Tech Chamfer Cutter 30 Degree 5-... ₹ 1,926.00

hamfer cutter for 30 degree suitable to TCMT11 insert 2nd Image for Technical Details. CHAMFER CUTTER AFM30-TC11-C16-Z1-DIA 5 TO 16 A chamfer mill, or a chamfer cutter useful for many purposes a drill slop , remove burrs from drill hole , 30 degree angel needed for any machining requirement.

Mars-Tech 50 mm Apmt1604 other edge i... ₹ 2,166.00

75 DEGREE APMT1604 other edge cutter 3 pockets.Dia 50- 3 pocket cutter for APMT1604 insert , facemill cutter 50 mm apmt1604 Shank Holder FMB-22 This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use APMT1604 Of Tabikut Brand Insert into this If any other brand has same insert it can also be fixed to this. there are many Chinese brands also making the same inserts so you can just check the description of the size from other brands to fix this insert.

28 mm Indexable Inserted Endmill Shank 25

Mars-Tech 28 mm Indexable Inserted En... ₹ 3,250.00

28 mm Indexable Inserted Endmill Shank 25 dia 28 Mm 2 pockets Suitable To APMT1604NOTE: Non-Standard Size This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by center to center and they have center hole both sides, you can use any ISO inserts of APMT1604 into this

Mars-Tech U Drill 23.5 mm from ₹ 2,773.00

Please choose LXD of drill size as it can change drilling capacity which is most important part of drilling. All Size comes in 2D 3D 4D 5D and Suitable Inserts SPMG AND WCMX please check from drop down menu .