Thumbnail for 8 mm Carbide ballnose 65 HRC 2 Flutes PACK OF 1

8 mm Carbide ballnose 65 HRC 2 Flutes PACK OF 1

8 mm Carbide ballnose 65 HRC 2 Flutes PACK OF 1

Brand - Tabikut

₹ 1,566.00

SKU: JBRS3186

Size

8mm in 8mm shank 60 long 8 mm in 8 mm shank 75 long 8 mm in 8 mm shank 100 long

0 LEFT IN STOCK

Product description

8 mm Carbide ballnose 65 HRC 2 Flutes PACK OF 1

check 2nd image for dimensions

65HRC carbide endmills are made with a high-quality raw material of 0.005 microns of grain size.

Helix Angel of 35 degree, Suitable material grades to use on STEEL, STAINLESS STEEL, CAST IRON, AND TITANIUM

2 FLUTES, ALCR TIN COATING, tolerance of diameter is below 30 microns

Products are usually delivered in 3-7 days depending upon your location.

0 have this item in their cart.

Add to cart

Related Product

Tabikut 8 mm Carbide Ballnose 60 HR... ₹ 974.00

8 mm Carbide Ballnose 60 HRC PACK OF 1Ballnose are 2 flutes and Endmills are 4 flutes Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing 55 HRC AND 60 HRC LOOK SIMILAR BUT THERE IS DIFFERENCE IN QUALITY AND MATERIAL, 60 HRC CAN ALSO BE USED FOR STAINLESS STEEL

Tabikut 8 Mm Carbide Ballnose 55 HR... from ₹ 632.00

8 mm Carbide Ballnose 55 HRC 2 Flutes, Shank 8 MM Flute Length 16 Mm Total Length Is 60/75/100/150/200 MmSolid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing The flute Length of the Ballnose is double of diameter if the diameter is 1 mm flute length will be 2 mm same for other sizes, if the total length increase flute length remains the same as the double diameter.

Related Products

Tabikut 8 mm Carbide Ballnose 60 HR... ₹ 974.00

8 mm Carbide Ballnose 60 HRC PACK OF 1Ballnose are 2 flutes and Endmills are 4 flutes Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing 55 HRC AND 60 HRC LOOK SIMILAR BUT THERE IS DIFFERENCE IN QUALITY AND MATERIAL, 60 HRC CAN ALSO BE USED FOR STAINLESS STEEL

Tabikut 8 Mm Carbide Ballnose 55 HR... from ₹ 632.00

8 mm Carbide Ballnose 55 HRC 2 Flutes, Shank 8 MM Flute Length 16 Mm Total Length Is 60/75/100/150/200 MmSolid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades. Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing The flute Length of the Ballnose is double of diameter if the diameter is 1 mm flute length will be 2 mm same for other sizes, if the total length increase flute length remains the same as the double diameter.