Tabikut

1.5 mm endmill 4 mm shank 50 long pack of 20

Tabikut 1.5 mm endmill 4 mm shank 5... ₹ 1,534.00

THROW AWAY PRICE UNIT COST 65 RS 1.5MM 4 FLUTE 45 HRC PURPLE COATED CUTTER CAN BE USED ON STEEL , SS CI AND NON FERROUS DEALS ARE NOT RETURNABLE AND EXCHANGABLE AT ANY CONDITION

1.5 mm in 6 mm Shank 55 HRC Tabikut pack of 1

Tabikut 1.5 mm in 6 mm Shank 55 HRC... ₹ 443.00

6 mm Shank 1.5 mm Endmill 55 HRC Tabikut pack of 1Carbide Endmill-55 HRC SPECIAL SIZE OF 1MM CUTTING DIA 6 MM SHANK Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Black Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill etc, Plastic Packaging for non-breakable packing

Tabikut 1.5mm 3 flute endmill DLC c... ₹ 443.00

1.5mm 3 flute endmill DLC coated pack of 13 Flute Carbide Endmills are used for non-ferrous materials and soft materials like aluminum, brass, copper, silver, and gold. These DLC-coated endmills are for longer life on aluminum or sticky material machining. The advantage of DLC coating is it reduces friction and makes the chip evacuation more smooth and better surface quality The large core diameter is more stable A negative rake angle design enhances the rigidity of the tool TF25 carbide rod for soft material.

Tabikut 10 mm 4 flute Ballnose 55 h... ₹ 1,195.00

4 Flutes Ballnose. Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, Plastic Packaging for non-breakable packing Size of Carbide Ballnose 55 Hrc: 3mm The flute Length of the Ballnose is double of diameter if the diameter is 1 mm flute length will be 2 mm same for other sizes if the total length increase flute length remains the same double diameter

Tabikut 10 mm Carbide Ballnose 45 H... from ₹ 738.00

10 mm Carbide Ballnose 45 HRC PACK OF 1Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Wine Coating TiALin Coating, Endmill for Better Life and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmThey are used for Face mills, Shoulder mills, side mills, etc, and Plastic Packaging for non-breakable. Size of Carbide Ballnose 45 HRC: 10 mm Pack of 1 means Qty. 1 Pack of 2 means price is for 2 nos.

10 Mm Carbide Ballnose 55 HRC 2 Flutes ,Shank 10 MM Flute Length 20 Mm Total Length Is 75/100/150/200 Mm

Tabikut 10 Mm Carbide Ballnose 55 H... from ₹ 1,062.00

10 Mm Carbide Ballnose 55 HRC 2 Flutes, Shank 10 MM Flute Length 20 Mm Total Length Is 75/100/150/200 MmSolid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing The flute Length of the Ballnose is double of diameter if the diameter is 1 mm flute length will be 2 mm same for other sizes if the total length increase flute length remains the same as the double diameter.

Sold out

Tabikut 10 mm Carbide Ballnose 60 H... ₹ 1,623.00

Ballnose are 2 flutes and Endmills are 4 flutes 10 mm Carbide Ballnose 60 HRC 75 mm long PACK OF 1Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, Plastic Packaging for non-breakable packing 55 HRC AND 60 HRC LOOK SIMILAR BUT THERE IS DIFFERENCE IN QUALITY AND MATERIAL, 60 HRC CAN ALSO BE USED FOR STAINLESS STEEL

10 mm Carbide ballnose 65 HRC 2 Flutes PACK OF 1

Tabikut 10 mm Carbide ballnose 65 H... from ₹ 2,561.00

10 mm Carbide ballnose 65 HRC 2 Flutes PACK OF 1check 2nd image for dimensions 65HRC carbide endmills are made with a high-quality raw material of 0.005 microns of grain size. Helix Angel of 35 degree, Suitable material grades to use on STEEL, STAINLESS STEEL, CAST IRON, AND TITANIUM 2 FLUTES, ALCR TIN COATING, tolerance of diameter is below 30 microns

10 mm Carbide Endmill 55 HRC 10 Mm Shank Flute Length 30 Mm 4 Flutes Total Length Is 75/100/150/200 MM

Tabikut 10 mm Carbide Endmill 55 HR... from ₹ 865.00

10 mm Carbide Endmill 55 HRCSolid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing

Tabikut 10 mm Carbide Endmill 60 HR... from ₹ 1,534.00

10 mm Carbide Endmill 60 HRC 4 FlutesSolid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill etc, Plastic Packaging for non-breakable packing Size of Solid Carbide Cutter 60 HRC: 10 mm

10 mm Carbide Endmill 65 HRC 4 Flutes LONG PACK OF 1

Tabikut 10 mm Carbide Endmill 65 HR... from ₹ 2,655.00

10 mm Carbide Endmill 65 HRC 4 Flutes10X75/100 LONG PACK OF 1check 2nd image for dimensions 65HRC carbide endmills are made with a high-quality raw material of 0.005 microns of grain size. Helix Angel of 35 degrees, Suitable material grades to use on STEEL, STAINLESS STEEL, CAST IRON, AND TITANIUM 4 FLUTES, ALCR TIN COATING, tolerance of diameter is below 30 microns

Sold out

Tabikut 10 mm Carbide Endmill 75/10... from ₹ 699.00

10 mm Carbide Endmill 75/100 Long 45 HRC PACK OF 1Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Wine Coating TiALin Coating, Endmill for Better Life and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmThey are used for Face mills, Shoulder mills, side mills, etc, and Plastic Packaging for non-breakable. Pack of 1 means Qty. 1 Pack of 2 means price is for 2 nos.

10 mm Endmill long flute length 55 HRC 4 Flutes Total Length Is 100 MM pack of 1

Tabikut 10 mm Endmill long flute le... ₹ 2,955.00

10 mm with 50 mm flute length 10 mm shank 100 mm overall length Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill etc, Plastic Packaging for non-breakable packing

Tabikut 10 mm Uncoated endmill pack... from ₹ 1,100.00

2/3/4 Flute uncoated Carbide Endmills are used for non-ferrous materials and soft materials like aluminum, brass, copper, silver, and gold. A uncoated endmill is for longer life on aluminum or sticky material machining. The large core diameter is more stable A negative rake angle design enhances the rigidity of the tool TF25 carbide rod for soft material.

Tabikut 10mm 3 flute endmill 75/100... from ₹ 1,257.00

10mm 3 flute endmill 75/100 mm long DLC coated pack of 13 Flute Carbide Endmills are used for non-ferrous materials and soft materials like aluminum, brass, copper, silver, and gold. A DLC-coated endmill is for longer life on aluminum or sticky material machining. The advantage of DLC coating is it reduces friction and makes the chip evacuation more smooth and better surface quality The large core diameter is more stable A negative rake angle design enhances the rigidity of the tool TF25 carbide rod for soft material.

10mm Rougher cutter in 75 &100 mm length

Tabikut 10mm Rougher cutter in 75&1... from ₹ 1,433.00

Rougher cutter are used for roughing cut on component and they are also preferred to use inside holes there you need chip evacuation better and doing a finish cut later. These are true 55 HRC cutter used on steel and stainless steel material can also work on cast iron and aluminium.

11 MM 2 flute cutter in 12 mm shank 45/55 hrc pack of 1

Tabikut 11 MM 2 flute cutter in 12 ... from ₹ 873.00

FLUTE LENGTH 35 MM metal and wood ,plastic sheet , less hardened material

Tabikut 11 mm Carbide Endmill 55 HR... ₹ 1,947.00

11 mm Carbide Endmill 55 HRC 4 Flutes Total Length 75mm pack of 111 MM in 12 mm shank 75 mm total length Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing

11IR 1.0 ISO Internal Threading Tabikut Carbide Insert pack of 10

Tabikut 11IR 1.0 ISO Internal Threa... ₹ 2,537.00

This is Internal Threading Insert for turning machine 1.0 ISO standard threading. High profile accuracy. Parameters are mentioned on the Box back side suitable to mostly steel grade, stainless steel grade Prevents chip curling, thus less tool breakage.

11IR 1.25 ISO Internal Threading Tabikut Carbide Insert pack of 10

11IR 1.25 ISO Internal Threading Tabikut Carbide Insert

Tabikut 11IR 1.25 ISO Internal Thr... ₹ 2,537.00

This is Internal Threading Insert for turning machine 1.25 ISO standard threading. High profile accuracy. Parameters are mentioned on the Box back side suitable to mostly steel grade , stainless steel grade Prevents chip curling, thus less tool breakage.