2 flute carbide cutter
Carbide Ballnose 45 HRC
Carbide Ballnose 55 HRC
Carbide Drilling Inserts
Carbide Endmill 45 HRC
CARBIDE ENDMILL 55 HRC
Carbide Milling Inserts
Carbide Turning Insert
Roughing Cutter
All products
5 & 6 Flute Endmills
Accessories
Accessories APP
Accessories APP 2
All
Ballnose (45 HRC)
Ballnose (55 HRC)
Ballnose (60 HRC)
Ballnose (65 HRC)
Ballnose (Inserted)
Ballnose 4 Flute (55HRC)
BBT40 Holders
Boring Heads
BPT
BT-30 Type
BT-40 BCA
BT-40 Type
Carbide Cutters
Carbide Drills
Carbide Inserts
CARBIDE15
CBN Inserts
Ceramic
Ceratizit
Cermet Inserts
Chamfer Cutter
Collet Chucks
Collet Chuks
Corner Radius Endmill
Cylndrical Chucks
Dasqua
Deals
Deskar
Dijet
Drilling Insert
Duracarb
Edge Finders
Endmill (3 Flute) DLC
Endmill (45 HRC)
Endmill (65 HRC)
Endmill (Inserted)
Endmill - 55 HRC
Endmill - 60 HRC
Endmill 2 Flute
ER Collets
ER Nuts
ER Spanners
ER Tap Collets
Find the Edge
Gauges
Grooving Inserts
Grooving Work
High Feed Cutter
Hitachi
HRC63(Nano Coated)
Indexable Cutters
Inserted Cutters
INSERTS15
ISO40 Holders
Jaibros
JXD
Keyless Drill Chuck
Korloy
Korloy
Kyocera
Life
Locking Device
Long Neck Cutters
Machine Tools & Accessories
Mars-Tech
Measurings
Metrology
Micro Drills
Micro Endmill Ballnose
Milling Inserts
Milling Opertations
Miscellaneous
Mitsubishi
Multifunction Tools
Non Standard Endmills
Non-Ferrous Inserts
PCD Inserts
Promo Inserts
Pull Studs
Rougher Endmills
Single Flute Endmill
SK-40 Type
Straight Shank Chucks
Tabikut
Tabikut Inserts
TaeguTec
Threading Application
Threading Inserts
Tool Boy
Tools Boy
Torx Keys
Torx Screws
TURNING
Turning Holders
Turning Inserts
Turning Usage
U Drill
Uncoated End & Ball
volume discount
Wholesale Deals
Widia
Yuzuki
ZCCCT
Zero Setter
Tabikut
6mm Carbide Endmill 55 HRC ...
from ₹ 511.00
6mm Carbide Endmill 55 HRC 4 Flutes Total Length Is 50/75/100/150 MMSolid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill etc, Plastic Packaging for non-breakable packing
Tabikut
8mm Carbide Endmill 55 HRC ...
from ₹ 551.00
8mm Carbide Endmill 55 HRC 4 Flutes Total Length Is 60/75/100/150/200 MMSolid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, Plastic Packaging for non-breakable packing
Tabikut
10 mm Carbide Endmill 55 HR...
from ₹ 865.00
10 mm Carbide Endmill 55 HRCSolid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing
Tabikut
4 mm Carbide Endmill 55 HRC...
from ₹ 322.00
4 mm Carbide Endmill 55 HRC 4 Flutes 50/75/100 long.50 mm Length price is for 2 Nos. you order 1 quantity you will get 2 pcs 330 rs. price is for 2 nos. 1 will cost 165 rs. only.
Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, Plastic Packaging for non-breakable packing
Tabikut
3mm Carbide Endmill tabikut...
from ₹ 321.00
3mm Carbide Endmill tabikut 55 HRCSolid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing
Tabikut
APMT1135 T15 Carbide Insert...
₹ 885.00
APMT1135 T15 Carbide Insert Tabikut pack of 10WE SELL ORIGINAL INSERTS ONLY
APMT1135TABIKUT
Carbide insert for Steel and Stainless Steel machining with or without coolant, used in any suitable cutter for BAP300R and this is used in milling machines mainly. Suitable cutter any cutter which suits APMT1135 insert.For steel, mild steel , hrc upto 45 with coolant.APMT1135 for BAP300R cutters brown coatedSUITABLE TO ALL MILLING CUTTER FOR APMT1135
Tabikut
5 Carbide Endmill 55 HRC 5 ...
from ₹ 302.00
5 Carbide Endmill 55 HRC 5 mm Shank 4 Flutes Total Length Is 50/75/100 MMSolid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle , Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill etc, Plastic Packaging for non-breakable packing
Tabikut
2 mm Carbide Endmill 55 HRC...
₹ 342.00
Solid Carbide Cutter are used to machine Hard and tough Material , Steel , Alloy Steel , Cast iron , stainless steel and many other material grades.
Bronze TiSiN Coating , Endmill for Better Life and wear resistance.35 Degree Helix Angel , Grain Size 0.5μmUsed for Face Mill , Shoulder mill , side mill etc ,Plastic Packaging for non breakable packing
Tabikut
CARBIDE INSERT LNMU0303 Hig...
from ₹ 1,357.00
HIGH FEED MILLING INSERTS WITH 4 CUTTING EDGES
1.2 mm radius
Carbide insert for Steel and Stainless Steel machining with or without coolant , used in any suitable cutter for LNMU and this is used in milling machine mainly. Suitable cutter any cutter which suits LNMU0303 insert.
For steel , mild steel , hrc upto 45-55 with and without coolant
Tabikut
4 mm Carbide Ballnose 55 HR...
from ₹ 287.00
4 mm Carbide Ballnose 55 HRC 2 flutes Tabikut50 mm Length price is for 2 Nos. you order 1 quantity you will get 2 pcs 380 rs. price is for 2 nos. 1 will cost 190 rs. only.
Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill etc, Plastic Packaging for non breakable packing
Flute Length of Ballnose is double of diameter if diameter is 1 mm flute length will be 2 mm same for other sizes , if total length increase flute length remain same of double of diameter.
Tabikut
6 Mm Carbide Ballnose 55 HR...
from ₹ 413.00
6 Mm Carbide Ballnose 55 HRC 2 Flutes, Shank 6 MM Flute Length 12 Mm Total Length Is 50/75/100 MmSolid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle , Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill etc, Plastic Packaging for non-breakable packing
The flute Length of the Ballnose is double of diameter if the diameter is 1 mm flute length will be 2 mm same for other sizes, if the total length increase flute length remains same of double of diameter.
Tabikut
1 mm Carbide Endmill 55 HRC...
₹ 342.00
1 mm Carbide Endmill 55 HRC PACK OF 2Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing
Size of Carbide Endmill 55 HRC: 1mm
Tabikut
1.5 mm Carbide Endmill 55 H...
₹ 342.00
1.5 mm Carbide Endmill 55 HRC PACK OF 2Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc. Plastic Packaging for non-breakable packing
Size of Carbide Endmill 55 HRC: 1.5mm
Tabikut
APMT1604 T15 grade Carbide ...
₹ 1,239.00
APMT1604 T15 grade Carbide Insert Tabikut pack of 10APMT1604 T15 .
T15 Grade is for general machining steel stainless steel Forging etc.
Carbide inserts for Steel and Stainless Steel machining with or without coolant, are used in any suitable cutter for BAP400R, and this is used in milling machines mainly. Suitable cutter any cutter which suits the APMT1604 insert.For steel, mild steel, HRC upto 45-55 with and without coolantAPMT1604 for BAP400R cutters brown coatedSUITABLE TO ALL MILLING CUTTERS FOR APMT1604
Tabikut
TABIKUT APMT1604 T20 Carbid...
₹ 1,239.00
WE SELL ORIGINAL INSERTS ONLY
APMT1604 T20 grade
T20 Grade is for general soft machining and
Carbide insert for Steel and Stainless Steel machining with or without coolant , used in any suitable cutter for BAP400R and this is used in milling machine mainly. Suitable cutter any cutter which suits APMT1604 insert.For steel , mild steel , hrc upto 45-55 with and without coolantAPMT1604 for BAP400R cutters brown coatedSUITABLE TO ALL MILLING CUTTER FOR APMT1604
Tabikut
TABIKUT R6 Carbide Insert R...
₹ 1,003.00
Carbide insert for Steel and Stainless Steel machining with or without coolant , used in any suitable cutter for EMRW6R and this is used in milling machine mainly. Suitable cutter any cutter which suits RPMT1204 insert.For steel , mild steel , hrc upto 45-55 with and without coolantR6 for EMRW6R-CUTTER BODYcoatedSUITABLE TO ALL MILLING CUTTER FOR R61204
Tabikut
TABIKUT Carbide Insert APMT...
₹ 900.00
WE SELL ORIGINAL INSERTS ONLY
APMT1135 xmTABIKUT T20
Carbide insert for Steel and Stainless Steel machining with or without coolant , used in any suitable cutter for BAP300R and this is used in milling machine mainly. Suitable cutter any cutter which suits APMT1135 insert.For steel , mild steel , hrc upto 45 with coolant.APMT1135 for BAP300R cutters brown coatedSUITABLE TO ALL MILLING CUTTER FOR APMT1135
Tabikut
2 Mm Carbide Ballnose 55 HR...
₹ 434.00
Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel , Cast iron , stainless steel and many other material grades.
Bronze TiSiN Coating , Endmill for Better Life and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc. plastic Packaging for non-breakable packing
The flute Length of the Ballnose is double of diameter if the diameter is 1 mm flute length will be 2 mm same for other sizes if the total length increase flute length remains the same as the double diameter.
Tabikut
3 mm Carbide Endmill 45 HRC...
₹ 260.00
3 mm Carbide Endmill 45 HRC PACK OF 2Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Wine Coating TiALin Coating, Endmill for Better Life and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill etc, Plastic Packaging for non breakable
Tabikut
4 mm Carbide Endmill 45 HRC...
₹ 260.00
4 mm Carbide Endmill 45 HRC PACK OF 2Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Wine Coating TiALin Coating, Endmill for Better Life and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill etc, Plastic Packaging for non breakable