Thumbnail for BT40 FMB FMC FMA Face Milling Holder

BT40fmb 27 mm Face milling holder arbour

Brand - Mars-Tech

₹ 1,505.00

SKU: JBRS0425

Size

FMB27-60L FMB27-100L FMB27-150L FMB27-200L FMB27-250L FMB27-300L

0 LEFT IN STOCK

Get Rs.50 Off on Prepaid Orders above Rs.500 via Razorpay Gateway. (Discount will be applied During Checkout at Payment Gateway) (No Code Required)

Product description

BT40 facemill holder also called facemill arbour and facemill adaptor

BT40 FMA27 Is mainly used to hold Modular Indexable Cutter with Internal hole of 16 mm any cutter can come with a 27 mm Internal thread but normally 80 mm AND 100 mm Cutters are common in this range.

Made from alloy steel hardened to 54 – 56rc
Balanced to G6.3 at 12,000 rpms
Concentricity is less than .005 micron upto 100 Length and 0.012 upto 200 Length
All critical tool holder surfaces precision ground
Gage length is 50MM,100MM,150MM,200MM,250MM,300MM
Rear thread for pull stud is M16 X 2.0

Products are usually delivered in 3-7 days depending upon your location.

0 have this item in their cart.

Add to cart

Related Product

Mars-Tech 80 Mm Bull Cutter For Die A... ₹ 2,347.00

80 Mm Bull Cutter For Die And Mould Facing Cutter Suitable To RPMT1204 R6 Of Mostly BrandEMRW-6R-80-27-6T suitable for R6 insert This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use any ISO inserts of RPMT1204/RDKW1204/R6 OF mostly brand into this, Recommended Suitable insert for this cutter is TABIKUT Carbide Insert

Mars-Tech BAP400R-80-27-6T Face Milli... ₹ 2,347.00

Dia 80 cutter for APMT1604 insert , facemill cutter 80 mm apmt1604 Shank Holder FMB-27 This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use APMT1604 Of Tabikut Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

Dia80 NNMU2006 & 2007 Face Mill Cutter For Pack of1

Mars-Tech Dia80 NNMU2006 & 2007 Face ... ₹ 8,666.00

NMU2006 AND 2007 Suitable Cutter 80 MM 5 Pocket High Quality.

Mars-Tech 80 mm SNMX1206 Insert Facem... ₹ 6,259.00

80 mm SNMX1206 Insert Facemill in 45 Degree And 88 Degree Suitable To KORLOY BrandSNMX1206 Facemill Cutter, indexable cutter body RM8 series 8 edges insert cutter body for dia 50, 63 and 80 mm in 45 degree and 88 degree This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use SNMX1206 Of Korloy and Tabikut Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

Related Products

Mars-Tech 80 Mm Bull Cutter For Die A... ₹ 2,347.00

80 Mm Bull Cutter For Die And Mould Facing Cutter Suitable To RPMT1204 R6 Of Mostly BrandEMRW-6R-80-27-6T suitable for R6 insert This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use any ISO inserts of RPMT1204/RDKW1204/R6 OF mostly brand into this, Recommended Suitable insert for this cutter is TABIKUT Carbide Insert

Mars-Tech BAP400R-80-27-6T Face Milli... ₹ 2,347.00

Dia 80 cutter for APMT1604 insert , facemill cutter 80 mm apmt1604 Shank Holder FMB-27 This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use APMT1604 Of Tabikut Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

Mars-Tech Dia80 NNMU2006 & 2007 Face ... ₹ 8,666.00

NMU2006 AND 2007 Suitable Cutter 80 MM 5 Pocket High Quality.

Mars-Tech 80 mm SNMX1206 Insert Facem... ₹ 6,259.00

80 mm SNMX1206 Insert Facemill in 45 Degree And 88 Degree Suitable To KORLOY BrandSNMX1206 Facemill Cutter, indexable cutter body RM8 series 8 edges insert cutter body for dia 50, 63 and 80 mm in 45 degree and 88 degree This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use SNMX1206 Of Korloy and Tabikut Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

They are must-haves