Mars-Tech

C Type Boring Head Shanks different types

Mars-Tech C Type Boring Head Shanks d... from ₹ 1,204.00

BORING HEAD SHANKS USED FOR 50 MM BORING HEAD PLEASE CHECK WHAT IS TAPER OF YOUR MACHINE BEFORE CHOOSING SHANK

Mars-Tech ER Nut ER40 UM Type Nut pack of 1

Mars-Tech Mars-Tech ER Nut ER40 UM Ty... from ₹ 350.00

Holds all ER40 collets from 3 mm to 26 mmMade from alloy steel hardened to 54 – 56rcPrecision ground ID thread and taperHas an id thread of – M50*1.5POutside diameter is 63 MMSUITABLE SPANNER IS ER40UM AND ER40 C TYPE key to tighteninginternal cam removes collet when unscrewedMARSTECH CODE IS ER40UM TYPE NUT

Mars-Tech U Drill 22 mm from ₹ 2,596.00

Please choose LXD of drill size as it can change drilling capacity which is most important part of drilling. All Size comes in 2D 3D 4D 5D and Suitable Inserts SPMG AND WCMX please check from drop down menu .

Mars-Tech BAP400R-80-27-6T Face Milli... ₹ 2,347.00

Dia 80 cutter for APMT1604 insert , facemill cutter 80 mm apmt1604 Shank Holder FMB-27 This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use APMT1604 Of Tabikut Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

Mars-Tech BT40fmb 27 mm Face milling ... from ₹ 1,505.00

BT40 facemill holder also called facemill arbour and facemill adaptor BT40 FMA27 Is mainly used to hold Modular Indexable Cutter with Internal hole of 16 mm any cutter can come with a 27 mm Internal thread but normally 80 mm AND 100 mm Cutters are common in this range. Made from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundGage length is 50MM,100MM,150MM,200MM,250MM,300MMRear thread for pull stud is M16 X 2.0

ER32 Collet Ultra high precision 0.005 AAA quality

Mars-Tech ER32 Collet Ultra high prec... from ₹ 631.00

The standard ER collet is the most widely used clamping system in the world.Made from Alloy spring steel and fully hardened these ER collets are ideal for many machining applications including boring, milling, reaming, tapping and grinding. Unless specified differently all of our ER collets feature runout of 0.010 micron or less. ,ER collet sizes start at ER8 through ER50. ER32 series collets have a capacity of 1mm-20mm. Each ER32 collet has a range of (1 mm). The size indicated on the collet is the largest size it can hold and can be collapsed smaller within its collapse range of (0.9mm). For example, ER32-6mm can grab a round shank from 6mm diameter to 5.1mm diameter.

Mars-Tech U Drill 20mm from ₹ 2,360.00

Please choose LXD of drill size as it can change drilling capacity which is most important part of drilling. All Size comes in 2D 3D 4D 5D and Suitable Inserts SPMG AND WCMX please check from drop down menu .

Mars-Tech U Drill 16 mm from ₹ 1,888.00

Please choose LXD of drill size as it can change drilling capacity which is most important part of drilling. Diameter 13 mm to 17.5 mm comes in 2 shank 20 mm and 25 mm please select from drop down menu All Size comes in 2D 3D 4D 5D and Suitable Inserts SPMG AND WCMX please check from drop down menu .

Torx Key T8 Handle type high quality pack of 2

Mars-Tech Torx Key T8 Handle type h... ₹ 236.00

T8 hardened torx key handle type This key can be used for T15 size of screw mostly screw used for this size are M2.2 , M2.5 Quantity 1 means 2 pc

Mars-Tech BAP400R-100-32-6T Face Mill... ₹ 3,129.00

BAP400R-100-32-6T Face Milling Cutter Dia 100 Modular Type Suitable To APMT11604 Insert face CutterDia 100 cutter for APMT1604 insert , facemill cutter 100 mm apmt1604 Shank Holder FMB-32 BAP400R-100-32-6T EAP400R-100-32-6T, 400R-100-32-6T This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use APMT1604 Of Tabikut Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

Mars-Tech Collet Chuck ER25UM REGO Fi... from ₹ 1,143.00

Cylindrical Shank / Straight Shank Collet chuck also called Baby collet chuck because of small size and same chuck which comes in BT40 or big tapers , its very useful to increase length of a chuck and also used in turning machine where you have turret sleeve size smaller but straight, its also useful to OEM of machines like Multi Spindle machine and it comes in various sizes to fit in , from Smallest 8 mm to 40 mm are commonly available. This is made from high quality steel and hardened upto 50 hrc for long lasting life ER25 COLLET RANGE FROM 1MM TO 16 MM STANDARD , SUITABLE SPANNER ER25 UM REGO FIX TYPE

Mars-Tech Torx Key T6 high quality pack of 10

Mars-Tech Mars-Tech Torx Key T6 high ... ₹ 413.00

T6 hardened Torx key t-type style small size. This key can be used for the T6 size of screw most screws used for this size are M1.6, M1.8 M2, M2.2 Quantity 1 means 10 pcs

Mars-Tech U Drill 18mm from ₹ 2,124.00

Please choose LXD of drill size as it can change drilling capacity which is most important part of drilling. All Size comes in 2D 3D 4D 5D and Suitable Inserts SPMG and WCMX please check from drop down menu .

Mars-Tech U Drill 25mm from ₹ 2,950.00

Please choose LXD of drill size as it can change drilling capacity which is most important part of drilling. All Size comes in 2D 3D 4D 5D and Suitable Inserts SPMG AND WCMX please check from drop down menu .

Mars-Tech U Drill 19 MM from ₹ 2,242.00

Please choose LXD of drill size as it can change drilling capacity which is most important part of drilling. All Size comes in 2D 3D 4D 5D and Suitable Inserts SPMG AND WCMX please check from drop down menu .

Mars-Tech 50 mm sdmt1205 High feed cu... ₹ 2,166.00

50 mm sdmt1205 High feed cutter suitable to tabikut Deskar Gesac brandASRF12-50-22-4T , ASRF12-63-22-4T This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use SDMT1205 Tabikut Brand Insert into this If any other brand has same insert it can also be fixed to this. there are many Chinese brands also making the same inserts so you can just check descriptions of sizes from other brands to fix this insert.

Turning Holder MWLNL/R 2525/2020 M08 Pack of 1

Mars-Tech Turning Holder MWLNL/R 2525... ₹ 1,033.00

Turning Holder MWLNL/R2525/2020 M08 Suitable to WNMG0804/04/08/12 Insert. Spare set remain same for right left 2020 shank 2525 shank Black Color , High Quality , Left Hand. Suitable Insert WNMG080408 Try Tabikut Brand Turning Insert.

ER20 Collet Ultra high precision 0.005 AAA quality

Mars-Tech ER20 Collet Ultra high prec... from ₹ 578.00

The standard ER collet is the most widely used clamping system in the world.Made from Alloy spring steel and fully hardened these ER collets are ideal for many machining applications including boring, milling, reaming, tapping and grinding. Unless specified differently all of our ER collets feature runout of 0.010 micron or less. ,ER collet sizes start at ER8 through ER50. ER20 series collets have a capacity of 1mm-14mm. Each ER20 collet has a range of (1 mm). The size indicated on the collet is the largest size it can hold and can be collapsed smaller within its collapse range of (0.9mm). For example, ER20-3mm can grab a round shank from 3mm diameter to 2.1mm diameter.

Mars-Tech ERG Tap Collets ERG32 Selec... ₹ 903.00

ER TAP COLLETS ARE SIMILAR LIKE ER COLLETS AND CAN FIT INTO SAME COLLET CHUCK USED FOR ER COLLETS, BUT IT DOES NOT HAVE COLLAPSIBILITY AND EVERY COLLET COME FOR A FIXED SIZE. EVERY TAP HAS A SQUARE AND ROUND SO YOU JUST NEED TO CHECK SQUARE AND ROUND SIZE OF TAP AND ER CHUCK SIZE THAN YOU CHOOSE WHAT COLLET WILL FULFILL YOUR PURPOSE Tapping collets will allow user to convert collet chucks used for many purposes into tapping chucks. ER Tapping Collets with Square Drive for synchronous tapping operations using any RD/ER collet chuck. Collet bore is exact tool diameter, with square drive, for accuracy and rigidity. Square in the ER Tap collet is offer tight grip for Tap which reduces slippage in Collets. Available sealed for coolant-through applications, as well as in DIN and JIS standard metric sizes.

Grey Torx Screw 2.2 Mm 6 Mm Long Pack Of 100

Mars-Tech Grey Torx Screw 2.2 Mm 6 Mm... ₹ 471.00

Grey Torx Screw are also normal screw quality its just a grey coating Hardened Star Torx Screw for Milling Cutters offered are screws that come with precision design and constructed standards ,These torx screw are hardened upto 50-55 hrc for wear resistance, These Torx screw are mainly used in indexable tools as Boring bar , Insert cutter , milling cutter ,They are precise screw for better grip of carbide insert with pocket

Get Extra 1% Discount on Jaibros App only

Find anything you need

GST Input Credit

7-Day Return

Lowest Prices

Highest Quality