Endmill (Inserted)

Mars-Tech Indexable Inserted Endmill ... ₹ 1,444.00

This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use JDMT1003 from Hitachi Brand Insert into this , If any other brand have same insert it can also fixed to this.

Mars-Tech SOMT12T3 Indexable Cutter D... ₹ 2,407.00

SOMT12T3 ASX400-063-A05R DIA 63 MILLING CUTTER INDEXABLE SOMT12T3 ASX400-080-A06R DIA 80 FACE MILLING CUTTER This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use SOMT12T3 Of Mitsubishi and Tabikut Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

Mars-Tech SDMT1204 Milling Cutter Dia... ₹ 4,514.00

SDMT1204 WIDIA milling cutter body dia 100 6 pockets 32 mm hole. This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use SDMT1204 Of WIDIA and Tabikut Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

Mars-Tech R290 Milling Cutter of Dia ... from ₹ 1,866.00

Indexable Cutter suitable to R290 Milling insert 12T3 with 4 edges and square. R290 is a sandvik brand insert any other brand with similar size will also fit to this.

Mars-Tech Indexable Inserted Endmill ... ₹ 963.00

R390-016A18-11M This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use R390-11T3 For Sandvik Brand Insert into this , If any other brand have same insert it can also fixed to this.

Mars-Tech Indexable Inserted Endmill ... ₹ 1,444.00

This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use AOMT123608 For Mitsubishi Brand Insert into this , If any other brand have same insert it can also fixed to this.

Mars-Tech 20 mm Indexable Inserted En... ₹ 1,444.00

This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use JDMT1003 from Hitachi Brand Insert into this , If any other brand have same insert it can also fixed to this.

Sold out

Mars-Tech 80 mm SOMT12T3 Indexable Cu... ₹ 3,370.00

80 mm SOMT12T3 Indexable Cutter Dia 80 Mm Suitable To Mitsubishi InsertSOMT12T3 ASX400-050-A04R DIA 50 CUTTER BODY SUITABLE FOR MITSUBISHI SOMT12T3 ASX400-063-A05R DIA 63 MILLING CUTTER INDEXABLE SOMT12T3 ASX400-080-A06R DIA 80 FACE MILLING CUTTER This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by center to center and they have center hole both sides, you can use SOMT12T3 Of Mitsubishi and Tabikut Brand Insert into this, If any other brand have same insert it can also fixed to this. there are many Chinese brands also making the same inserts so you can just check descriptions of sizes from other brands to fix this insert.

Sold out

Mars-Tech BDMT11T3 Indexable Inserted... from ₹ 1,204.00

BDMT11T3 Indexable Inserted Endmill Dia 16,20,25 mm in 200 Length for Kyocera BrandThis is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by center to center and they have center hole both sides, you can use BDMT11T3 For Kyocera Brand Insert into this, If any other brand have same insert it can also fixed to this.

Indexable Inserted Endmill Dia 25 & 32 Mm

Mars-Tech Indexable Inserted Endmill ... from ₹ 2,227.00

XK01.09Z25.025.02 , XK01.09Z32.032.02 This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use SDMT09T3 From ZCCCT Brand Insert into this , If any other brand have same insert it can also fixed to this.

Mars-Tech Indexable Inserted Endmill ... from ₹ 1,866.00

R390-025A25-17M,R390-032A32-17M This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use R390-1704 For Sandvik Brand Insert into this , If any other brand have same insert it can also fixed to this.

Mars-Tech 16 mm ZCMT10 Insert cutter ... ₹ 1,444.00

16 mm ZCMT10 Insert cutter 200 mm long pack of 1SICL 1610S16-2N-150L SICL 2010S20-2N-200L SICL 2510S25-3N-200L This is a Shoulder & Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, this cutter is suitable to ZCMT1003 from DIJET brand. If any other brand has the same insert you can use it for this cutter.

Mars-Tech 200 mm APMT16 cutter ₹ 13,541.00

200 mm cutter suitable to APMT1604 60 mm flange type hole with 4 pcd holes

Mars-Tech Indexable Inserted Endmill ... ₹ 1,733.00

This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use AOMT123608 For Mitsubishi Brand Insert into this , If any other brand have same insert it can also fixed to this.

Mars-Tech 25mm aomt184808 2 Pocket Mi... ₹ 1,866.00

25mm aomt184808 2 Pocket Mitsubishi Insert pack of 1This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS and changing of insert time is also very low, They are hardened 45-50 HRC not to wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by center to center and they have center hole both sides, you can use AOMT184808 For Mitsubishi Brand Insert into this , If any other brand have same insert it can also fixed to this.

Mars-Tech 20 mm ZCMT10 Insert cutter ... ₹ 1,805.00

NOTE: 16mm has 2 pockets. Product Description SICL 1610S16-2N-150L SICL 2010S20-2N-200L SICL 2510S25-3N-200L This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, this cutter is suitable to ZCMT1003 from DIJET brand. If any other brand has the same insert you can use it for this cutter.

Mars-Tech Indexable Inserted Endmill ... from ₹ 1,805.00

This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use BDMT1704 For Kyocera Brand Insert into this , If any other brand have same insert it can also fixed to this.

APKT1705 cutter Indexable Inserted Endmill Dia 32 Mm Shank

Mars-Tech APKT1705 cutter Indexable I... ₹ 2,467.00

APKT1705 cutter Indexable Inserted Endmill Dia 32 Mm Shank 32 Mm 3 Pocket Suitable To APKT1705 For Taegu Tec InsertThis is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use APKT1705 For Taegu Tec Brand Insert into this , If any other brand have same insert it can also fixed to this.

Sold out

Mars-Tech Indexable Inserted Endmill ... ₹ 1,805.00

This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use APKT1705 For Taegu Tec Brand Insert into this , If any other brand have same insert it can also fixed to this.

Mars-Tech Indexable Inserted Endmill ... ₹ 1,805.00

This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use JDMT1505 from Hitachi Brand Insert into this , If any other brand have same insert it can also fixed to this.

Get Extra 1% Discount on Jaibros App only

Find anything you need

GST Input Credit

7-Day Return

Lowest Prices

Highest Quality