ER 11 COLLET DIN6499B AA 0.010 MICRON High Quality Precision Collet.

₹ 300.00

SKU: JBRS0589

Size

1-0.5 MM 1.5-1.0MM 2.0-1.5MM 2.5-2.0MM 3-2.5MM 3.175MM 3.5-3.0MM 4-3.5MM 4.5-4MM 5-4.5MM 5.5-5MM 6-5.5MM 6.5-6MM 7-6.5MM

ER 11 COLLET DIN6499B AA 0.010 MICRON High Quality Precision Collet.

Brand - Mars-Tech

₹ 300.00

SKU: JBRS0589

Size

1-0.5 MM 1.5-1.0MM 2.0-1.5MM 2.5-2.0MM 3-2.5MM 3.175MM 3.5-3.0MM 4-3.5MM 4.5-4MM 5-4.5MM 5.5-5MM 6-5.5MM 6.5-6MM 7-6.5MM

0 LEFT IN STOCK

Get Rs.50 Off on Prepaid Orders above Rs.500 via Razorpay Gateway. (Discount will be applied During Checkout at Payment Gateway) (No Code Required)

Product description

The standard ER collet is the most widely used clamping system in the world.
Made from Alloy spring steel and fully hardened these ER collets are ideal for many machining applications including boring, milling, reaming, tapping and grinding. Unless specified differently all of our ER collets feature runout of 0.010 micron or less. ,ER collet sizes start at ER8 through ER50.

ER11 series collets have a capacity of 1mm-7mm. Each ER11 collet has a range of (0.5mm). The size indicated on the collet is the largest size it can hold and can be collapsed smaller within its collapse range of (0.5mm). For example, ER11-3mm can grab a round shank from 3mm diameter to 2.5mm diameter.

Products are usually delivered in 3-7 days depending upon your location.

0 have this item in their cart.

Add to cart

Related Product

Mars-Tech Collet Chuck ER11 A/M type ... from ₹ 800.00

Cylindrical Shank / Straight Shank Collet chuck also called Baby collet chuck because of small size and same chuck which comes in BT40 or big tapers , its very useful to increase length of a chuck and also used in turning machine where you have turret sleeve size smaller but straight, its also useful to OEM of machines like Multi Spindle machine and it comes in various sizes to fit in , from Smallest 8 mm to 40 mm are commonly available. This is made from high quality steel and hardened upto 50 hrc for long lasting life ER11 COLLET RANGE FROM 1MM TO 7 MM STANDARD IN VARIATION OF 0.5 MM

Mars-Tech Mars-Tech ER Nuts ER16 A AN... ₹ 150.00

BOTH type nut hold all ER16 collets from 1 mm to 12 mmMade from alloy steel hardened to 54 – 56rcPrecision ground ID thread and taperER16A Has an id thread of – M22*1.5PER16A Outside diameter is 28 MMNormal key to tighteninginternal cam removes collet when unscrewedMARSTECH CODE IS ER16A HEX TYPE NUT ER16M Collet Nut has an id thread of 19mm X 1.0 pitchER16M Outside diameter is .866 inches (22mm)Outside has castle notches for tighteningER16M Wrench works on this collet nut

Mars-Tech BT40 ER11A Collet chuck-70L... from ₹ 1,250.00

BT40 Tool Holder accepts all ER11 colletsThread inside internal stop screwMade from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micronAll critical tool holder surfaces precision groundCoolant through capabilityGage length is 70mm Rear thread for pull stud is M16 X 2.0 All holders have capability to become through coolant by simply removing screw in the center by allen key