Thumbnail for SOMT12T3 Indexable Cutter dia 50

50 mm SOMT12T3 Indexable Cutter dia 50 mm suitable to Mitsubishi Insert pack of 1

Brand - Mars-Tech

₹ 2,000.00

SKU: JBRS0194

NONE LEFT IN STOCK

Get Rs.50 Off on Prepaid Orders above Rs.500 via Razorpay Gateway. (Discount will be applied During Checkout at Payment Gateway) (No Code Required)

Product description

SOMT12T3 ASX400-050-A04R DIA 50 CUTTER BODY SUITABLE TO MITSUBISHI

SOMT12T3 ASX400-063-A05R DIA 63 MILLING CUTTER INDEXABLE

SOMT12T3 ASX400-080-A06R DIA 80 FACE MILLING CUTTER

This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use SOMT12T3 Of Mitsubishi and Tabikut Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

Products are usually delivered in 3-7 days depending upon your location.

0 have this item in their cart.

Related Product

Ultra Precision Screw 4mm x 10mm long Pack of 10 nos.

Mars-Tech Ultra Precision Screw 4mm x... ₹ 250.00

These are best ultra precision screw of MARS-TECH compare to any brand in the market

Mars-Tech Mars-Tech Torx Key T15 high... ₹ 350.00

T15 hardened torx key t type style small size. This key can be used for T15 size of screw mostly screw used for this size are M3.5 , M4 Quantity 1 means 10 pcs

Mars-Tech BT40 fmb 22 mm Face milling... from ₹ 1,250.00

BT40 facemill holder also called facemill arbour and facemill adaptor BT40 FMA22 Is mainly used to hold Modular Indexable Cutter with Internal hole of 16 mm any cutter can come with a 22 mm Internal thread but normally 50 mm AND 63 mm Cutters are common in this range. Made from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundGage length is 50MM,100MM,150MM,200MM,250MM,300MMRear thread for pull stud is M16 X 2.0