Thumbnail for BT40 FMB FMC FMA Face milling holder

BT40 fma16 mm face milling holder arbour

Brand - Mars-Tech

₹ 1,745.00

SKU: JBRS0414

Size

FMA16-60L FMA16-100L FMA16-150L FMA16-200L FMA16-250L FMA16-300L

0 LEFT IN STOCK

Product description

BT40 fma16 mm face milling holder arbour

BT40 face mill holder also called face mill arbour and face mill adaptor

BT40 FMA16 Is mainly used to hold Modular Indexable Cutter with an Internal hole of 16 mm any cutter can come with a 16 mm Internal thread but normally 40 mm Cutters are common in this range.

Made from alloy steel hardened to 54 – 56rc
Balanced to G6.3 at 12,000 rpms
Concentricity is less than .005 micron upto 100 Length and 0.012 upto 200 Length
All critical tool holder surfaces precision ground
Gage length is 70mm,100MM,150MM,200MM,250MM,300MM
The rear thread for the pull stud is M16 X 2.0

Products are usually delivered in 3-7 days depending upon your location.

0 have this item in their cart.

Add to cart

Related Product

Mars-Tech BAP300R-40-16/22-4T Face Mi... from ₹ 1,475.00

BAP300R-40-16/22-4T Face Milling Cutter Dia 40 Modular APMT1135 Insert CutterThis is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use APMT1135 Of Tabikut Brand Insert into this If any other brand has same insert it can also be fixed to this. there are many Chinese brands also making the same inserts so you can just check the description of the size from other brands to fix this insert. HAVE A CLEAR VIEW OF PRODUCT IN BELOW VIDEO

Mars-Tech BAP400R-40-16/22-4T Face Mi... from ₹ 1,444.00

BAP400R-40-16/22-4T Face Milling Cutter Dia 40 Modular APMT1604 Insert CutterDia 40 cutter for APMT1604 insert , facemill cutter 40 mm apmt1604 Shank Holder FMB-22 This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use APMT1604 Of Tabikut Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert. HAVE A CLEAR VIEW ON VIDEO BELOW

Mars-Tech BT40 locking device Tool Bo... ₹ 2,227.00

BT40 Locking device with Vertical and Horizontal mode to tighten Nut and Pull stud made of Steel and long life. cone for taper is made of aluminium . 3.5 kgs of 1 pc.

Mars-Tech BT40 Pull Stud In Various D... from ₹ 132.00

BT40 Pull stud used in CNC machines for BT40 holders ISO standard name is MAS403 Pull studs are an important link between machine and tool. The requirements concerning accuracy, rigidity and reliability are very high. Pull studs of minor quality not only decrease the performance of the machine, they are even a safety risk. A breaking pull stud might cause severe damage on machine and workpiece and even injuries on persons. made of special steel for higher rigidity proper heat treated ,

Sign up for restock notifications!

Notify Me when this Product get back in Stock

Related Products

Mars-Tech BAP300R-40-16/22-4T Face Mi... from ₹ 1,475.00

BAP300R-40-16/22-4T Face Milling Cutter Dia 40 Modular APMT1135 Insert CutterThis is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use APMT1135 Of Tabikut Brand Insert into this If any other brand has same insert it can also be fixed to this. there are many Chinese brands also making the same inserts so you can just check the description of the size from other brands to fix this insert. HAVE A CLEAR VIEW OF PRODUCT IN BELOW VIDEO

Mars-Tech BAP400R-40-16/22-4T Face Mi... from ₹ 1,444.00

BAP400R-40-16/22-4T Face Milling Cutter Dia 40 Modular APMT1604 Insert CutterDia 40 cutter for APMT1604 insert , facemill cutter 40 mm apmt1604 Shank Holder FMB-22 This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use APMT1604 Of Tabikut Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert. HAVE A CLEAR VIEW ON VIDEO BELOW

Mars-Tech BT40 locking device Tool Bo... ₹ 2,227.00

BT40 Locking device with Vertical and Horizontal mode to tighten Nut and Pull stud made of Steel and long life. cone for taper is made of aluminium . 3.5 kgs of 1 pc.

Mars-Tech BT40 Pull Stud In Various D... from ₹ 132.00

BT40 Pull stud used in CNC machines for BT40 holders ISO standard name is MAS403 Pull studs are an important link between machine and tool. The requirements concerning accuracy, rigidity and reliability are very high. Pull studs of minor quality not only decrease the performance of the machine, they are even a safety risk. A breaking pull stud might cause severe damage on machine and workpiece and even injuries on persons. made of special steel for higher rigidity proper heat treated ,