Thumbnail for 5 mm Carbide Endmill 65 HRC 4 Flutes PACK OF 1

Thumbnail for 5mm Carbide Endmill 65 HRC

5 mm Carbide Endmill 65 HRC 4 Flutes PACK OF 1

5 mm Carbide Endmill 65 HRC 4 Flutes PACK OF 1

Brand - Tabikut

₹ 991.00

SKU: JBRS2409

Size

Dia 5mm in 5 mm shank 50 long Dia 5 mm in 5 mm shank 75 long Dia 5 mm in 5 mm shank 100 long

0 LEFT IN STOCK

Product description

5 mm Carbide Endmill 65 HRC 4 Flutes PACK OF 1

check 2nd image for dimensions

65HRC carbide endmills are made with a high-quality raw material of 0.005 microns of grain size.

Helix Angel of 35 degrees, Suitable material grades to use on STEEL, STAINLESS STEEL, CAST IRON, AND TITANIUM

4 FLUTES, ALCR TIN COATING, tolerance of diameter is below 30 microns

Products are usually delivered in 3-7 days depending upon your location.

0 have this item in their cart.

Add to cart

Related Product

Tabikut 5mm 3 flute endmill DLC coa... ₹ 454.00

5mm 3 flute endmill DLC coated pack of 13 Flute Carbide Endmills are used for non ferrous material and soft material like aluminum , brass , copper , silver and gold. This DLC coated endmills are for longer life on aluminum or sticky material machining. Advantage of DLC coating is it reduce the friction and make the chip evacuation more smooth and better surface quality The large core diameter is more stable Negative rake angel design enhance rigidity of the tool TF25 carbide rod for soft material.

Tabikut 5mm 50/75 long Carbide Endm... from ₹ 584.00

5mm 50/75 long Carbide Endmill 60 HRC 4 Flutes pack of 1Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing Size of Solid Carbide Cutter 60 HRC: 5 mm

Related Products

Tabikut 5mm 3 flute endmill DLC coa... ₹ 454.00

5mm 3 flute endmill DLC coated pack of 13 Flute Carbide Endmills are used for non ferrous material and soft material like aluminum , brass , copper , silver and gold. This DLC coated endmills are for longer life on aluminum or sticky material machining. Advantage of DLC coating is it reduce the friction and make the chip evacuation more smooth and better surface quality The large core diameter is more stable Negative rake angel design enhance rigidity of the tool TF25 carbide rod for soft material.

Tabikut 5mm 50/75 long Carbide Endm... from ₹ 584.00

5mm 50/75 long Carbide Endmill 60 HRC 4 Flutes pack of 1Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing Size of Solid Carbide Cutter 60 HRC: 5 mm