Back to all products
Tabikut
All products
Accessories
All
Ballnose (45 HRC)
Ballnose (55 HRC)
Ballnose (60 HRC)
Ballnose (65 HRC)
Ballnose (Inserted)
Ballnose - 45 HRC
Ballnose - 55 HRC
Ballnose - 55 HRC 1
Ballnose - 60 HRC
Ballnose - 60 HRC 1
BBT40 Holders
Boring Heads
BPT
BT-30 Type
BT-40 BCA
BT-40 Type
Carbide Cutters
Carbide Cutters
Carbide Drills
CBN Inserts
Ceratizit
Chamfer Cutter
Chamfering
Collet Chucks
Collet Chuks
Collet ER Types
Collets - ER Type
Corner Radius Endmill
Cutters High Feed
Cylindrical Chuks
Cylndrical Chuck
Dasqua
Deal of the Day
Deskar
Dijet
Drill Chuck - Keyless
Duracarb
Edge Finders
Endmill (3 Flute) DLC
Endmill (45 HRC)
Endmill (55 HRC) 1
Endmill (60 HRC)
Endmill (Inserted)
Endmill - 45 HRC
Endmill - 55 HRC
Endmill - 55 HRC 1
Endmill - 60 HRC
Endmill - 60 HRC 1
Endmill Ballnose - Micro
ER Collets
ER Nuts
ER Spanners
ER Tap Collets
Find the Edge
Gauges
Grooving Inserts
Grooving Work
Heads - Boring
High Feed
Hitachi
Indexable Cutters
Inserted Ballnose
Inserted Cutters
Inserted Endmill
Inserts
ISO40 Holders
Jaibros
JXD
Keyless Drill Chuck
Knob - Pull Studs
Knob- Pull Studs
Korloy
Korloy
Kyocera
Life
Locking Device
Long Neck Cutters
Mars-Tech
Measurings
Metrology
Micro Endmill Ballnose
Milling Inserts
Milling Opertations
Miscellaneous
Mitsubishi
Non Standard Endmills
Non-Ferrous
Nuts - ER
Nuts ER
PCD Inserts
Pull Studs
Rougher Endmills
Single Flute Endmill
SK-40 Type
Spanner - ER
Spanners - ER
Straight Shank Chucks
Tabikut
Tabikut Inserts
TaeguTec
Threading Application
Threading Inserts
Tool Boy
Tools Boy
Torx Keys
Torx Screws
Turning Holders
Turning Inserts
Turning Usage
U Drill
Widia
Yuzuki
Z Setter
ZCCCT
Zero Pre Setter
Zero Setter
Tabikut
1 Mm Carbide Ballnose 2 flu...
₹ 248.00
BALLNOSE ARE 2 FLUTES ONLY.
Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Wine Coating Tialin Coating, Endmill for Better Life and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, Plastic Packaging for non-breakable.
Size of Carbide Ballnose: 1 mm
Pack of 1 means Qty. 1 Pack of 2 means price is for 2 nos.
Tabikut
1 mm Carbide Ballnose 55 Hr...
₹ 350.00
Solid Carbide Cutter are used to machine Hard and tough Material , Steel , Alloy Steel , Cast iron , stainless steel and many other material grades.
Bronze TiSiN Coating , Endmill for Better Life and wear resistance.35 Degree Helix Angel , Grain Size 0.5μmUsed for Face Mill , Shoulder mill , side mill etc ,Plastic Packaging for non breakable packing
Size of Carbide Ballnose 55 Hrc: 1mm
Flute Length of Ballnose is double of diameter if diameter is 1 mm flute length will be 2 mm same for other sizes , if total length increase flute length remain same of double of diameter.
Tabikut
1 mm Carbide Ballnose 60 Hr...
₹ 450.00
UPTO 6 MM 50 mm Length price is for 2 Nos. you order 1 quantity you will get 2 pcs 460 rs. price is for 2 nos. 1 will cost 230 rs. only.
Ballnose are 2 flutes and Endmills are 4 flutes
Solid Carbide Cutter are used to machine Hard and tough Material , Steel , Alloy Steel , Cast iron , stainless steel and many other material grades.
Bronze TiSiN Coating , Endmill for Better Life and wear resistance.35 Degree Helix Angel , Grain Size 0.5μmUsed for Face Mill , Shoulder mill , side mill etc ,Plastic Packaging for non breakable packing
Size of Carbide Ballnose 60 Hrc: 1mm
55 HRC AND 60 HRC LOOKS SIMILAR BUT THERE IS DIFFRENCE IN QUALITY AND MATERIAL , 60 HRC CAN ALSO BE USED FOR STAINLESS STEEL
Tabikut
1 mm Carbide Endmill 45 HRC...
₹ 220.00
Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Wine Coating TiALin Coating, Endmill for Better Life and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing
Size of Carbide Endmill 45 HRC: 1mm
Tabikut
1 mm Carbide Endmill 55 HRC...
₹ 290.00
Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing
Size of Carbide Endmill 55 HRC: 1mm
Tabikut
1 mm Carbide Endmill 60 HRC...
₹ 440.00
UPTO 6 MM 50 mm Length price is for 2 Nos. you order 1 quantity you will get 2 pcs 440 rs. price is for 2 nos. 1 will cost 220 rs. only.
Solid Carbide Cutter are used to machine Hard and tough Material , Steel , Alloy Steel , Cast iron , stainless steel and many other material grades.
Bronze TiSiN Coating , Endmill for Better Life and wear resistance.35 Degree Helix Angel , Grain Size 0.5μmUsed for Face Mill , Shoulder mill , side mill etc ,Plastic Packaging for non breakable packing
Size of Carbide Endmill 60 HRC: 1mm
55 HRC AND 60 HRC LOOKS SIMILAR BUT THERE IS DIFFRENCE IN QUALITY AND MATERIAL , 60 HRC CAN ALSO BE USED FOR STAINLESS STEEL.
Tabikut
1 mm Single Flute Endmill C...
₹ 355.00
ENDMILL -DIAMETER 1-SHANK DIAMETER 3.175-FLUTES 1-FLUTE LENGTH-5-TOTAL LENGTH -38
CEMENTED CARBIDE: These end mills, including the 1 mm Single Flute Endmill with a carbide flute length of 3.5 mm, are made from ultra-fine grain cemented carbide material with good milling and cutting performance, ensuring high work efficiency.
FIT FOR MANY MACHINES: Fit for many milling machines or CNC cutting machines.
SHARP: Single flute-designed end mill with a sharp cutting edge would offer a smooth cutting surface and chip clearing.
HANDEL DIFFERENT MATERIAL: These end mills, including the 1 mm Single Flute Endmill, can be used for cutting acrylic, PVC, MDF, density board, Wood, Gold, Aluminium, and many other soft materials.
Tabikut
1.5 mm Carbide Ballnose 2FL...
₹ 248.00
BALLNOSE ARE 2 FLUTES ONLY.
Solid Carbide Cutter are used to machine Hard and tough Material , Steel , Alloy Steel , Cast iron , stainless steel and many other material grades.
Wine Coating TiALin Coating , Endmill for Better Life and wear resistance.35 Degree Helix Angel , Grain Size 0.5μmUsed for Face Mill , Shoulder mill , side mill etc ,Plastic Packaging for non breakable.
Size of Carbide Ballnose 2 flute: 1.5mm
Pack of 1 means Qty. 1 Pack of 2 means price is for 2 nos.
Tabikut
1.5 Mm Carbide Ballnose 55 ...
₹ 350.00
Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing
Size of Carbide Ballnose: 1.5 mm
The flute Length of Ballnose is double of diameter if the diameter is 1 mm flute length will be 2 mm same for other sizes if the total length increase flute length remains the same double diameter.
Tabikut
1.5 Mm Carbide Ballnose 60 ...
₹ 450.00
UPTO 6 MM 50 mm Length price is for 2 Nos. If you order 1 quantity you will get 2 pcs 460 rs. price is for 2 nos. 1 will cost 230 rs. only.
Ballnose are 2 flutes and Endmills are 4 flutes
Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Bronze Tisin Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for nonbreakable packing
Size of Carbide Ballnose 60 HRC: 1.5mm
55 HRC AND 60 HRC LOOK SIMILAR BUT THERE IS DIFFERENCE IN QUALITY AND MATERIAL, 60 HRC CAN ALSO BE USED FOR STAINLESS STEEL
Tabikut
1.5 mm Carbide Endmill 45 H...
₹ 220.00
Solid Carbide Cutter are used to machine Hard and tough Material , Steel , Alloy Steel , Cast iron , stainless steel and many other material grades.
Wine Coating Tialin Coating , Endmill for Better Life and wear resistance.35 Degree Helix Angel , Grain Size 0.5μmUsed for Face Mill , Shoulder mill , side mill etc ,Plastic Packaging for non breakable packing
Size of Carbide Endmill 45 HRC: 1.5 mm
Tabikut
1.5 mm Carbide Endmill 55 H...
₹ 290.00
Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc. Plastic Packaging for non-breakable packing
Size of Carbide Endmill 55 HRC: 1.5mm
Tabikut
1.5 Mm Carbide Endmill 60 H...
₹ 440.00
UPTO 6 MM 50 mm Length price is for 2 Nos. If you order 1 quantity you will get 2 pcs 440 rs. price is for 2 nos. 1 will cost 220 rs. only.
Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for nonbreakable packing
Size of Carbide Endmill 60 HRC: 1.5 mm
55 HRC AND 60 HRC LOOK SIMILAR BUT THERE IS A DIFFERENCE IN QUALITY AND MATERIAL, 60 HRC CAN ALSO BE USED FOR STAINLESS STEEL.
Tabikut
1.5 mm Single Flute Endmill...
₹ 355.00
ENDMILL -DIAMETER 1.5-SHANK DIAMETER 3.175-FLUTES 1-FLUTE LENGTH-8/12-TOTAL LENGTH -38
CEMENTED CARBIDE: These end mills, including the 1.5 mm Single Flute Endmill with a carbide flute length of 5 and 12 mm, are made from ultra-fine grain cemented carbide material with good milling and cutting performance, ensuring high work efficiency.
FIT FOR MANY MACHINES: Fit for many milling machines or CNC cutting machines.
SHARP: Single flute-designed end mill with a sharp cutting edge would offer a smooth cutting surface and chip clearing.
HANDEL DIFFERENT MATERIAL: These end mills, including the 1.5 mm Single Flute Endmill, can be used for cutting acrylic, PVC, MDF, density board, Wood, Gold, Aluminium, and many other soft materials.
Tabikut
10 mm Carbide Ballnose 45 H...
from ₹ 625.00
Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Wine Coating TiALin Coating, Endmill for Better Life and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmThey are used for Face mills, Shoulder mills, side mills, etc, and Plastic Packaging for non-breakable.
Size of Carbide Ballnose 45 HRC: 10 mm
Pack of 1 means Qty. 1 Pack of 2 means price is for 2 nos.
Tabikut
10 Mm Carbide Ballnose 55 H...
from ₹ 783.00
Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing
The flute Length of the Ballnose is double of diameter if the diameter is 1 mm flute length will be 2 mm same for other sizes if the total length increase flute length remains the same as the double diameter.
Tabikut
10 mm Carbide Ballnose 60 H...
₹ 1,375.00
Ballnose are 2 flutes and Endmills are 4 flutes
Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, Plastic Packaging for non-breakable packing
55 HRC AND 60 HRC LOOK SIMILAR BUT THERE IS DIFFERENCE IN QUALITY AND MATERIAL, 60 HRC CAN ALSO BE USED FOR STAINLESS STEEL
Tabikut
10 mm Carbide Endmill 55 HR...
from ₹ 712.00
Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing
Tabikut
10 mm Carbide Endmill 60 HR...
from ₹ 1,250.00
Solid Carbide Cutter are used to machine Hard and tough Material , Steel , Alloy Steel , Cast iron , stainless steel and many other material grades.
Bronze TiSiN Coating , Endmill for Better Life and wear resistance.35 Degree Helix Angel , Grain Size 0.5μmUsed for Face Mill , Shoulder mill , side mill etc ,Plastic Packaging for non breakable packing
Size of Solid Carbide Cutter 60 HRC: 10 mm
Tabikut
10mm Rougher cutter in 75&1...
from ₹ 1,099.00
Rougher cutter are used for roughing cut on component and they are also preferred to use inside holes there you need chip evacuation better and doing a finish cut later.
These are true 55 HRC cutter used on steel and stainless steel material can also work on cast iron and aluminium.