Thumbnail for BT40 fmb 60 mm FLANGE TYPE Face milling holder arbour

BT40 fmb 60 mm FLANGE TYPE Face milling holder arbour

BT40 fmb 60 mm FLANGE TYPE Face milling holder arbour

Brand - Mars-Tech

₹ 10,620.00

SKU: JBRS3613

0 LEFT IN STOCK

Product description

BT40 facemill holder also called facemill arbour and facemill adaptor

BT40 FMA60 Is mainly used to hold Modular Indexable Cutter with Internal hole of 16 mm any cutter can come with a 60mm Internal thread but normally 200 mm Cutters with 4 pcd holes are common in this range.

Made from alloy steel hardened to 54 – 56rc
Balanced to G6.3 at 15,000 rpms
Concentricity is less than .005 micron upto 100 Length and 0.012 upto 200 Length
All critical tool holder surfaces precision ground
Gage length is 100MM,
Rear thread for pull stud is M16 X 2.0

Products are usually delivered in 3-7 days depending upon your location.

0 have this item in their cart.

Related Product

Mars-Tech 200 mm APMT16 cutter ₹ 13,541.00

200 mm cutter suitable to APMT1604 60 mm flange type hole with 4 pcd holes

Mars-Tech 200 MM Milling Indexable Mi... ₹ 13,541.00

This 200 mm Cutter is for face milling Facemill holder used in this cutter is PCD type This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use any ISO inserts of RPMT1204/RDKW1204/R6 OF mostly brand into this. Recommended Suitable insert for this cutter is TABIKUT Carbide Insert

Related Products

Mars-Tech 200 mm APMT16 cutter ₹ 13,541.00

200 mm cutter suitable to APMT1604 60 mm flange type hole with 4 pcd holes

Mars-Tech 200 MM Milling Indexable Mi... ₹ 13,541.00

This 200 mm Cutter is for face milling Facemill holder used in this cutter is PCD type This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use any ISO inserts of RPMT1204/RDKW1204/R6 OF mostly brand into this. Recommended Suitable insert for this cutter is TABIKUT Carbide Insert