Thumbnail for BT40 ER COLLET CHUCK ER16A

BT40ER16 collet chuck-70L,100L,150L,200L

Brand - Mars-Tech

₹ 1,505.00

SKU: JBRS0389

Size

BT40 ER16A-70L BT40 ER16A-100L BT40 ER16A-150L BT40 ER16A-200L BT40 ER16M-70L BT40 ER16M-100L BT40 ER16M-150L

0 LEFT IN STOCK

Product description

BT40 Tool Holder accepts all ER16 collets

ER16 Collets range from 1 mm to 12 mm
Thread inside internal stop screw
Made from alloy steel hardened to 54 – 56rc
Balanced to G6.3 at 12,000 rpms
Concentricity is less than .005 micron upto 100 Length and 0.012 upto 200 Length
All critical tool holder surfaces precision ground
Coolant through capability
Gage length is 70mm,100MM,150MM,200MM

Rear thread for pull stud is M16 X 2.0

All holders have capability to become through coolant by simply removing screw in the center by allen key

Products are usually delivered in 3-7 days depending upon your location.

0 have this item in their cart.

Add to cart

Related Product

Mars-Tech ER 16 COLLET DIN6499B AA 0.... from ₹ 241.00

The standard ER collet is the most widely used clamping system in the world.Made from Alloy spring steel and fully hardened these ER collets are ideal for many machining applications including boring, milling, reaming, tapping and grinding. Unless specified differently all of our ER collets feature runout of 0.010 micron or less. ,ER collet sizes start at ER8 through ER50. ER16 series collets have a capacity of 1mm-12mm. Each ER16 collet has a range of (1 mm). The size indicated on the collet is the largest size it can hold and can be collapsed smaller within its collapse range of (0.9mm). For example, ER16-3mm can grab a round shank from 3mm diameter to 2.1mm diameter.

ER16 Collet Ultra high precision 0.005 AAA quality

Mars-Tech ER16 Collet Ultra high prec... from ₹ 566.00

The standard ER collet is the most widely used clamping system in the world.Made from Alloy spring steel and fully hardened these ER collets are ideal for many machining applications including boring, milling, reaming, tapping and grinding. Unless specified differently all of our ER collets feature runout of 0.005 micron or less. ,ER collet sizes start at ER8 through ER50. ER16 series collets have a capacity of 1mm-12mm. Each ER16 collet has a range of (1 mm). The size indicated on the collet is the largest size it can hold and can be collapsed smaller within its collapse range of (0.9mm). For example, ER16-3mm can grab a round shank from 3mm diameter to 2.1mm diameter.

Mars-Tech Er16 Spanner M Type Green H... ₹ 255.00

ER16M/A/UM Wrench is made from high quality alloy steel ,Thick material allows high torque without bending,5 point contact ensures no distortion of collet nut while tightening,ER16 Wrench works on all of our M Type and A type collet chucks that take ER16 collets

Mars-Tech Mars-Tech ER Nuts ER16 A AN... from ₹ 210.00

BOTH type nut hold all ER16 collets from 1 mm to 12 mmMade from alloy steel hardened to 54 – 56rcPrecision ground ID thread and taperER16A Has an id thread of – M22*1.5PER16A Outside diameter is 28 MMNormal key to tighteninginternal cam removes collet when unscrewedMARSTECH CODE IS ER16A HEX TYPE NUT ER16M Collet Nut has an id thread of 19mm X 1.0 pitchER16M Outside diameter is .866 inches (22mm)Outside has castle notches for tighteningER16M Wrench works on this collet nut

Related Products

Mars-Tech ER 16 COLLET DIN6499B AA 0.... from ₹ 241.00

The standard ER collet is the most widely used clamping system in the world.Made from Alloy spring steel and fully hardened these ER collets are ideal for many machining applications including boring, milling, reaming, tapping and grinding. Unless specified differently all of our ER collets feature runout of 0.010 micron or less. ,ER collet sizes start at ER8 through ER50. ER16 series collets have a capacity of 1mm-12mm. Each ER16 collet has a range of (1 mm). The size indicated on the collet is the largest size it can hold and can be collapsed smaller within its collapse range of (0.9mm). For example, ER16-3mm can grab a round shank from 3mm diameter to 2.1mm diameter.

Mars-Tech ER16 Collet Ultra high prec... from ₹ 566.00

The standard ER collet is the most widely used clamping system in the world.Made from Alloy spring steel and fully hardened these ER collets are ideal for many machining applications including boring, milling, reaming, tapping and grinding. Unless specified differently all of our ER collets feature runout of 0.005 micron or less. ,ER collet sizes start at ER8 through ER50. ER16 series collets have a capacity of 1mm-12mm. Each ER16 collet has a range of (1 mm). The size indicated on the collet is the largest size it can hold and can be collapsed smaller within its collapse range of (0.9mm). For example, ER16-3mm can grab a round shank from 3mm diameter to 2.1mm diameter.

Mars-Tech Er16 Spanner M Type Green H... ₹ 255.00

ER16M/A/UM Wrench is made from high quality alloy steel ,Thick material allows high torque without bending,5 point contact ensures no distortion of collet nut while tightening,ER16 Wrench works on all of our M Type and A type collet chucks that take ER16 collets

Mars-Tech Mars-Tech ER Nuts ER16 A AN... from ₹ 210.00

BOTH type nut hold all ER16 collets from 1 mm to 12 mmMade from alloy steel hardened to 54 – 56rcPrecision ground ID thread and taperER16A Has an id thread of – M22*1.5PER16A Outside diameter is 28 MMNormal key to tighteninginternal cam removes collet when unscrewedMARSTECH CODE IS ER16A HEX TYPE NUT ER16M Collet Nut has an id thread of 19mm X 1.0 pitchER16M Outside diameter is .866 inches (22mm)Outside has castle notches for tighteningER16M Wrench works on this collet nut