All products
Accessories
All
Ballnose (45 HRC)
Ballnose (55 HRC)
Ballnose (60 HRC)
Ballnose (65 HRC)
Ballnose (Inserted)
Ballnose - 45 HRC
Ballnose - 55 HRC
Ballnose - 55 HRC 1
Ballnose - 60 HRC
Ballnose - 60 HRC 1
BBT40 Holders
Boring Heads
BPT
BT-30 Type
BT-40 BCA
BT-40 Type
Carbide Cutters
Carbide Cutters
Carbide Drills
CBN Inserts
Ceratizit
Chamfer Cutter
Chamfering
Collet Chucks
Collet Chuks
Collet ER Types
Collets - ER Type
Corner Radius Endmill
Cutters High Feed
Cylindrical Chuks
Cylndrical Chuck
Dasqua
Deal of the Day
Deskar
Dijet
Drill Chuck - Keyless
Duracarb
Edge Finders
Endmill (45 HRC)
Endmill (55 HRC) 1
Endmill (60 HRC)
Endmill (Inserted)
Endmill - 45 HRC
Endmill - 55 HRC
Endmill - 55 HRC 1
Endmill - 60 HRC
Endmill - 60 HRC 1
Endmill Ballnose - Micro
ER Collets
ER Nuts
ER Spanners
ER Tap Collets
Find the Edge
Gauges
Grooving Inserts
Grooving Work
Heads - Boring
High Feed
Hitachi
Indexable Cutters
Inserted Ballnose
Inserted Cutters
Inserted Endmill
Inserts
ISO40 Holders
Jaibros
JXD
Keyless Drill Chuck
Knob - Pull Studs
Knob- Pull Studs
Korloy
Korloy
Kyocera
Life
Locking Device
Long Neck Cutters
Mars-Tech
Measurings
Metrology
Micro Endmill Ballnose
Milling Inserts
Milling Opertations
Miscellaneous
Mitsubishi
Non Standard Endmills
Non-Ferrous
Nuts - ER
Nuts ER
PCD Inserts
Pull Studs
Rougher Endmills
Single Flute Endmill
SK-40 Type
Spanner - ER
Spanners - ER
Straight Shank Chucks
Tabikut
Tabikut Inserts
TaeguTec
Threading Application
Threading Inserts
Tool Boy
Tools Boy
Torx Keys
Torx Screws
Turning Holders
Turning Inserts
Turning Usage
U Drill
Widia
Yuzuki
Z Setter
ZCCCT
Zero Pre Setter
Zero Setter
Mars-Tech
C Type Boring Head Shanks d...
from ₹ 1,000.00
BORING HEAD SHANKS USED FOR 50 MM BORING HEAD
PLEASE CHECK WHAT IS TAPER OF YOUR MACHINE BEFORE CHOOSING SHANK
Mars-Tech
ABT40 side lock holder 16/2...
₹ 2,599.00
ABT40 Holder Taper and Both Face Are in Contact With Spindle Due to Which Spindle and Holder Act as Single Unit This Allows a Higher "Radial Rigidity" Hence We Get Good Surface Finish and Dimensional Accuracy While Machining Also Low Vibration at Higher Speed Which Increases Tool Life
So These Are Better Than General Bbt40 Holders but It Should Only Be Used With ABT40 Calibarated Spindle Only.
Collet Chuck Holder Is Balanced to G6.3-15000 Rpm
Mars-Tech
ABT40 ER32um collet chuck 7...
from ₹ 2,599.00
ABT40 Holder Taper and Both Face Are in Contact With Spindle Due to Which Spindle and Holder Act as Single Unit This Allows a Higher "Radial Rigidity" Hence We Get Good Surface Finish and Dimensional Accuracy While Machining Also Low Vibration at Higher Speed Which Increases Tool Life
So These Are Better Than General Bbt40 Holders but It Should Only Be Used With ABT40 Calibarated Spindle Only.
Collet Chuck Holder Is Balanced to G6.3-15000 Rpm
Mars-Tech
ABT40 fmb 22 50/100/150/200...
from ₹ 2,399.00
ABT40 Holder Taper and Both Face Are in Contact With Spindle Due to Which Spindle and Holder Act as Single Unit This Allows a Higher "Radial Rigidity" Hence We Get Good Surface Finish and Dimensional Accuracy While Machining Also Low Vibration at Higher Speed Which Increases Tool Life
So These Are Better Than General Bbt40 Holders but It Should Only Be Used With ABT40 Calibarated Spindle Only.
Collet Chuck Holder Is Balanced to G6.3-15000 Rpm
Mars-Tech
C Type Boring Head 100mm
₹ 8,600.00
C-type Boring head with 25 mm Boring Tool
Graduation 1 Div. = .01 mm
Boring Hole 25 mm
Offset - 40mm
Boring Capacity - 25 mm to 250 mm
Back Thread - 1.5" x 18 TPI
Can be used with different Shanks R8,MT2,MT3,ISO30,ISO40,BT40,BT50,ETC.
You can use indexable boring bar with 25 mm shank to start minimum diameter of boring. Length of the boring should be LD3 if boring bar is 25 mm depth of boring should limit to 75 mm in order to escape chattering.
Mars-Tech
C Type Boring Head 75 MM
₹ 6,800.00
C-type Boring head with 20 mm Boring Tool
Graduation 1 Div. = .01 mm
Boring Hole 20 mm
Offset - 25mm
Boring Capacity - 20 mm to 200 mm
Back Thread - 1.5" x 18 TPI
Can be used with different Shanks R8,MT2,MT3,ISO30,ISO40,BT40,BT50,ETC.
You can use indexable boring bar with 20 mm shank to start minimum diameter of boring. Length of the boring should be LD3 if boring bar is 20 mm depth of boring should limit to 60 mm in order to escape chattering.