BT40 side lock adaptor , SLA 12 ,16,20,25,32,40 mm For Cylindrical Shank pack of 1

₹ 1,250.00

SKU: JBRS2114

Size

SLA12-63L SLA16-63L SLA16-120L SLA20-63L SLA20-120L SLA25-90L SLA25-150L SLA32-100L SLA32-150L SLA40-100L

Thumbnail for BT40 side lock adaptor , SLA 12 ,16,20,25,32,40 mm For Cylindrical Shank pack of 1

BT40 side lock adaptor , SLA 12 ,16,20,25,32,40 mm For Cylindrical Shank pack of 1

Brand - Mars-Tech

₹ 1,250.00

SKU: JBRS2114

Size

SLA12-63L SLA16-63L SLA16-120L SLA20-63L SLA20-120L SLA25-90L SLA25-150L SLA32-100L SLA32-150L SLA40-100L

0 LEFT IN STOCK

Get Rs.50 Off on Prepaid Orders above Rs.500 via Razorpay Gateway. (Discount will be applied During Checkout at Payment Gateway) (No Code Required)

Product description

BT40 SLA holder also called SIDE LOCK HOLDER

BT40 SIDE LOCK Is mainly used to hold Cylendrical/Straight Shank of anything like Indexable Cutter , Baby chuck , Carbide Drill whatever with straight shank can hold into for better rigidity and strength it range from 16 mm to 40 mm as small diameter of shank can be hold in standard collet chuck.

Made from alloy steel hardened to 54 – 56rc
Balanced to G6.3 at 12,000 rpms
Concentricity is less than .005 micron upto 100 Length and 0.012 upto 200 Length
All critical tool holder surfaces precision ground
Gage length is 50MM,100MM,150MM
Rear thread for pull stud is M16 X 2.0

Products are usually delivered in 3-7 days depending upon your location.

0 have this item in their cart.

Add to cart

Related Product

Mars-Tech BT40 Pull Stud In Various D... from ₹ 110.00

BT40 Pull stud used in CNC machines for BT40 holders ISO standard name is MAS403 Pull studs are an important link between machine and tool. The requirements concerning accuracy, rigidity and reliability are very high. Pull studs of minor quality not only decrease the performance of the machine, they are even a safety risk. A breaking pull stud might cause severe damage on machine and workpiece and even injuries on persons. made of special steel for higher rigidity proper heat treated ,

Mars-Tech 25 mm Indexable Endmill Sha... from ₹ 950.00

This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use any ISO inserts of APMT1604 into this Different Lengths and Different Shank sizes please choose before adding to the cart

Mars-Tech 25 mm Indexable Inserted En... from ₹ 1,000.00

This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC not to wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use any ISO inserts of APMT1135 into this Different Lengths and Different Shank sizes please choose before adding to the cart