Tabikut

Tabikut 1 mm Carbide Ballnose 60 Hr... ₹ 531.00

UPTO 6 MM 50 mm Length price is for 2 Nos. If you order 1 quantity you will get 2 pcs 460 rs. price is for 2 nos. 1 will cost 230 rs. only. Ballnose are 2 flutes and Endmills are 4 flutes 1 mm Carbide Ballnose 60 Hrc Pack Of 2 Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing Size of Carbide Ballnose 60 Hrc: 1mm 55 HRC AND 60 HRC LOOK SIMILAR BUT THERE IS DIFFERENCE IN QUALITY AND MATERIAL, 60 HRC CAN ALSO BE USED FOR STAINLESS STEEL

WNMG080408 CQ 4609 Chipbreaker Insert Steel Grade Of Tabikut Pack Of 10

Tabikut WNMG080408 CQ 4609 Chipbrea... ₹ 1,416.00

WNMG080408 CQ4609 Carbide Insert with 0.8 mm Radius used on Steel , Mild Steel General Parameters are mentioned on box 1 Box contain 10 inserts. This is Steel Grade not cast iron

Tabikut Carbide Insert APGT113504/0... ₹ 1,770.00

APGT113504/08 INSERT for Aluminium Brass and Soft material its replaceable to APMT1135 insert so you can use same cutter for this also Do not use on steel , stainless steel , cast iron or hard material

SPMG140512 TABIKUT Carbide Drilling Insert

Tabikut SPMG140512 TB40G Carbide Dr... ₹ 2,478.00

SPMG140512 U drill mostly range from 42,43,44,45,46,47,48,49,50, mm to 50 mm Cutting speed Vc 150-220 m/min , feed 0.05-0.12 this is general recommendation you need to do some trial to find out best suitable parameters. This is multi grade used on mostly all material , 1 box contain 10 inserts.

Sold out

4 mm Carbide Ballnose 2 Flutes | TABIKUT

Tabikut 4 mm Carbide Ballnose 2 Flu... ₹ 637.00

4 mm Carbide Ballnose 2 Flutes TABIKUT 60 HRC pack of 2Ballnose are 2 flutes and Endmills are 4 flutes Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill etc, Plastic Packaging for non-breakable packing 55 HRC AND 60 HRC LOOK SIMILAR BUT THERE IS DIFFERENCE IN QUALITY AND MATERIAL, 60 HRC CAN ALSO BE USED FOR STAINLESS STEEL

TNMG160404/08/12 CQ 4609 Chipbreaker Insert Steel Grade Of Tabikut Pack Of 10

TNMG160404/08/12 CQ 4609 Chipbreaker Insert Steel

Tabikut TNMG160404/08/12 CQ 4609 Ch... ₹ 1,322.00

TNMG160408 CQ 4609 Carbide Insert with 0.8 mm Radius used on Steel , Mild Steel General Parameters are mentioned on box 1 Box contain 10 inserts. This is Steel Grade not cast iron

Tabikut TNMG160404/08 TM 4609 Inser... ₹ 1,322.00

TNMG160408 TM 4609 Carbide Insert with 0.8 mm Radius used on Steel , Mild Steel General Parameters are mentioned on box 1 Box contain 10 inserts. This is Steel Grade not cast iron

5 mm Carbide Ballnose 55 Hrc 6 mm Shank | ballnose

5 mm Carbide Ballnose 55 Hrc 6 mm Shank size 50,75 and 100 mm long

Tabikut 5 mm Carbide Ballnose 55 Hr... from ₹ 354.00

5 mm Carbide Ballnose 55 Hrc 6 mm Shank size 50,75 and 100 mm longBronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing

Sold out

Tabikut 6 mm Carbide Ballnose 60 HR... ₹ 1,274.00

6 mm Carbide Ballnose 60 HRC PACK OF 2UPTO 6 MM 50 mm Length price is for 2 Nos. If you order 1 quantity you will get 2 pcs Ballnose are 2 flutes and Endmills are 4 flutes Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle , Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill etc, Plastic Packaging for non-breakable packing 55 HRC AND 60 HRC LOOK SIMILAR BUT THERE IS DIFFERENCE IN QUALITY AND MATERIAL , 60 HRC CAN ALSO BE USED FOR STAINLESS STEEL

Tabikut 8 mm Carbide Endmill 45 HRC... ₹ 443.00

8 mm Carbide Endmill 45 HRC PACK OF 1Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Black Coating TiALin Coating, Endmill for Better Life and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, Plastic Packaging for non-breakable. Pack of 1 means Qty. 1 Pack of 2 means price is for 2 nos.

2.5 Mm Carbide Ballnose 55 HRC PACK OF 2

Tabikut 2.5 Mm Carbide Ballnose 55 ... ₹ 434.00

Solid Carbide Cutter are used to machine Hard and tough Material , Steel , Alloy Steel , Cast iron , stainless steel and many other material grades. Bronze TiSiN Coating , Endmill for Better Life and wear resistance.35 Degree Helix Angel , Grain Size 0.5μmUsed for Face Mill , Shoulder mill , side mill etc ,Plastic Packaging for non breakable packing Flute Length of Ballnose is double of diameter if diameter is 1 mm flute length will be 2 mm same for other sizes , if total length increase flute length remain same of double of diameter.

CNMA120408/12 TK1509 CAST IRON INSERT TABIKUT Pack Of 10

Tabikut CNMA120408/12 TK1509 CAST I... ₹ 1,416.00

CNMA120408/12 TK1509 Carbide Insert with 0.8 mm Radius used on Cast Iron General Parameters are mentioned on box 1 Box contain 10 inserts.

CCMT060204 4609 TABIKUT Carbide Insert For Steel Black Pack Of 10

Tabikut CCMT060204 4609 TABIKUT Car... ₹ 1,298.00

CCMT060204 Steel Grade Used in boring bar for boring application Double Coated for heat resistant.

Tabikut TABIKUT Carbide Insert APMT... ₹ 1,298.00

WE SELL ORIGINAL INSERTS ONLY APMT1135 TABIKUT TF309 Carbide insert for Steel and Stainless Steel machining with or without coolant , used in any suitable cutter for BAP300R and this is used in milling machine mainly. Suitable cutter any cutter which suits APMT1135 insert.For steel , mild steel , hrc upto 45 with coolant.APMT1135 for BAP300R cutters brown coatedSUITABLE TO ALL MILLING CUTTER FOR APMT1135

SOMT040202 Tabikut carbide insert steel grade pack of 10

Tabikut SOMT040202 Tabikut carbide ... ₹ 2,124.00

SOMT040202 is a very small insert used for small size of u drills, kindly check your u drill requirement This is multi grade used on mostly all material , 1 box contain 10 inserts.THESE ARE SUITABLE TO U DRILLS FROM 9 MM TO 12.5 MM WHICH ARE SOMT TYPE NOT SPMT , SPMG , SPET ETC.

APMT1604 t60 golden coated grade Carbide Insert Tabikut pack of 10

Tabikut APMT1604 t60 golden coated ... ₹ 2,242.00

APMT1604 t60 golden coated grade Carbide Insert Tabikut pack of 10WE SELL ORIGINAL INSERTS ONLY APMT1604 T60 . T60 Grade is for general machining steel stainless steel Forging etc. Carbide inserts for Steel and Stainless Steel machining with or without coolant, are used in any suitable cutter for BAP400R and this is used in milling machines mainly. Suitable cutter any cutter which suits APMT1604 insert.For steel, mild steel, HRC upto 45-55 with and without coolantAPMT1604 for BAP400R cutters brown coatedSUITABLE TO ALL MILLING CUTTERS FOR APMT1604

10 mm Carbide Endmill 75/100 Long 45 HRC PACK OF 1

Tabikut 10 mm Carbide Endmill 75/10... from ₹ 699.00

10 mm Carbide Endmill 75/100 Long 45 HRC PACK OF 1Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. black TiALin Coating, Endmill for Better Life and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmThey are used for Face mills, Shoulder mills, side mills, etc, and Plastic Packaging for non-breakable. Pack of 1 means Qty. 1 Pack of 2 means price is for 2 nos.

Tabikut Micro Endmill 0.8 Mm 4mm Sh... ₹ 502.00

Micro Endmill 0.8 mm with 2 Flutes and 4 mm Shank 0.6 mm Flute Length

Tabikut 3.5 mm Carbide Endmill 55 H... ₹ 295.00

3.5 mm Carbide Endmill 55 HRC 4 mm Shank Length 50 MmSolid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill , side mill etc, Plastic Packaging for non-breakable packing

Sold out

Tabikut 2 Mm Carbide Ballnose 60 HR... ₹ 531.00

UPTO 6 MM 50 mm Length price is for 2 Nos. If you order 1 quantity you will get 2 pcs 460 rs. price is for 2 nos. 1 will cost 230 rs. only. Ballnose are 2 flutes and Endmills are 4 flutes Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. .Bronze TiSiN Coating, Endmill for Better Life, and wear resistance35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing 55 HRC AND 60 HRC LOOK SIMILAR BUT THERE IS DIFFERENCE IN QUALITY AND MATERIAL, 60 HRC CAN ALSO BE USED FOR STAINLESS STEEL