Cutters High Feed

16 mm cutter LNMU0303 - 150 And 200 Long Suitable To LNMU0303 Inserts pack of 1

Mars-Tech 16 mm cutter LNMU0303 - 150... ₹ 1,926.00

EXN03-C16-16-150L-2T , EXN03-C16-16-200L-2T This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use LNMU0303 Tungaloy Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

Mars-Tech LNMU0303 Cutter 20mm 150 An... ₹ 2,407.00

EXN03-C20-20-150L-3T ,EXN03-C20-20-200L-3T This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use LNMU0303 Tungaloy Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

LNMU0303 Cutter 25mm -150/200 long-4 TEETH suitable to lnmu 0303

LNMU0303 Milling Cutter Body Dia 25-200-4

Mars-Tech LNMU0303 Cutter 25mm -150/2... ₹ 3,009.00

EXN03-C25-25-200-4T,EXN03-C25-25-150-4T This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use LNMU0303 Tungaloy Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

Mars-Tech 50 mm sdmt1205 High feed cu... ₹ 2,166.00

50 mm sdmt1205 High feed cutter suitable to tabikut Deskar Gesac brandASRF12-50-22-4T , ASRF12-63-22-4T This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use SDMT1205 Tabikut Brand Insert into this If any other brand has same insert it can also be fixed to this. there are many Chinese brands also making the same inserts so you can just check descriptions of sizes from other brands to fix this insert.

LNMU0303 Cutter 32mm -150/200L-5TEETH Suitable To LNMU0303 Inserts From Various Brands

LNMU0303 Milling Cutter Body Dia 32-200L-5TEETH

Mars-Tech LNMU0303 Cutter 32mm -150/2... ₹ 3,852.00

EXN03-C32-32-200L-5T ,EXN03-C32-32-150L-5T This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use LNMU0303 Tungaloy Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

Sold out

Indexable Inserted High Feed Cutter Dia 50 Mm

Mars-Tech jdmw12 Dia 50 Mm Indexable... ₹ 1,805.00

AJX12-50-22-4T High Feed Milling Cutter FMB Dia 22 mm This is Shoulder and Face Milling Cutter high feed used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use JDMW09 from Mitsubishi Brand Insert into this , If any other brand have same insert it can also fixed to this.

Indexable Inserted High Feed Endmill Dia 25 Mm

Mars-Tech jdmw09 25mm Indexable Inser... ₹ 1,192.00

AJX09-C25-25-200L-2T This is Shoulder and Face Milling Cutter high feed used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use JDMW09 from Mitsubishi Brand Insert into this , If any other brand have same insert it can also fixed to this.

LNMU0303 Milling Cutter Body Modular Type Dia 50-8TEETH

Mars-Tech LNMU0303- 50 mm cutter Mil... ₹ 4,484.00

EXN03-50-22-8T This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use LNMU0303 Tungaloy Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

Mars-Tech LNMU0303 40 mm cutter Body ... ₹ 4,484.00

EXN03-40-22-6T This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use LNMU0303 Tungaloy Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

Mars-Tech 63 Mm For SDMT1205 High Fee... ₹ 2,347.00

63 Mm For SDMT1205 High Feed Cutter Dia Insert Suitable To Deskar Gesac BrandASRF12-50-22-4T , ASRF12-63-22-4T This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use SDMT1205 Tabikut Brand Insert into this If any other brand has same insert it can also be fixed to this. there are many Chinese brands also making same inserts so you can just check descriptions of size from other brands to fix this insert.

Mars-Tech 63 mm snmx SNMX1206 Insert ... ₹ 5,686.00

63 mm snmx SNMX1206 Insert Facemill In 45 Degree And 88 Degree Suitable To KORLOY Brand SNMX1206 Facemill Cutter, indexable cutter body RM8 series 8 edges insert cutter body for dia 50,63, and 80 mm in 45-degree and 88 degree This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides , you can use SNMX1206 Of Korloy and Tabikut Brand Insert into this If any other brand has same insert it can also be fixed to this. there are many Chinese brands also making the same inserts so you can just check descriptions of sizes from other brands to fix this insert.

WDMW080520ZTR High Feed Insert Cutter Body

Mars-Tech WDMW080520ZTR High Feed Ins... ₹ 1,926.00

SKS-2025-200-S25 , SKS-4050R-08-22 ,SKS-2028-40E-S25,SKS-4063R-08-27,SKS-5080R-10-27 This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use WDMW080520 DIJETBrand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

Mars-Tech 80 mm SNMX1206 Insert Facem... ₹ 6,259.00

80 mm SNMX1206 Insert Facemill in 45 Degree And 88 Degree Suitable To KORLOY BrandSNMX1206 Facemill Cutter, indexable cutter body RM8 series 8 edges insert cutter body for dia 50, 63 and 80 mm in 45 degree and 88 degree This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use SNMX1206 Of Korloy and Tabikut Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

Mars-Tech 50 mm roughing cutter modul... ₹ 11,795.00

50 mm roughing cutter modular type suitable to apmt1604This is Helical Cutter also called a rougher cutter it has more pockets used for milling operation for roughing or plunging which saves time used in roughing operation also This is a 50 mm modular cutter please read the details before ordering BAP400R-50-22-60M-3T-15P Suitable Insert - APMT1604 Shank Diameter for holding - 22 mm fmb holder for holding with the extra long screw you need to purchase extra, you can easily get from a local shop. Cutter Diameter- 50 mm Cutting length Helical length - 60 mm Total Length - 100 mm 3 Pocket - 15 inserts will fit in one time

Mars-Tech WDMW06T320 High Feed insert... ₹ 1,805.00

SKS-2025-200-S25 , SKS-4050R-08-22 ,SKS-2028-40E-S25,SKS-4063R-08-27,SKS-5080R-10-27 This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use WDMW06T320 DIJETBrand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

Indexable Inserted High Feed Endmill Dia 32 Mm

Indexable Inserted High Feed Endmill Dia 32 Mm Shank 32 Mm 2 Pocket Suitable To JDMW12 For Mitsubishi Insert

Mars-Tech Indexable Inserted High Fee... ₹ 1,805.00

AJX12-C32-32-200L-2T HIGH FEED CUTTER This is Shoulder and Face Milling Cutter high feed used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use JDMW120420 from Mitsubishi Brand Insert into this , If any other brand have same insert it can also fix to this cutter.

Mars-Tech AJX09-50-22-5T JDMW09 Cutte... ₹ 2,166.00

AJX09-50-22-5T JDMW09 Cutter 50mm in 5 PocketsAJX09 is suitable to JDMW09 insert of any Brand will suit this cutter, this is a high feed insert cutter

Mars-Tech 50 mm SNMX1206 cutter inser... ₹ 4,754.00

50 mm SNMX1206 cutter insert face mill in 45 degrees and 88 degrees suitable to KORLOY BrandSNMX1206 Facemill Cutter, indexable cutter body RM8 series 8 edges insert cutter body for dia 50,63, and 80 mm in 45-degree and 88 degree This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use SNMX1206 Of Korloy and Tabikut Brand Insert into this If any other brand has same insert it can also be fixed to this. there are many Chinese brands also making the same inserts so you can just check descriptions of sizes from other brands to fix this insert.

LNMU0303 Milling Cutter Body Modular Type Dia 63-10

Mars-Tech LNMU0303-63 mm cutter Body ... ₹ 5,686.00

EXN03-63-22-10T This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use LNMU0303 Tungaloy Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.