TORX SCREW (NORMAL)
TORX SCREW (HP)
Shank Type Cutter
Modular Face Mill Cutter
Indexable Milling Cutters
ER NUT
LOCKING DEVICE
ER SPANNER
ER COLLET
BT40 HOLDER
CYLINDRICAL COLLET CHUCK
PULL STUDS
BT30 HOLDER
TORX SCREW (GREY)
DRILL CHUCK
EDGE FINDER
Z setter
ER TAP COLLET
C TYPE BORING HEAD
TORX KEY
BBT40
U Drill
Turning Tool Holders
SK40 HOLDERS
ER Collets
ARBOR
Indexable Cutters
Metrology
ISO40 HOLDERS
TORX SCREW (UHP)
DEAL
TORX KEY HP
Hydraulic Collet
BORING KIT
Carbide Boring Bar
SDJ Boring heads
UHP ER COLLET
Steel Boring Bar
Threading Boring Bar
TORX KEY HANDLE
Indexable Milling Cutter
Chamfer Cutter
Multifunction Drill
Carbide Milling Inserts
EWN Fine Boring head
TCT Rough Boring Head
EXTENSION
BST HOLDER
Grooving Bar
ECCENTRIC SLEEVE
Back to all products
mars-tech
All products
5 & 6 Flute Endmills
Accessories
Accessories APP
Accessories APP 2
All
Ballnose (45 HRC)
Ballnose (55 HRC)
Ballnose (60 HRC)
Ballnose (65 HRC)
Ballnose (65 HRC)
Ballnose (Inserted)
Ballnose - 45 HRC
Ballnose - 55 HRC
Ballnose - 55 HRC 1
Ballnose - 60 HRC
Ballnose - 60 HRC 1
Ballnose 4 Flute (55HRC)
BBT40 Holders
Boring Heads
BPT
BT-30 Type
BT-40 BCA
BT-40 Type
Carbide Cutters
Carbide Cutters
Carbide Drills
CARBIDE15
CBN Inserts
Ceramic
Ceratizit
Cermet
Chamfer Cutter
Chamfering
Collet Chucks
Collet Chuks
Collet ER Types
Collets - ER Type
Corner Radius Endmill
Cutters High Feed
Cylindrical Chuks
Cylndrical Chuck
Dasqua
Deal of the Day
Deskar
Dijet
Drill Chuck - Keyless
Drilling Insert
Duracarb
Edge Finders
Endmill (3 Flute) DLC
Endmill (45 HRC)
Endmill (55 HRC) 1
Endmill (60 HRC)
Endmill (65 HRC)
Endmill (Inserted)
Endmill - 45 HRC
Endmill - 55 HRC
Endmill - 55 HRC 1
Endmill - 60 HRC
Endmill - 60 HRC 1
Endmill 2 Flute
Endmill Ballnose - Micro
ER Collets
ER Nuts
ER Spanners
ER Tap Collets
Find the Edge
Gauges
Grooving Inserts
Grooving Work
Heads - Boring
High Feed
Hitachi
HRC63(Nano Coated)
Indexable Cutters
Inserted Ballnose
Inserted Cutters
Inserted Endmill
Inserts
INSERTS15
ISO40 Holders
Jaibros
JXD
Keyless Drill Chuck
Knob - Pull Studs
Knob- Pull Studs
Korloy
Korloy
Kyocera
Life
Locking Device
Long Neck Cutters
Mars-Tech
Measurings
Metrology
Micro Endmill Ballnose
Milling Inserts
Milling Opertations
Miscellaneous
Mitsubishi
Multifunction Tools
Non Standard Endmills
Non-Ferrous
Nuts - ER
Nuts ER
PCD Inserts
Promo Inserts
Pull Studs
Rougher Endmills
Single Flute Endmill
SK-40 Type
Spanner - ER
Spanners - ER
Straight Shank Chucks
Tabikut
Tabikut Inserts
TaeguTec
Threading Application
Threading Inserts
Tool Boy
Tools Boy
Torx Keys
Torx Screws
TURNING
Turning Holders
Turning Inserts
Turning Usage
U Drill
Uncoated End & Ball
volume discount
Wholesale Deals
Widia
Yuzuki
Z Setter
ZCCCT
Zero Pre Setter
Zero Setter
Mars-Tech
ER20 Collet Ultra high prec...
from ₹ 578.00
The standard ER collet is the most widely used clamping system in the world.Made from Alloy spring steel and fully hardened these ER collets are ideal for many machining applications including boring, milling, reaming, tapping and grinding. Unless specified differently all of our ER collets feature runout of 0.010 micron or less. ,ER collet sizes start at ER8 through ER50.
ER20 series collets have a capacity of 1mm-14mm. Each ER20 collet has a range of (1 mm). The size indicated on the collet is the largest size it can hold and can be collapsed smaller within its collapse range of (0.9mm). For example, ER20-3mm can grab a round shank from 3mm diameter to 2.1mm diameter.
Mars-Tech
ER20 Spanner M Type A Type ...
from ₹ 181.00
ER20M/A/UM Wrench is made from high quality alloy steel ,Thick material allows high torque without bending,5 point contact ensures no distortion of collet nut while tightening,ER20 Wrench works on all of our M Type and A type collet chucks that take ER20 collets
Mars-Tech
ER20 um SPANNER TYPE pack of 1
₹ 457.00
ER20UM Spanner for ER20UM regofix type nut , tighten it and loosen it
Mars-Tech
ER20M SPANNER TYPE pack of 1
₹ 288.00
ER20M Spanner for ER20 miniature type nut , tighten it and loosen it
Mars-Tech
ER25 Collet set 1 mm to16 m...
₹ 4,634.00
THIS SET HAS 16 COLLETS 1 MM TO 16 MM EACH 1 NOS.
The standard ER collet is the most widely used clamping system in the world.Made from Alloy spring steel and fully hardened these ER collets are ideal for many machining applications including boring, milling, reaming, tapping and grinding. Unless specified differently all of our ER collets feature runout of 0.010 micron or less. ,ER collet sizes start at ER8 through ER50.
ER32 series collets have a capacity of 1mm-20mm. Each ER32 collet has a range of (1 mm). The size indicated on the collet is the largest size it can hold and can be collapsed smaller within its collapse range of (0.9mm). For example, ER32-6mm can grab a round shank from 6mm diameter to 5.1mm diameter.
Mars-Tech
ER25 Collet Ultra high prec...
₹ 602.00
The standard ER collet is the most widely used clamping system in the world.Made from Alloy spring steel and fully hardened these ER collets are ideal for many machining applications including boring, milling, reaming, tapping and grinding. Unless specified differently all of our ER collets feature runout of 0.010 micron or less. ,ER collet sizes start at ER8 through ER50.
ER25 series collets have a capacity of 1mm-17mm. Each ER25 collet has a range of (1 mm). The size indicated on the collet is the largest size it can hold and can be collapsed smaller within its collapse range of (0.9mm). For example, ER25-3mm can grab a round shank from 3mm diameter to 2.1mm diameter.
Mars-Tech
ER25 Spanner M Type C Type ...
from ₹ 217.00
ER25M/A/UM Spanner Wrench is made from high quality alloy steel ,Thick material allows high torque without bending,4 point contact ensures no distortion of collet nut while tightening,ER25 Wrench works on all of our M Type and UM type collet chucks that take ER25 collets
Mars-Tech
Er25 Spanner Um Type High Q...
₹ 310.00
ER25UM Spanner Wrench is made from high quality alloy steel ,Thick material allows high torque without bending,4 point contact ensures no distortion of collet nut while tightening,ER25 Wrench works on UM type collet chucks that take ER25 collets
Mars-Tech
ER25M SPANNER TYPE pack of 1
₹ 361.00
ER25M Spanner for ER25 miniature type nut , tighten it and loosen it
Mars-Tech
ER32 Collet Ultra high prec...
from ₹ 631.00
The standard ER collet is the most widely used clamping system in the world.Made from Alloy spring steel and fully hardened these ER collets are ideal for many machining applications including boring, milling, reaming, tapping and grinding. Unless specified differently all of our ER collets feature runout of 0.010 micron or less. ,ER collet sizes start at ER8 through ER50.
ER32 series collets have a capacity of 1mm-20mm. Each ER32 collet has a range of (1 mm). The size indicated on the collet is the largest size it can hold and can be collapsed smaller within its collapse range of (0.9mm). For example, ER32-6mm can grab a round shank from 6mm diameter to 5.1mm diameter.
Mars-Tech
Er32 Spanner Um Type High Q...
₹ 382.00
ER32 UM TYPE Spanner Wrench is made from high quality alloy steel ,Thick material allows high torque without bending,4 point contact ensures no distortion of collet nut while tightening,ER32 Wrench works on all of our UM Type and UM type collet chucks that take ER32 collets
Mars-Tech
Er32 Spanner wrench for ER ...
from ₹ 229.00
ER32 UM and C Type Spanner Wrench is made from high quality alloy steel ,Thick material allows high torque without bending,4 point contact ensures no distortion of collet nut while tightening,ER32 Wrench works on all of our UM Type and UM type collet chucks that take ER32 collets
Mars-Tech
ER40 Collet Ultra high prec...
₹ 802.00
The standard ER collet is the most widely used clamping system in the world.Made from Alloy spring steel and fully hardened these ER collets are ideal for many machining applications including boring, milling, reaming, tapping and grinding. Unless specified differently all of our ER collets feature runout of 0.010 micron or less. ,ER collet sizes start at ER8 through ER50.
ER40 series collets have a capacity of 3mm-26mm. Each ER32 collet has a range of (1 mm). The size indicated on the collet is the largest size it can hold and can be collapsed smaller within its collapse range of (0.9mm). For example, ER40-6mm can grab a round shank from 6mm diameter to 5.1mm diameter.
Mars-Tech
ER40 Spanner UM TYPE And C ...
from ₹ 289.00
ER40 UM AND C TYPE Spanner Wrench is made from high quality alloy steel ,Thick material allows high torque without bending,4 point contact ensures no distortion of collet nut while tightening,ER40 Wrench works on all of our UM Type and UM type collet chucks that take ER40 collets
Mars-Tech
ER40 Spanner Um Type High Q...
₹ 467.00
ER40 UM Spanner Wrench is made from high quality alloy steel ,Thick material allows high torque without bending,4 point contact ensures no distortion of collet nut while tightening,ER40 Wrench works on all of our UM Type and UM type collet chucks that take ER40 collets
Mars-Tech
ER50 SPANNER UM TYPE And C ...
₹ 903.00
ER50 UM AND C TYPE Spanner Wrench is made from high quality alloy steel ,Thick material allows high torque without bending,4 point contact ensures no distortion of collet nut while tightening,ER50 Wrench works on all of our UM Type and UM type collet chucks that take ER50 collets
Mars-Tech
ER8 Ccollet DIN6499B AA 0....
₹ 590.00
The standard ER collet is the most widely used clamping system in the world.Made from Alloy spring steel and fully hardened these ER collets are ideal for many machining applications including boring, milling, reaming, tapping and grinding. Unless specified differently all of our ER collets feature runout of 0.005 micron or less. ,ER collet sizes start at ER8 through ER50.
ER8 series collets have a capacity of 1mm-5mm. Each ER8 collet has a range of (0.5mm). The size indicated on the collet is the largest size it can hold and can be collapsed smaller within its collapse range of (0.5mm). For example, ER8-3mm can grab a round shank from 3mm diameter to 2.5mm diameter.
Mars-Tech
ER8M SPANNER TYPE BLACK pac...
₹ 198.00
ER8M Spanner for ER8 miniature type nut , tighten it and loosen it
Mars-Tech
ER8M SPANNER TYPE pack of 1
₹ 301.00
ER8M Spanner for ER8 miniature type nut , tighten it and loosen it
Mars-Tech
ERG Tap Collets ERG32 Selec...
₹ 903.00
ER TAP COLLETS ARE SIMILAR LIKE ER COLLETS AND CAN FIT INTO SAME COLLET CHUCK USED FOR ER COLLETS, BUT IT DOES NOT HAVE COLLAPSIBILITY AND EVERY COLLET COME FOR A FIXED SIZE.
EVERY TAP HAS A SQUARE AND ROUND SO YOU JUST NEED TO CHECK SQUARE AND ROUND SIZE OF TAP AND ER CHUCK SIZE THAN YOU CHOOSE WHAT COLLET WILL FULFILL YOUR PURPOSE
Tapping collets will allow user to convert collet chucks used for many purposes into tapping chucks. ER Tapping Collets with Square Drive for synchronous tapping operations using any RD/ER collet chuck. Collet bore is exact tool diameter, with square drive, for accuracy and rigidity. Square in the ER Tap collet is offer tight grip for Tap which reduces slippage in Collets. Available sealed for coolant-through applications, as well as in DIN and JIS standard metric sizes.