Mars-Tech

Mars-Tech Turning Holder tnmg MTJNR/L... from ₹ 933.00

Turning Holder MTJNL/R2525 M16 Suitable to TNMG160404/04/08/12 Insert. Spare set remain same for right left 2020 shank 2525 shank Black Color , High Quality , Left Hand. Suitable Insert TNMG160408 Try Tabikut Turning Insert.

Mars-Tech APU13 Spanner For Keyless D... ₹ 300.00

APU 13 Spanner for Keyless Drill Chuck. Suitable to Only 2 Sizes 1-13 MM And 3-16MM

Mars-Tech Torx Screw 2 Mm 5mm Long T6... ₹ 106.00

Hardened Star Torx Screw for Milling Cutters offered are screws that come with precision design and constructed standards ,These torx screw are hardened upto 50-55 hrc for wear resistance, These Torx screw are mainly used in indexable tools as Boring bar , Insert cutter , milling cutter ,They are precise screw for better grip of carbide insert with pocket

Mars-Tech Chamfer Cutter 45 Degree 5-... ₹ 1,384.00

Chamfer cutter for 45 degree suitable to TCMT11 insert CHAMFER CUTTER AFM45-TC11-C16-Z1-DIA 5 TO 16 A chamfer mill, or a chamfer cutter useful for many purposes a drill slop , remove burrs from drill hole , 45 degree angel needed for any machining requirement.

3mm tdc tdt tdj Grooving Taegutec Insert 3 mm Left/Right pack of 1

Mars-Tech 3mm tdc tdt tdj Grooving Ta... from ₹ 944.00

3mm tdc Grooving Holder suitable to Taegutec Insert 3 mm Left/Right HANDGrooving holders are used for parting and grooving in the turning machine. 3 mm grooving holder suitable to taegutech profile of insert it can fit to any insert naming TDC TDJ TDT 3 mm T max is the maximum grooving capacity of the holder if the grooving capacity is 19 mm it means it can part 38 mm of the round bar maximum.

Mars-Tech ER25 Spanner M Type C Type ... from ₹ 217.00

ER25M/A/UM Spanner Wrench is made from high quality alloy steel ,Thick material allows high torque without bending,4 point contact ensures no distortion of collet nut while tightening,ER25 Wrench works on all of our M Type and UM type collet chucks that take ER25 collets

Mars-Tech Torx Screw 4.5 mm T20 ( Pac... from ₹ 353.00

Hardened Star Torx Screw for Milling Cutters offered are screws that come with precision design and constructed standards ,These torx screw are hardened upto 50-55 hrc for wear resistance, These Torx screw are mainly used in indexable tools as Boring bar , Insert cutter , milling cutter ,They are precise screw for better grip of carbide insert with pocket Screw 4.5 mm Comes in different lengths so Choose length before adding to Cart

Mars-Tech 8/10/12/14 mm cutter suitab... from ₹ 1,805.00

8/10/12 mm cutter is suitable for JDMT07 Hitachi Brand Insert.ESE-C10-10-100L-2T SCREW 1.8X4 MM T6 KEY ESE-C12-12-120L-2T SCREW 1.8X4 MM T6 KEY ESE-C14-14-150L-3T SCREW 1.8X4 MM T6 KEY This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use JDMT070204 For HITACHI Brand Insert into this If any other brand have same insert can also fix to this cutter body

Mars-Tech Mars-Tech Torx Key T8 high ... ₹ 413.00

T8 hardened torx key t type style small size. This key can be used for T8 size of screw mostly screw used for this size are M2.5 , M3 Quantity 1 means 10 pcs

ER16 Spanner M Type A Type UM Type pack of 1

Mars-Tech ER16 Spanner M Type A Type ... from ₹ 181.00

ER16M/A/UM Wrench is made from high quality alloy steel ,Thick material allows high torque without bending,5 point contact ensures no distortion of collet nut while tightening,ER16 Wrench works on all of our M Type and A type collet chucks that take ER16 collets

Mars-Tech ER25 Nut UM And M Type pack of 1

Mars-Tech Mars-Tech ER25 Nut UM And M... from ₹ 229.00

Both Type Holds all ER25 collets from 1 mm to 16 mmMade from alloy steel hardened to 54 – 56rcPrecision ground ID thread and taperHas an id thread of – M32*1.5POutside diameter is 42 MMSUITABLE SPANNER IS ER25UM AND ER25 C TYPE key to tighteninginternal cam removes collet when unscrewedMARSTECH CODE IS ER25UM TYPE NUT M TYPE Has an id thread of 30mm X 1.0 pitchOutside diameter is 1.377 inches (35mm)Length is .787 inches (20mm)ER25M-Wrench works on this collet nut UM type EXTRA LONG Has an id thread of – M32*1.5POutside diameter is 42 MM Length is .984 inches (25mm)

Mars-Tech EMR-C25-5R25- 25 Mm Bullnos... from ₹ 963.00

EMRT-C25-5R25-150/200/250 This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of RPMW10T3/RPKT103/R5 OF mostly brand into this , please note this is not for 1003 , 10T3 Thickness is 3.87 mm and RPMW1003 thickness is 3.18 mm and 10T3 have design on it.

Mars-Tech Er25 Spanner Um Type High Q... ₹ 310.00

ER25UM Spanner Wrench is made from high quality alloy steel ,Thick material allows high torque without bending,4 point contact ensures no distortion of collet nut while tightening,ER25 Wrench works on UM type collet chucks that take ER25 collets

16 mm cutter LNMU0303 - 150 And 200 Long Suitable To LNMU0303 Inserts pack of 1

Mars-Tech 16 mm cutter LNMU0303 - 150... ₹ 1,926.00

EXN03-C16-16-150L-2T , EXN03-C16-16-200L-2T This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use LNMU0303 Tungaloy Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

Torx Key T15 Handle type high quality pack of 2

Mars-Tech Torx Key T15 Handle type ... ₹ 236.00

T15 hardened torx key handle type This key can be used for T15 size of screw mostly screw used for this size are M3.5 , M4 Quantity 1 means 2 pc

Mars-Tech BT40Morse taper holder MT1 ... from ₹ 1,505.00

BT40 Morse Taper holder are used to hold Tang type shanks BT40 morse taper Is mainly used to hold Tang Type Drills and Arbours Better shank taper - accurate, rigid toolholder-to-spindle mount Less tool wear and replacement - less scrap Fully ground flange and V-groove, easy on the tool changers for less spindle and changer maintenance Made from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundRear thread for pull stud is M16 X 2.0 This is general standard to choose morse taper size for drills (it may change with different din standard or special sizes) MT 1 IS USED FOR SMALL DRILL UPTO 14MM MT 2 IS USED FOR 14.25 MM TO 23 MMMT 3 IS USED FOR 23.5 TO 31.5 MMMT4 IS USED FOR 32TO 49.5MM3

Mars-Tech Collet chuck ER8 M type in ... from ₹ 1,143.00

Cylindrical Shank / Straight Shank Collet chuck also called Baby collet chuck because of small size and same chuck which comes in BT40 or big tapers , its very useful to increase length of a chuck and also used in turning machine where you have turret sleeve size smaller but straight, its also useful to OEM of machines like Multi Spindle machine and it comes in various sizes to fit in , from Smallest 8 mm to 40 mm are commonly available. This is made from high quality steel and hardened upto 50 hrc for long lasting life ER8 COLLET RANGE FROM 1MM TO 5 MM STANDARD

Mars-Tech ER Nut ER11 A And M Type PACK of 1

Mars-Tech Mars-Tech ER Nut ER11 A And... from ₹ 198.00

Holds all ER11 collets from 1 mm to 7 mmMade from alloy steel hardened to 54 – 56rcPrecision ground ID thread and taperHEX type Has an id thread of – M14X0.75PHEX NUT Outside diameter is 19 MMNormal key to tighteningER11A-Wrench SPANNER works on this collet nut M TYPE Has an id thread of 13mm X .75 pitchM TYPE Outside diameter is .630 inches (16mm) ER11M-Wrench SPANNER works on this collet nutInternal cam removes collet when unscrewedMARSTECH CODE IS ER11A TYPE NUT

Grey Torx Screw 3 mm 7/8/10 Mm Long Pack Of 100

Mars-Tech Grey Torx Screw 3 mm 7/8/10... ₹ 471.00

Grey Torx Screw are also normal screw quality its just a grey coating Hardened Star Torx Screw for Milling Cutters offered are screws that come with precision design and constructed standards ,These torx screw are hardened upto 50-55 hrc for wear resistance, These Torx screw are mainly used in indexable tools as Boring bar , Insert cutter , milling cutter ,They are precise screw for better grip of carbide insert with pocket

Mars-Tech 22 mm Indexable Inserted En... from ₹ 1,143.00

This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machi with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use any ISO inserts of APMT1135 into this

Get Extra 1% Discount on Jaibros App only

Find anything you need

GST Input Credit

7-Day Return

Lowest Prices

Highest Quality