Thumbnail for 16 mm Carbide Endmill 65 HRC 4 Flutes LONG PACK OF 1

16 mm Carbide Endmill 65 HRC 4 Flutes LONG PACK OF 1

16 mm Carbide Endmill 65 HRC 4 Flutes LONG PACK OF 1

Brand - Tabikut

₹ 6,190.00

SKU: JBRS3167

0 LEFT IN STOCK

Product description

16 mm Carbide Endmill 65 HRC 4 Flutes 16X100 LONG PACK OF 1

check 2nd image for dimensions

65HRC carbide endmills are made with a high-quality raw material of 0.005 microns of grain size.

Helix Angel of 35 degree, Suitable material grades to use on STEEL, STAINLESS STEEL, CAST IRON, AND TITANIUM

4 FLUTES, ALCR TIN COATING, tolerance of diameter is below 30 microns

Products are usually delivered in 3-7 days depending upon your location.

0 have this item in their cart.

Related Product

Tabikut 16mm Rougher cutter in 100 ... ₹ 4,508.00

Rougher cutter are used for roughing cut on component and they are also preferred to use inside holes there you need chip evacuation better and doing a finish cut later. These are true 55 HRC cutter used on steel and stainless steel material can also work on cast iron and aluminium.

Tabikut 16 mm Carbide Ballnose 55 H... from ₹ 3,446.00

16 mm Carbide Ballnose 55 HRC 2 Flutes, Shank 16 MM Flute Length 40 Mm Total Length Is 100/150 MmSolid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing The flute Length of the Ballnose is double of diameter if the diameter is 1 mm flute length will be 2 mm same for other sizes , if total length increase flute length remain same of double of diameter.

16 mm Carbide Endmill 45 HRC-4 FLUTES- 100 MM LONG PACK OF 1

Tabikut 16 mm Carbide Endmill 45 HR... ₹ 2,275.00

Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. BLACK Coating TiALin Coating, Endmill for Better Life and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, Plastic Packaging for non-breakable. COLOR MAY HAVE SLIGHTLY DIFFERET DUE TO PHOTOGRAPHY

Tabikut 16 mm Carbide Endmill 55 HR... from ₹ 3,127.00

Solid CARBIDE CUTTER are used to machine Hard and tough Material, Steel, Alloy Steel, Cast iron, stainless steel and many other material grades.

Related Products

Tabikut 16mm Rougher cutter in 100 ... ₹ 4,508.00

Rougher cutter are used for roughing cut on component and they are also preferred to use inside holes there you need chip evacuation better and doing a finish cut later. These are true 55 HRC cutter used on steel and stainless steel material can also work on cast iron and aluminium.

Tabikut 16 mm Carbide Ballnose 55 H... from ₹ 3,446.00

16 mm Carbide Ballnose 55 HRC 2 Flutes, Shank 16 MM Flute Length 40 Mm Total Length Is 100/150 MmSolid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing The flute Length of the Ballnose is double of diameter if the diameter is 1 mm flute length will be 2 mm same for other sizes , if total length increase flute length remain same of double of diameter.

Tabikut 16 mm Carbide Endmill 45 HR... ₹ 2,275.00

Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. BLACK Coating TiALin Coating, Endmill for Better Life and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, Plastic Packaging for non-breakable. COLOR MAY HAVE SLIGHTLY DIFFERET DUE TO PHOTOGRAPHY

Tabikut 16 mm Carbide Endmill 55 HR... from ₹ 3,127.00

Solid CARBIDE CUTTER are used to machine Hard and tough Material, Steel, Alloy Steel, Cast iron, stainless steel and many other material grades.