2 flute carbide cutter
Ballnose 4 Flute
Carbide Ballnose 45 HRC
Carbide Ballnose 55 HRC
Carbide Ballnose 60 HRC
Carbide Ballnose 65 HRC
Carbide Drilling Inserts
Carbide Endmill 45 HRC
CARBIDE ENDMILL 55 HRC
Carbide Endmill 60 HRC
CARBIDE ENDMILL 65 HRC
Carbide Grooving Insert
CARBIDE INSERT
Carbide Micro Endmill Ballnose
Carbide Milling Inserts
Carbide PCD insert
Carbide Single Flute Cutters
Carbide Threading insert
Carbide Turning Insert
CBN Insert
Cermet Turning Inserts
Chamfer Cutter Insert
Corner Radius Endmill
DEAL
DLC 3 Flute Cutter
Multifunction Drill
Rib Cutter
Roughing Cutter
Taper Ballnose
Uncoated End & Ball
WOOD CUTTER
All products
Accessories
Accessories APP
Accessories APP 2
All
Ballnose (45 HRC)
Ballnose (55 HRC)
Ballnose (60 HRC)
Ballnose (65 HRC)
Ballnose (65 HRC)
Ballnose (Inserted)
Ballnose - 45 HRC
Ballnose - 55 HRC
Ballnose - 55 HRC 1
Ballnose - 60 HRC
Ballnose - 60 HRC 1
Ballnose 4 Flute (55HRC)
BBT40 Holders
Boring Heads
BPT
BT-30 Type
BT-40 BCA
BT-40 Type
Carbide Cutters
Carbide Cutters
Carbide Drills
CARBIDE15
CBN Inserts
Ceramic
Ceratizit
Cermet
Chamfer Cutter
Chamfering
Collet Chucks
Collet Chuks
Collet ER Types
Collets - ER Type
Corner Radius Endmill
Cutters High Feed
Cylindrical Chuks
Cylndrical Chuck
Dasqua
Deal of the Day
Deskar
Dijet
Drill Chuck - Keyless
Drilling Insert
Duracarb
Edge Finders
Endmill (3 Flute) DLC
Endmill (45 HRC)
Endmill (55 HRC) 1
Endmill (60 HRC)
Endmill (65 HRC)
Endmill (Inserted)
Endmill - 45 HRC
Endmill - 55 HRC
Endmill - 55 HRC 1
Endmill - 60 HRC
Endmill - 60 HRC 1
Endmill 2 Flute
Endmill Ballnose - Micro
ER Collets
ER Nuts
ER Spanners
ER Tap Collets
Find the Edge
Gauges
Grooving Inserts
Grooving Work
Heads - Boring
High Feed
Hitachi
Indexable Cutters
Inserted Ballnose
Inserted Cutters
Inserted Endmill
Inserts
INSERTS15
ISO40 Holders
Jaibros
JXD
Keyless Drill Chuck
Knob - Pull Studs
Knob- Pull Studs
Korloy
Korloy
Kyocera
Life
Locking Device
Long Neck Cutters
Mars-Tech
Measurings
Metrology
Micro Endmill Ballnose
Milling Inserts
Milling Opertations
Miscellaneous
Mitsubishi
Multifunction Tools
Non Standard Endmills
Non-Ferrous
Nuts - ER
Nuts ER
PCD Inserts
Promo Inserts
Pull Studs
Rougher Endmills
Single Flute Endmill
SK-40 Type
Spanner - ER
Spanners - ER
Straight Shank Chucks
Tabikut
Tabikut Inserts
TaeguTec
Threading Application
Threading Inserts
Tool Boy
Tools Boy
Torx Keys
Torx Screws
TURNING
Turning Holders
Turning Inserts
Turning Usage
U Drill
Uncoated End & Ball
volume discount
Wholesale Deals
Widia
Yuzuki
Z Setter
ZCCCT
Zero Pre Setter
Zero Setter
Tabikut
TABIKUT APMT1604 T20 Carbid...
₹ 1,239.00
WE SELL ORIGINAL INSERTS ONLY
APMT1604 T20 grade
T20 Grade is for general soft machining and
Carbide insert for Steel and Stainless Steel machining with or without coolant , used in any suitable cutter for BAP400R and this is used in milling machine mainly. Suitable cutter any cutter which suits APMT1604 insert.For steel , mild steel , hrc upto 45-55 with and without coolantAPMT1604 for BAP400R cutters brown coatedSUITABLE TO ALL MILLING CUTTER FOR APMT1604
Tabikut
SPMG060204 TB40G Carbide Dr...
₹ 1,652.00
This is multi-grade used for all kinds of material.
SPMG060204 suitable to 15.5MM, 16MM, 16.5MM, 17MM, 17.5MM, 18MM, 18.5MM, 19MM, 19.5MM, 20MM, 20.5MM, 21MM, 21.5MM u drills LD 2, 3, 4, 5
Cutting speed Vc 150-220 m/min, feed 0.05-0.12, This is for the general purpose you need to make hit and trial suitable to your material.
Tabikut
SPMG07T308 TB40G Carbide Dr...
₹ 1,711.00
SPMG07T308 U drill mostly range from 22mm,22.5MM,23MM,23.5MM,24MM,24.5MM,25MM,25.5MM,26MM,26.5MM,27MM, 27.5mm
Cutting speed Vc 150-220 m/min , feed 0.05-0.12 this is general recommendation you need to do some trial to find out best suitable parameters.
This is multi grade used on mostly all material , 1 box contain 10 inserts.
Tabikut
TABIKUT Carbide Insert APMT...
₹ 1,003.00
WE SELL ORIGINAL INSERTS ONLY
APMT1135 xmTABIKUT T20
Carbide insert for Steel and Stainless Steel machining with or without coolant , used in any suitable cutter for BAP300R and this is used in milling machine mainly. Suitable cutter any cutter which suits APMT1135 insert.For steel , mild steel , hrc upto 45 with coolant.APMT1135 for BAP300R cutters brown coatedSUITABLE TO ALL MILLING CUTTER FOR APMT1135
Tabikut
TABIKUT R6 Carbide Insert R...
₹ 1,003.00
Carbide insert for Steel and Stainless Steel machining with or without coolant , used in any suitable cutter for EMRW6R and this is used in milling machine mainly. Suitable cutter any cutter which suits RPMT1204 insert.For steel , mild steel , hrc upto 45-55 with and without coolantR6 for EMRW6R-CUTTER BODYcoatedSUITABLE TO ALL MILLING CUTTER FOR R61204
Tabikut
TCMT16T304/08 t20 Tabikut i...
₹ 1,345.00
TCMT16T304/08 CARBIDE INSERTS.
1 Box Contain 10 inserts.
Multi Grade used for all type of machining.
Tabikut
3 mm Carbide Endmill 45 HRC...
₹ 260.00
3 mm Carbide Endmill 45 HRC PACK OF 2Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Wine Coating TiALin Coating, Endmill for Better Life and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill etc, Plastic Packaging for non breakable
Tabikut
8 mm Carbide Endmill 60 HRC...
from ₹ 974.00
8 mm Carbide Endmill 60 HRC 60/100 mm long 4 Flutes pack of 1Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill etc, Plastic Packaging for non-breakable packing
Tabikut
TNMG160408/12 cq125 For Ste...
from ₹ 1,322.00
This Turning insert is for steel and stainless steel and its performance is amazing for finishing and roughing both purpose just try once and beat your current insert performance
Tabikut
4mm Carbide Endmill 60 HRC ...
from ₹ 442.00
4mm Carbide Endmill 60 HRC 4 Flutes, 50 MM LENGTH PACK OF 275 MM Length is pack of 1
Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill etc,Plastic Packaging for non-breakable packing
Tabikut
2 Mm Carbide Ballnose 55 HR...
₹ 434.00
Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel , Cast iron , stainless steel and many other material grades.
Bronze TiSiN Coating , Endmill for Better Life and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc. plastic Packaging for non-breakable packing
The flute Length of the Ballnose is double of diameter if the diameter is 1 mm flute length will be 2 mm same for other sizes if the total length increase flute length remains the same as the double diameter.
Tabikut
4 mm Carbide Endmill 45 HRC...
₹ 260.00
4 mm Carbide Endmill 45 HRC PACK OF 2Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Wine Coating TiALin Coating, Endmill for Better Life and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill etc, Plastic Packaging for non breakable
Tabikut
VNMG160404/08 TM 4509 pack ...
₹ 1,593.00
VNMG160408 CQ 4509 Carbide Insert with 0.8 mm Radius used on Steel , Mild Steel
General Parameters are mentioned on box
1 Box contain 10 inserts.
This is Steel Grade not cast iron
Tabikut
10 mm Carbide Endmill 60 HR...
from ₹ 1,534.00
10 mm Carbide Endmill 60 HRC 4 FlutesSolid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill etc, Plastic Packaging for non-breakable packing
Size of Solid Carbide Cutter 60 HRC: 10 mm
Tabikut
10 Mm Carbide Ballnose 55 H...
from ₹ 1,062.00
10 Mm Carbide Ballnose 55 HRC 2 Flutes, Shank 10 MM Flute Length 20 Mm Total Length Is 75/100/150/200 MmSolid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing
The flute Length of the Ballnose is double of diameter if the diameter is 1 mm flute length will be 2 mm same for other sizes if the total length increase flute length remains the same as the double diameter.
Tabikut
1 mm Carbide Ballnose 55 Hr...
₹ 434.00
1 mm Carbide Ballnose 55 Hrc Pack Of 2Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, Plastic Packaging for non-breakable packing
Size of Carbide Ballnose 55 Hrc: 1mm
The flute Length of the Ballnose is double of diameter if the diameter is 1 mm flute length will be 2 mm same for other sizes if the total length increase flute length remains the same double diameter.
Tabikut
SDMT120512 PH T20 High Feed...
₹ 1,475.00
SDMT120512 insert is high feed insert for milling machine suitable for steel and stainless steel.
corner radius is 1.2 mm
1 box contain 10 nos.
Carbide insert
Tabikut
3 Mm -3/4mm SHANK Carbide E...
from ₹ 442.00
3 Mm -3/4mm SHANK Carbide Endmill 60 HRC 4 Flutes , PACK OF 2
75 MM long is Pack of 1Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill etc, Plastic Packaging for non-breakable packing
55 HRC AND 60 HRC LOOK SIMILAR BUT THERE IS DIFFRENCE IN QUALITY AND MATERIAL, 60 HRC CAN ALSO BE USED FOR STAINLESS STEEL
Tabikut
2.5 mm Carbide Endmill 55 H...
₹ 342.00
Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing
Tabikut
6 MM Carbide Endmill 60 HRC...
from ₹ 814.00
6 MM Carbide Endmill 60 HRC 50/75 mm long 4 FlutesUPTO 6 MM 50 mm Length price is for 2 Nos. If you order 1 quantity you will get 2 pcs 990 rs. price is for 2 nos. 1 will cost 495 rs. only.
Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill etc , Plastic Packaging for non-breakable packing