Mars-Tech

SRDCN 2525 RC1204 insert holder for turining radius pack of 1

Mars-Tech SRDCN 2525 RC1204 insert ho... ₹ 1,033.00

SRDCN is a Screw clamp holders in 2525 shank SCREW SIZE 4X10 its neutral tool

Mars-Tech BT40 CBK 2- 85/115/145 Long... from ₹ 2,166.00

BT40 CBK 2- 85/115/145 Long pack of 1LBK also Called CBK is used for holding of SDJ EWN RBH kind of boring holders it has diffrent lengths to choose from variation balanced upto 12000 RPM

SDJ 20-28 mm boring head for finish boring range pack of 1

Mars-Tech SDJ 20-28 mm boring head f... ₹ 13,902.00

SDJ Boring head are finishing cum roughing heads and can work directy after u drill operation. kindly check details size for more details Suitable holding for this is LBK1

Mars-Tech ER25M SPANNER TYPE pack of 1 ₹ 361.00

ER25M Spanner for ER25 miniature type nut , tighten it and loosen it

Mars-Tech U Drill 39 MM from ₹ 4,602.00

Please choose LXD of drill size as it can change drilling capacity which is the most important part of drilling. All Size comes in 2D 3D 4D 5D and Suitable Inserts SPMG AND WCMX please check from the drop-down menu.

Mars-Tech U Drill 36mm from ₹ 4,248.00

Please choose LXD of drill size as it can change drilling capacity which is the most important part of drilling. All Size comes in 2D 3D 4D 5D and Suitable Inserts SPMG AND WCMX please check from the drop-down menu.

ER50 SPANNER UM TYPE And C TYPE For ER50 ER NUT Collet Chuck

Mars-Tech ER50 SPANNER UM TYPE And C ... ₹ 903.00

ER50 UM AND C TYPE Spanner Wrench is made from high quality alloy steel ,Thick material allows high torque without bending,4 point contact ensures no distortion of collet nut while tightening,ER50 Wrench works on all of our UM Type and UM type collet chucks that take ER50 collets

Mars-Tech 50 mm SNMX1206 cutter inser... ₹ 4,754.00

50 mm SNMX1206 cutter insert face mill in 45 degrees and 88 degrees suitable to KORLOY BrandSNMX1206 Facemill Cutter, indexable cutter body RM8 series 8 edges insert cutter body for dia 50,63, and 80 mm in 45-degree and 88 degree This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use SNMX1206 Of Korloy and Tabikut Brand Insert into this If any other brand has same insert it can also be fixed to this. there are many Chinese brands also making the same inserts so you can just check descriptions of sizes from other brands to fix this insert.

Indexable Inserted Endmill Dia 25 & 32 Mm

Mars-Tech Indexable Inserted Endmill ... from ₹ 2,227.00

XK01.09Z25.025.02 , XK01.09Z32.032.02 This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use SDMT09T3 From ZCCCT Brand Insert into this , If any other brand have same insert it can also fixed to this.

Mars-Tech Indexable Inserted Endmill ... from ₹ 1,866.00

R390-025A25-17M,R390-032A32-17M This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use R390-1704 For Sandvik Brand Insert into this , If any other brand have same insert it can also fixed to this.

10 MM Threading Boring bar 16MM SHANK for 11IR threading insert pack of 1

Mars-Tech 10 MM Threading Boring bar ... ₹ 826.00

Right hand internal thread boring bar SNR10M11-A16 SHANK SIZE IS 16 MM , REDUCE SHANK IS 10 MM SUITABLE INSERT IS 11 IR Entry Dia 12mm Shank Dia 16 mm SCREW - 2.5X6 TORX KEY - T8 Length - 150MM

SDQCL/R Boring bar suitable to Dcmt0702/Dcmt11t3 pack of 1

Mars-Tech SDQCL/R Boring bar suitable... from ₹ 472.00

PLEASE CHECK 2ND IMAGE AND ANGEL BEFORE ORDERING. This boring bar comes in different angel which change the usage and application kindly check 2nd image of the product for technical details , spare details and angel degree Dia 8,10,12 comes for DCMT070204 Dia 16,20,25,32 comes for DCMT11T304 Check Angle of boring bar also.

MDPNN -dnmg1506 neutral tool m type pack of 1

Mars-Tech MDPNN -dnmg1506 neutral too... ₹ 1,035.00

MDPNN is DNMG neutral tool DNMG1506

MTUNL/R TNMG1604 Boring Bar dia 16/20/25/32 pack of 1

Mars-Tech MTUNL/R TNMG1604 Boring Bar... from ₹ 826.00

PLEASE CHECK 2ND IMAGE AND ANGEL BEFORE ORDERING. This boring bar comes in different angel which change the usage and application kindly check 2nd image of the product for technical details , spare details and angel degree

MTQNL/R TNMG1604 Boring Bar dia 16/20/25/32 pack of 1

Mars-Tech MTQNL/R TNMG1604 Boring Bar... from ₹ 826.00

PLEASE CHECK 2ND IMAGE AND ANGEL BEFORE ORDERING. This boring bar comes in different angel which change the usage and application kindly check 2nd image of the product for technical details , spare details and angel degree

SDNCN - DCMT11T3 Turning Holder dcmt SDNCN pack of 1

Mars-Tech SDNCN - DCMT11T3 Turning Ho... ₹ 1,033.00

Turning holders comes in Right hand and left hand check the size also check Shank size 20 mm and 25 mm please choose this by looking at 2nd image for technical angel and spare parts for same. Turning Holder SDNCN 1616 M11 Suitable toDCMT11T3 Insert.

SCLCR/L -CCMT09T3 Turning Holder ccmt SCLCL/R pack of 1

Mars-Tech SCLCR/L -CCMT09T3 Turning H... ₹ 1,033.00

Turning holders comes in Right hand and left hand check the size also check Shank size 20 mm and 25 mm please choose this by looking at 2nd image for technical angel and spare parts for same. Turning Holder SCLCL/R 1616 M09 Suitable toCCMT09T3 Insert.