Tabikut

Tabikut 1.5 Mm Carbide Endmill 60 H... ₹ 543.00

1.5 Mm Carbide Endmill 60 HRC 4 Flutes , PACK OF 2UPTO 6 MM 50 mm Length price is for 2 Nos. If you order 1 quantity you will get 2 pcs 460 rs. price is for 2 nos. 1 will cost 230 rs. only. 1.5 Mm Carbide Endmill 60 HRC 4 Flutes, PACK OF 2 Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for nonbreakable packing Size of Carbide Endmill 60 HRC: 1.5 mm 55 HRC AND 60 HRC LOOK SIMILAR BUT THERE IS A DIFFERENCE IN QUALITY AND MATERIAL, 60 HRC CAN ALSO BE USED FOR STAINLESS STEEL.

Tabikut 10mm 3 flute endmill 75/100... from ₹ 1,257.00

10mm 3 flute endmill 75/100 mm long DLC coated pack of 13 Flute Carbide Endmills are used for non-ferrous materials and soft materials like aluminum, brass, copper, silver, and gold. A DLC-coated endmill is for longer life on aluminum or sticky material machining. The advantage of DLC coating is it reduces friction and makes the chip evacuation more smooth and better surface quality The large core diameter is more stable A negative rake angle design enhances the rigidity of the tool TF25 carbide rod for soft material.

Tabikut 8mm 3 flute endmill 60/100 ... from ₹ 836.00

8mm 3 flute endmill 60/100 mm long DLC coated pack of 13 Flute Carbide Endmills are used for non-ferrous materials and soft materials like aluminum, brass, copper, silver, and gold. These DLC-coated endmills are for longer life on aluminum or sticky material machining. The advantage of DLC coating is it reduces friction and makes the chip evacuation more smooth and better surface quality The large core diameter is more stable A negative rake angle design enhances the rigidity of the tool TF25 carbide rod for soft material.

Tabikut 12mm Rougher cutter in 75&1... from ₹ 1,978.00

12mm Rougher cutter in 75&100 mm length pack of 1Rougher cutter are used for roughing cut on component and they are also preferred to use inside holes there you need chip evacuation better and doing a finish cut later. These are true 55 HRC cutter used on steel and stainless steel material can also work on cast iron and aluminium.

Tabikut 12 mm 3 flute endmill 75/10... from ₹ 1,739.00

12 mm 3 flute endmill 75/100 mm long DLC coated pack of 13 Flute Carbide Endmills are used for non-ferrous materials and soft materials like aluminum, brass, copper, silver & gold. These DLC-coated endmills are for longer life on aluminum or sticky material machining. The advantage of DLC coating is it reduces friction and makes the chip evacuation more smooth and better surface quality The large core diameter is more stable A negative rake angle design enhances the rigidity of the tool TF25 carbide rod for soft material.

Tabikut 3mm 3 flute endmill DLC coa... ₹ 325.00

3mm 3 flute endmill DLC coated pack of 13 Flute Carbide Endmills are used for non-ferrous materials and soft materials like aluminum, brass, copper, silver, and gold. These DLC-coated endmills are for longer life on aluminum or sticky material machining. Advantage of DLC coating is it reduces the friction and make the chip evacuation more smooth and better surface quality The large core diameter is more stable Negative rake angel design enhance rigidity of the tool TF25 carbide rod for soft material.

Tabikut SDMT1205 tf309 High Feed insert pack of 10

Tabikut Tabikut SDMT1205 tf309 High... ₹ 1,770.00

SDMT1205 TF309 Grade is for longer life and better life. it works same as T20 Grade but due to DLC coating it lasts longer. insert is high feed insert for milling machine suitable for steel and stainless steel. 1 box contain 10 nos. Carbide insert

-12% sale

Tabikut APMT1135 T15 Get 1 16mm Cutter Body Free -Pack Of 100

Tabikut Tabikut APMT1135 T15 Get 1... ₹ 7,850.00 ₹ 8,850.00

Tabikut Regular Price If you buy 100 Nis. We Give you 1 Cutter Body Of 16 MM 150 Long Fre with This.. This is special deal only 5 deals are available.

Tabikut Carbide Insert APGT1604 Tab... ₹ 1,711.00

APGT160408 -0.8 MM RADIUS INSERT for Aluminium Brass and Soft material its replaceable to APMT1604 insert so you can use same cutter for this also Do not use on steel , stainless steel , cast iron or hard material

Tabikut 5mm 50/75 long Carbide Endm... from ₹ 584.00

5mm 50/75 long Carbide Endmill 60 HRC 4 Flutes pack of 1Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing Size of Solid Carbide Cutter 60 HRC: 5 mm

2 mm Carbide Ballnose 2FLUTES/ 45 HRC PACK OF 2

Tabikut 2 mm Carbide Ballnose 2FLUT... ₹ 293.00

BALLNOSE ARE 2 FLUTES ONLY. Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Wine Coating TiALin Coating, Endmill for Better Life and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, Plastic Packaging for non-breakable. Pack of 1 means Qty. 1 Pack of 2 means price is for 2 nos.

Tabikut 2.5 mm Carbide Endmill 45 H... ₹ 260.00

Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Wine Coating TiALin Coating, Endmill for Better Life and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing

Tabikut Micro Endmill 0.3 Mm 4mm Sh... ₹ 525.00

Micro Endmill 0.3 mm with 2 Flutes and 4 mm Shank 0.6 mm Flute Length

Sold out

Tabikut 4mm 3 flute endmill DLC coa... ₹ 325.00

4mm 3 flute endmill DLC coated pack of 13 Flute Carbide Endmills are used for non ferrous material and soft material like aluminum , brass , copper , silver and gold. This DLC coated endmills are for longer life on aluminum or sticky material machining. Advantage of DLC coating is it reduce the friction and make the chip evacuation more smooth and better surface quality The large core diameter is more stable Negative rake angel design enhance rigidity of the tool TF25 carbide rod for soft material.

Tabikut 8 mm Rougher cutter in 60&1... from ₹ 912.00

8 mm Rougher cutter in 60 & 100 mm length pack of 1Rougher cutters are used for roughing cuts on components and they are also preferred to use inside holes there you need chip evacuation better and doing a finish cut later. These are true 55 HRC cutters used on steel and stainless steel material can also work on cast iron and aluminum.

Rib Cutter ballnose 2 mm- 2 flute 55 hrc pack of 1

Tabikut Rib Cutter ballnose 2 mm- 2... from ₹ 578.00

Rib cutter also called Long Neck ballnose Cutters are used for deep work of machining these comes with diffrent lengths like 8 mm , 10mm , 12 mm , 14mm , 16mm , 20 mm please select the length before ordering

Sold out

4 mm Carbide Ballnose 2 FLUTES | Side mill

Tabikut 4 mm Carbide Ballnose 2FLUT... ₹ 293.00

4 mm Carbide Ballnose 2FLUTES/ 45 HRC PACK OF 2BALLNOSE ARE 2 FLUTES ONLY. Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Wine Coating TiALin Coating, Endmill for Better Life and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder Mill, side mill, etc, Plastic Packaging for non breakable. Pack of 1 means Qty. 1 Pack of 2 means price is for 2 nos.

Tabikut 1 mm Carbide Ballnose 60 Hr... ₹ 531.00

UPTO 6 MM 50 mm Length price is for 2 Nos. If you order 1 quantity you will get 2 pcs 460 rs. price is for 2 nos. 1 will cost 230 rs. only. Ballnose are 2 flutes and Endmills are 4 flutes 1 mm Carbide Ballnose 60 Hrc Pack Of 2 Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing Size of Carbide Ballnose 60 Hrc: 1mm 55 HRC AND 60 HRC LOOK SIMILAR BUT THERE IS DIFFERENCE IN QUALITY AND MATERIAL, 60 HRC CAN ALSO BE USED FOR STAINLESS STEEL

WNMG080408 CQ 4609 Chipbreaker Insert Steel Grade Of Tabikut Pack Of 10

Tabikut WNMG080408 CQ 4609 Chipbrea... ₹ 1,416.00

WNMG080408 CQ4609 Carbide Insert with 0.8 mm Radius used on Steel , Mild Steel General Parameters are mentioned on box 1 Box contain 10 inserts. This is Steel Grade not cast iron

Tabikut 6 mm Rougher cutter in 50&7... from ₹ 550.00

6 mm Rougher cutter in 50 & 75 mm length pack of 1Rougher cutters are used for roughing cuts on components and they are also preferred to use inside holes there you need chip evacuation better and doing a finish cut later. These are true 55 HRC cutters used on steel and stainless steel material can also work on cast iron and aluminum.