Mars-Tech

Mars-Tech 25 mm ZCMT10 Insert cutter ... ₹ 2,166.00

25 mm ZCMT10 Insert cutter 200 mm long pack of 1Note: 25 MM body has 3 Pockets. Product Description SICL 1610S16-2N-150L SICL 2010S20-2N-200L SICL 2510S25-3N-200L This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC not to wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by center to center and they have center hole both sides,this cutter is suitable to ZCMT1003 from DIJET brand. If any other brand have same insert you can use for this cutter.

Mars-Tech ISO 40 keyless drill chuck ... ₹ 1,914.00

This arbor is commonly used for holding JT6 male taper like used in KEYLESS DRILL CHUCK

Dia80 NNMU2006 & 2007 Face Mill Cutter For Pack of1

Mars-Tech Dia80 NNMU2006 & 2007 Face ... ₹ 8,666.00

NMU2006 AND 2007 Suitable Cutter 80 MM 5 Pocket High Quality.

Mars-Tech U Drill 38.5mm from ₹ 4,543.00

Please choose LXD of drill size as it can change drilling capacity which is the most important part of drilling. All Size comes in 2D 3D 4D 5D and Suitable Inserts SPMG AND WCMX please check from the drop-down menu.

Mars-Tech U Drill 37.5 mm from ₹ 4,425.00

Please choose LXD of drill size as it can change drilling capacity which is the most important part of drilling. All Size comes in 2D 3D 4D 5D and Suitable Inserts SPMG AND WCMX please check from the drop-down menu.

Mars-Tech U Drill 36.5 mm from ₹ 4,307.00

Please choose LXD of drill size as it can change drilling capacity which is the most important part of drilling. All Size comes in 2D 3D 4D 5D and Suitable Inserts SPMG AND WCMX please check from the drop-down menu.

Mars-Tech U Drill 35.5mm from ₹ 4,189.00

Please choose LXD of drill size as it can change drilling capacity which is the most important part of drilling. All Size comes in 2D 3D 4D 5D and Suitable Inserts SPMG AND WCMX please check from the drop-down menu.

Mars-Tech U Drill 21.5mm pack of 1 from ₹ 2,537.00

Please choose LXD of drill size as it can change drilling capacity which is most important part of drilling. All Size comes in 2D 3D 4D 5D and Suitable Inserts SPMG AND WCMX please check from drop down menu .

Sold out

Mars-Tech Tap Collet Er11 ₹ 782.00

Er Tap Collets Are Similar Like Er Collets and Can Fit Into Same Collet Chuck Used for Er Collets, but It Does Not Have Collapsibility and Every Collet Come for a Fixed Size.Every Tap Has a Square and Round So You Just Need to Check Square and Round Size of Tap and Er Chuck Size Than You Choose What Collet Will Fulfill Your Purpose Tapping collets will allow user to convert collet chucks used for many purposes into tapping chucks. ER Tapping Collets with Square Drive for synchronous tapping operations using any RD/ER collet chuck. Collet bore is exact tool diameter, with square drive, for accuracy and rigidity. Square in the ER Tap collet is offer tight grip for Tap which reduces slippage in Collets. Available sealed for coolant-through applications, as well as in DIN and JIS standard metric sizes.

Mars-Tech BT30 FMB 32 face milling Ho... ₹ 1,505.00

BT30 FMB 32 face milling Holder ArbourBT30 face mill holder also called face mill arbour and face mill adaptor BT30 FMA32 Is mainly used to hold Modular Indexable Cutter with an Internal hole of 16 mm any cutter can come with a 32 mm Internal thread but normally 100 mm AND 125 mm Cutters are common in this range. Made from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundGage length is 60MMRear thread for pull stud is M12X1.75

Sold out

Mars-Tech HSK63 Tool holder fixuture ... ₹ 4,213.00

HSK63 locking device is made of Ductile cast iron and light in weight

Sold out

Mars-Tech ER Nut ER50UM Type Nut pack of 1

Mars-Tech Mars-Tech ER Nut ER50UM Typ... ₹ 1,143.00

Holds all ER50 collets from 6 mm to 36 mmMade from alloy steel hardened to 54 – 56rcPrecision ground ID thread and taperHas an id thread of – M64*2.0POutside diameter is 78 MMSUITABLE SPANNER IS ER50UM AND ER50 C TYPE key to tighteninginternal cam removes collet when unscrewedMARSTECH CODE IS ER50UM TYPE NUT

XOMX1204 Inserted Endmill Cutter Dia 25 and 32 mm

Mars-Tech XOMX1204 Inserted Endmill C... from ₹ 1,745.00

R217.79-2525.0-XO12-2AN,R217.79-3232.0-XO12-3AN This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use XOMX1204 For SECO Brand Insert into this , If any other brand have same insert it can also fixed to this.

Get Extra 1% Discount on Jaibros App only

Find anything you need

GST Input Credit

7-Day Return

Lowest Prices

Highest Quality