Mars-Tech

18 mm mars-tech Indexable Inserted Endmill

Mars-Tech 18 mm Inserted Endmill Shan... from ₹ 1,079.00

This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of APMT1135 into this HAVE A DETAIL VIEW HERE https://www.youtube.com/watch?v=2wx3B5AEQI0 Different Lengths and Different Shank size please choose before adding to cart

2 mm TDC Grooving Holder suitable to Taegutec Insert 2 mm LEFT/RIGHT HAND

Mars-Tech 2 mm TDC Grooving Holder su... ₹ 944.00

2 mm TDC Grooving Holder suitable to Taegutec Insert 2 mm LEFT/RIGHT HANDGrooving holders are used for parting and grooving in the turning machine. 2 mm grooving holder suitable to taegutech profile of insert it can fit to any insert naming TDC TDJ TDT 2 mm T max is the maximum grooving capacity of the holder if the grooving capacity is 16 mm it means it can part 32 mm of the round bar maximum.

Mars-Tech LNMU0303 Cutter 20mm 150 An... ₹ 2,407.00

EXN03-C20-20-150L-3T ,EXN03-C20-20-200L-3T This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use LNMU0303 Tungaloy Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

Mars-Tech ER40 Spanner Um Type High Q... ₹ 467.00

ER40 UM Spanner Wrench is made from high quality alloy steel ,Thick material allows high torque without bending,4 point contact ensures no distortion of collet nut while tightening,ER40 Wrench works on all of our UM Type and UM type collet chucks that take ER40 collets

Mars-Tech ER 11 M/A Type Spanner Red ... from ₹ 181.00

ER11M Wrench is made from high quality alloy steel ,Thick material allows high torque without bending,5 point contact ensures no distortion of collet nut while tightening,ER11 Wrench works on all of our M Type collet chucks that take ER11 collets

Mars-Tech torx Key T15 type holex br... ₹ 507.00

T15 hardened torx key t type This key can be used for T15 size of screw mostly screw used for this size are M3.5 , M4 Quantity 1 means 1 pc

LNMU03 carbide insert screw 2.5x7 pack of 10

Mars-Tech LNMU03 carbide insert screw... ₹ 236.00

LNMU screw is designed as per LNMU insert and it matches to insert inside taper for more accuracy Technical drawing will be uploaded soon.

LNMU0303 Cutter 25mm -150/200 long-4 TEETH suitable to lnmu 0303

LNMU0303 Milling Cutter Body Dia 25-200-4

Mars-Tech LNMU0303 Cutter 25mm -150/2... ₹ 3,009.00

EXN03-C25-25-200-4T,EXN03-C25-25-150-4T This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use LNMU0303 Tungaloy Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

Mars-Tech BT40ER20A-collet chuck 70L,... from ₹ 1,505.00

BT40 Tool Holder accepts all ER20 collets ER20 Collets range from 1 mm to 14 mm Thread inside internal stop screwMade from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundCoolant through capabilityGage length is 70mm,100MM,150MM,200MMRear thread for pull stud is M16 X 2.0 All holders have capability to become through coolant by simply removing screw in the center by allen key

Mars-Tech 63 Mm Bull Cutter For Die A... from ₹ 1,541.00

63 mm Bull Cutter For Die And Mould Facing Cutter Suitable To RPMT1204 R6 Of Mostly BrandEMRW-6R-63-22-4T suitable to R6 insert This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by center to center and they have center hole both sides, you can use any ISO inserts of RPMT1204/RDKW1204/R6 OF mostly brand into this, Recommended Suitable insert for this cutter is TABIKUT Carbide Insert

MARS-TECH ER NUT ER20 A/M TYPE pack of 1

Mars-Tech MARS-TECH ER NUT ER20 A/M T... from ₹ 210.00

Both types hold all ER20 collets from 1 mm to 14 mmMade from alloy steel hardened to 54 – 56rcPrecision ground ID thread and taperER20A Has an id thread of – M25*1.5PER20A Outside diameter is 34 MMNormal key to tighteninginternal cam removes collet when unscrewedMARSTECH CODE IS ER20A HEX TYPE NUT ER20M Has an id thread of 24mm X 1.0 pitchER20M Outside diameter is 1.102 inches (28mm)Outside has castle notches for tighteningER20M-Wrench works on this collet nutMARSTECH CODE IS ER20M TYPE NUT

Mars-Tech EMRW-C25-6R25-150L 25 Mm Bu... from ₹ 1,204.00

This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of RPMT1204/RDKW1204,R6 OF mostly brand into this , Suggested insert RPMT1204 OF Tabikut Brand.

Mars-Tech U Drill 14 mm from ₹ 1,652.00

Please choose LXD of drill size as it can change drilling capacity which is most important part of drilling. Diameter 13 mm to 17.5 mm comes in 2 shank 20 mm and 25 mm please select from drop down menu All Size comes in 2D 3D 4D 5D and Suitable Inserts SPMG AND WCMX please check from drop down menu .

40 MM Indexable Inserted Endmill | APMT1604 insert

Mars-Tech 40 MM Indexable Inserted En... from ₹ 1,805.00

40 MM Indexable Inserted Endmill Shank 32 Mm 3 Pocket Suitable To APMT1604This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of APMT1604 into this Different Lengths and Different Shank size please choose before adding to cart HAVE A CLEAR VIEW OF PRODUCT ON VIDEO BELOW

Mars-Tech 80 Mm Bull Cutter For Die A... ₹ 2,347.00

80 Mm Bull Cutter For Die And Mould Facing Cutter Suitable To RPMT1204 R6 Of Mostly BrandEMRW-6R-80-27-6T suitable for R6 insert This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use any ISO inserts of RPMT1204/RDKW1204/R6 OF mostly brand into this, Recommended Suitable insert for this cutter is TABIKUT Carbide Insert

ER16 Collet Ultra high precision 0.005 AAA quality

Mars-Tech ER16 Collet Ultra high prec... from ₹ 566.00

The standard ER collet is the most widely used clamping system in the world.Made from Alloy spring steel and fully hardened these ER collets are ideal for many machining applications including boring, milling, reaming, tapping and grinding. Unless specified differently all of our ER collets feature runout of 0.005 micron or less. ,ER collet sizes start at ER8 through ER50. ER16 series collets have a capacity of 1mm-12mm. Each ER16 collet has a range of (1 mm). The size indicated on the collet is the largest size it can hold and can be collapsed smaller within its collapse range of (0.9mm). For example, ER16-3mm can grab a round shank from 3mm diameter to 2.1mm diameter.

Torx Screw 1.8X4 mm Long T6 HP( Pack Of 10 Pcs )

Mars-Tech Torx Screw 1.8X4 mm Long T6... ₹ 142.00

Hardened Star Torx Screw for Milling Cutters offered are screws that come with precision design and constructed standards ,These torx screw are hardened upto 50-55 hrc for wear resistance, These Torx screw are mainly used in indexable tools as Boring bar , Insert cutter , milling cutter ,They are precise screw for better grip of carbide insert with pocket

Straight Shank Collet Chuck ER20 A and M Type

Collet Chuck ER20 A/M Type in Straight Shank

Mars-Tech Collet Chuck ER20 A/M Type ... from ₹ 1,143.00

Cylindrical Shank / Straight Shank Collet chuck also called Baby collet chuck because of small size and same chuck which comes in BT40 or big tapers , its very useful to increase length of a chuck and also used in turning machine where you have turret sleeve size smaller but straight, its also useful to OEM of machines like Multi Spindle machine and it comes in various sizes to fit in , from Smallest 8 mm to 40 mm are commonly available. This is made from high quality steel and hardened upto 50 hrc for long lasting life ER20 Collet Range From 1mm to 14 Mm Standard , Suitable Spanner ER20 A Type and M Type

Threading Holder SER/L 2525-M16 used for Threading inserts.

Mars-Tech Threading Holder SER/L 2525... ₹ 1,151.00

Threading holder with 25 x 25 mm shank and used for 16 mm Threading insert , Right hand holder.

Mars-Tech Chamfer Cutter 45 Degree T... ₹ 1,805.00

Chamfer cutter for 45 degree suitable to TCMT insert CHAMFER CUTTER AFM45-TC16-C20-Z1-DIA 22 TO 40 A chamfer mill, or a chamfer cutter useful for many purposes a drill slop , remove burrs from drill hole , 45 degree angel needed for any machining requirement.