3 mm Carbide Endmill 65 HRC 4 Flutes PACK OF 1

₹ 584.00
SKU: JBRS2405

Size

Dia 3 in 3 MM SHANK Dia 3 in 4 MM SHANK Dia 3 in 3 mm shank 75 long Dia 3 in 3 mm shank 100 long

3 mm Carbide Endmill 65 HRC 4 Flutes PACK OF 1

Brand - Tabikut
₹ 584.00
SKU: JBRS2405

Size

Dia 3 in 3 MM SHANK Dia 3 in 4 MM SHANK Dia 3 in 3 mm shank 75 long Dia 3 in 3 mm shank 100 long
0 LEFT IN STOCK

Get Rs.50 Off on Prepaid Orders above Rs.500 via Razorpay Gateway. (Discount will be applied During Checkout at Payment Gateway) (No Code Required)

Product description

3 mm Carbide Endmill 65 HRC 4 Flutes PACK OF 1

check 2nd image for dimensions 

65HRC carbide endmills are made with a high-quality raw material of 0.005 microns of grain size.

Helix Angel of 35 degrees, Suitable material grades to use on STEEL, STAINLESS STEEL, CAST IRON, AND TITANIUM

4 FLUTES, ALCR TIN COATING, tolerance of diameter is below 30 microns

Products are usually delivered in 3-7 days depending upon your location.

0 have this item in their cart.
Add to cart

Add to cart

Related Products

Carbide Endmill
Tabikut 3 Mm -3/4mm SHANK Carbide E... from ₹ 442.00
3 Mm -3/4mm SHANK Carbide Endmill 60 HRC 4 Flutes , PACK OF 2 75 MM long is Pack of 1Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.  Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill etc, Plastic Packaging for non-breakable packing 55 HRC AND 60 HRC LOOK SIMILAR BUT THERE IS DIFFRENCE IN QUALITY AND MATERIAL, 60 HRC CAN ALSO BE USED FOR STAINLESS STEEL
3 mm Carbide Endmill
Tabikut 3 mm Carbide Endmill 45 HRC... ₹ 260.00
3 mm Carbide Endmill 45 HRC PACK OF 2Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.  Wine Coating TiALin Coating, Endmill for Better Life and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill etc, Plastic Packaging for non breakable
3mm 3 flute endmill
Tabikut 3mm 3 flute endmill DLC coa... ₹ 325.00
3mm 3 flute endmill DLC coated pack of 13 Flute Carbide Endmills are used for non-ferrous materials and soft materials like aluminum, brass, copper, silver, and gold. These DLC-coated endmills are for longer life on aluminum or sticky material machining.  Advantage of DLC coating is it reduces the friction and make the chip evacuation more smooth and better surface quality  The large core diameter is more stable  Negative rake angel design enhance rigidity of the tool TF25 carbide rod for soft material.  
3mm Carbide Endmill | shoulder mill
Tabikut 3mm Carbide Endmill tabikut... from ₹ 321.00
3mm Carbide Endmill tabikut 55 HRCSolid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.  Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing

GST Input Credit

Get Business Invoice and get 100% GST Input Credit for your Order.

7-Day Return

If you receive defective Product, return it within 7 Days and Get 100% refund.

Lowest Prices

We are offering Products at Lowest Prices in the Industry*.

Highest Quality

We strive to provide best quality product .
Jaibros is a Registered Trademark owned by HAKUNA MATATA RETAIL PRIVATE LIMITED 2009-