BT40Morse taper holder MT1 MT2 MT3 MT4

₹ 1,505.00
SKU: JBRS0437

Size

MT1-45L MT2-60L MT3-75L MT4-95L
Thumbnail for BT40 Morse Taper Adaptor MT Holder Thumbnail for BT40 Morse Taper Adaptor MT Holder Thumbnail for BT40 Morse Taper Adaptor MT Holder Thumbnail for BT40 Morse Taper Adaptor MT Holder Thumbnail for BT40 Morse Taper Adaptor MT Holder Thumbnail for BT40 Morse Taper Adaptor MT Holder Thumbnail for BT40 Morse Taper Adaptor MT Holder Thumbnail for BT40 Morse Taper Adaptor MT Holder
BT40 Morse Taper Adaptor MT Holder
BT40 Morse Taper Adaptor MT Holder
BT40 Morse Taper Adaptor MT Holder
BT40 Morse Taper Adaptor MT Holder
BT40 Morse Taper Adaptor MT Holder
BT40 Morse Taper Adaptor MT Holder
BT40 Morse Taper Adaptor MT Holder
BT40 Morse Taper Adaptor MT Holder

BT40Morse taper holder MT1 MT2 MT3 MT4

Brand - Mars-Tech
₹ 1,505.00
SKU: JBRS0437

Size

MT1-45L MT2-60L MT3-75L MT4-95L
0 LEFT IN STOCK
Product description

BT40 Morse Taper holder are used to hold Tang type shanks 

BT40 morse taper Is mainly used to hold Tang Type Drills and Arbours  

  • Better shank taper - accurate, rigid toolholder-to-spindle mount
  • Less tool wear and replacement - less scrap
  • Fully ground flange and V-groove, easy on the tool changers for less spindle and changer maintenance

Made from alloy steel hardened to 54 – 56rc
Balanced to G6.3 at 12,000 rpms
Concentricity is less than .005 micron upto 100 Length and 0.012 upto 200 Length
All critical tool holder surfaces precision ground
Rear thread for pull stud is M16 X 2.0

 

This is general standard to choose morse taper size for drills (it may change with different din standard or special sizes) 


MT 1 IS USED FOR SMALL DRILL UPTO 14MM
MT 2 IS USED FOR 14.25 MM TO 23 MM
MT 3 IS USED FOR 23.5 TO 31.5 MM
MT4 IS USED FOR 32TO 49.5MM3

Products are usually delivered in 3-7 days depending upon your location.
0 have this item in their cart.
Add to cart

Related Product

BT40 locking device
Mars-Tech BT40 locking device Tool Bo... ₹ 2,227.00
BT40 Locking device with Vertical and Horizontal mode to tighten Nut and Pull stud made of Steel and long life. cone for taper is made of aluminium . 3.5 kgs of 1 pc.
BT40 Pull Stud
Mars-Tech BT40 Pull Stud In Various D... from ₹ 132.00
BT40 Pull stud used in CNC machines for BT40 holders ISO standard name is MAS403 Pull studs are an important link between machine and tool. The requirements concerning accuracy, rigidity and reliability are very high. Pull studs of minor quality not only decrease the performance of the machine, they are even a safety risk. A breaking pull stud might cause severe damage on machine and workpiece and even injuries on persons. made of special steel for higher rigidity proper heat treated ,
BT40 to ISO40 Adapter
Mars-Tech BT40 to ISO40 Adapter ₹ 481.00
The BT40 to ISO40 Adapter allows the machinist to use the same CNC holder in a conventional ISO40 machine by simply changing the retention knob/pull stud for this cheap but effective adapter. So instead of buying a new holder, you just purchase the OTT retention knob/pull stud and exchange the pull stud to convert the holder from BT40 to a standard SK holder for a conventional machine. REAR THREAD M16X2  

Add to cart

Related Products

BT40 locking device
Mars-Tech BT40 locking device Tool Bo... ₹ 2,227.00
BT40 Locking device with Vertical and Horizontal mode to tighten Nut and Pull stud made of Steel and long life. cone for taper is made of aluminium . 3.5 kgs of 1 pc.
BT40 Pull Stud
Mars-Tech BT40 Pull Stud In Various D... from ₹ 132.00
BT40 Pull stud used in CNC machines for BT40 holders ISO standard name is MAS403 Pull studs are an important link between machine and tool. The requirements concerning accuracy, rigidity and reliability are very high. Pull studs of minor quality not only decrease the performance of the machine, they are even a safety risk. A breaking pull stud might cause severe damage on machine and workpiece and even injuries on persons. made of special steel for higher rigidity proper heat treated ,
BT40 to ISO40 Adapter
Mars-Tech BT40 to ISO40 Adapter ₹ 481.00
The BT40 to ISO40 Adapter allows the machinist to use the same CNC holder in a conventional ISO40 machine by simply changing the retention knob/pull stud for this cheap but effective adapter. So instead of buying a new holder, you just purchase the OTT retention knob/pull stud and exchange the pull stud to convert the holder from BT40 to a standard SK holder for a conventional machine. REAR THREAD M16X2  
They are must-haves

Check out these awesome collections!

Turning Inserts

VIEW ALL
TNMG160404/08/12 CQ 4509 Chipbreaker Insert Steel Grade Of Tabikut Pack Of 10 ₹ 1,204.00
TCMT16T304/08 t20 Tabikut insert PACK OF 10 ₹ 1,345.00
TNMG160408/12 cq125 For Steel Stainless Steel Mild Steel Pack Of 10 ₹ 1,322.00
VNMG160404/08 TM 4509 pack of 10 ₹ 1,593.00

Milling Inserts

VIEW ALL
zccct apmt1135 pdr ybg202/205 pack of 10 ₹ 885.00
APMT1135 T15 Carbide Insert Tabikut pack of 10 ₹ 885.00
zccct APMT1604 Carbide Insert ybg 202/205 pack of 10 ₹ 1,121.00
ZCCCT R6 Carbide Insert RDKW1204 ybg202/205 pack of 10 ₹ 1,050.00

Indexable Cutters

VIEW ALL

GST Input Credit

Get Business Invoice and get 100% GST Input Credit for your Order.

7-Day Return

If you receive defective Product, return it within 7 Days and Get 100% refund.

Lowest Prices

We are offering Products at Lowest Prices in the Industry*.

Highest Quality

We strive to provide best quality product .
Jaibros is a Registered Trademark owned by HAKUNA MATATA RETAIL PRIVATE LIMITED 2009-