Indexable Cutters

Mars-Tech EMRW-C25-6R25-150L 25 Mm Bu... from ₹ 1,204.00

This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of RPMT1204/RDKW1204,R6 OF mostly brand into this , Suggested insert RPMT1204 OF Tabikut Brand.

Mars-Tech 63 Mm Bull Cutter For Die A... from ₹ 1,541.00

63 mm Bull Cutter For Die And Mould Facing Cutter Suitable To RPMT1204 R6 Of Mostly BrandEMRW-6R-63-22-4T suitable to R6 insert This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by center to center and they have center hole both sides, you can use any ISO inserts of RPMT1204/RDKW1204/R6 OF mostly brand into this, Recommended Suitable insert for this cutter is TABIKUT Carbide Insert

Mars-Tech 80 Mm Bull Cutter For Die A... ₹ 2,347.00

80 Mm Bull Cutter For Die And Mould Facing Cutter Suitable To RPMT1204 R6 Of Mostly BrandEMRW-6R-80-27-6T suitable for R6 insert This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use any ISO inserts of RPMT1204/RDKW1204/R6 OF mostly brand into this, Recommended Suitable insert for this cutter is TABIKUT Carbide Insert

40 MM Indexable Inserted Endmill | APMT1604 insert

Mars-Tech 40 MM Indexable Inserted En... from ₹ 1,805.00

40 MM Indexable Inserted Endmill Shank 32 Mm 3 Pocket Suitable To APMT1604This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of APMT1604 into this Different Lengths and Different Shank size please choose before adding to cart HAVE A CLEAR VIEW OF PRODUCT ON VIDEO BELOW

Mars-Tech BAP400R-80-27-6T Face Milli... ₹ 2,347.00

Dia 80 cutter for APMT1604 insert , facemill cutter 80 mm apmt1604 Shank Holder FMB-27 This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use APMT1604 Of Tabikut Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

Mars-Tech Chamfer Cutter 45 Degree T... ₹ 1,805.00

Chamfer cutter for 45 degree suitable to TCMT insert CHAMFER CUTTER AFM45-TC16-C20-Z1-DIA 22 TO 40 A chamfer mill, or a chamfer cutter useful for many purposes a drill slop , remove burrs from drill hole , 45 degree angel needed for any machining requirement.

Mars-Tech BAP400R-100-32-6T Face Mill... ₹ 3,129.00

BAP400R-100-32-6T Face Milling Cutter Dia 100 Modular Type Suitable To APMT11604 Insert face CutterDia 100 cutter for APMT1604 insert , facemill cutter 100 mm apmt1604 Shank Holder FMB-32 BAP400R-100-32-6T EAP400R-100-32-6T, 400R-100-32-6T This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use APMT1604 Of Tabikut Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

Mars-Tech 50 mm sdmt1205 High feed cu... ₹ 2,166.00

50 mm sdmt1205 High feed cutter suitable to tabikut Deskar Gesac brandASRF12-50-22-4T , ASRF12-63-22-4T This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use SDMT1205 Tabikut Brand Insert into this If any other brand has same insert it can also be fixed to this. there are many Chinese brands also making the same inserts so you can just check descriptions of sizes from other brands to fix this insert.

Mars-Tech BAP400R-40-16/22-4T Face Mi... from ₹ 1,444.00

BAP400R-40-16/22-4T Face Milling Cutter Dia 40 Modular APMT1604 Insert CutterDia 40 cutter for APMT1604 insert , facemill cutter 40 mm apmt1604 Shank Holder FMB-22 This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use APMT1604 Of Tabikut Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert. HAVE A CLEAR VIEW ON VIDEO BELOW

Mars-Tech 50 Mm Bull Cutter For Die A... from ₹ 1,204.00

50 Mm Bull Cutter For Die And Mould Facing Cutter Suitable To RPMT12T3 R6 Of Mostly BrandEMRW-6R-50-22-4T suitable to R6 12T3 insert This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts Or DIJETof RDMT12T3 RPMT12T3/RDKW12T2/R6 OF mostly brand into this , Recommended Suitable insert for this cutter is TABIKUT Carbide Insert

Sold out

Mars-Tech 16mm inserted ballnose for ... ₹ 1,204.00

EMRT-C16-4R16-200L THERE ARE 2 TYPES IF YOU NEED 0803 PLEASE CHECK THE THICKNESS OF THE INSERT 08T2 HAS A THICKNESS OF 2.78 MM ( CHIP BREAKER SURFACE) 0803 HAS A THICKNESS OF 3.18 MM ( PLAIN SURFACE) This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use any ISO inserts of RPMW08T2/RDKW08T2/0803/R4 OF mostly brand into this.

Mars-Tech BAP300R-50-22-6T Face Milli... ₹ 2,227.00

BAP300R-50-22-6T Face Milling Cutter Dia 50 Modular Type Suitable To APMT1135 Insert Bull CutterDia 50 cutter for APMT1135 insert, face mill cutter 50 mm apmt1135 This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use APMT1135 Of Tabikut Brand Insert into this If any other brand have same insert it can also be fixed to this. there are many Chinese brands also making the same inserts so you can just check the description of the size from other brands to fix this insert.

Mars-Tech 32mm R6 bull nose- 2 Pocket... from ₹ 2,277.00

32 MM Bull Nose In 32 mm Shank - 2 Pocket Suitable To RPMT1204 /R6EMRW-C32-6R32-200L-2T , EMRW-C32-6R32-250L-2T This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use any ISO inserts of RPMT1204/RDKW1204, R6 OF mostly brand into this, Suggested insert RPMT1204 OF Tabikut Brand.

NICE CUTT 10/12 mm cutter suitable to... ₹ 2,166.00

10/12 mm cutter is suitable for JDMT07 Hitachi Brand Insert. pack of 1NICE CUTT BRAND ESE-C10-10-100L-2T SCREW 1.8X4 MM T6 KEY ESE-C12-12-120L-2T SCREW 1.8X4 MM T6 KEY This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use JDMT070204 For HITACHI Brand Insert into this If any other brand have same insert can also fix to this cutter body

Mars-Tech 32 MM Bull Nose in 25 mm Sh... from ₹ 1,444.00

32 MM Bull Nose in 25 mm Shank - 2 pocket suitable to RPMT1204 /R6EMRW-25-6R32-200L-2T , EMRW-C25-6R32-250L-2T This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC not to wear out, Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of RPMT1204/RDKW1204,R6 OF mostly brand into this , Suggested insert RPMT1204 OF Tabikut Brand.

Chamfer Cutter 45 Degree TCMT11 15-27 RANGE

Mars-Tech Chamfer Cutter 45 Degree TC... ₹ 1,505.00

Chamfer cutter for 45 degree suitable to TCMT insert CHAMFER CUTTER AFM45-TC16-C16-Z1-DIA 15 TO 27 A chamfer mill, or a chamfer cutter useful for many purposes a drill slop , remove burrs from drill hole , 45 degree angel needed for any machining requirement.

Sold out

bull cutter for die & mould facing cutter

Mars-Tech 52 Mm Bull Cutter For Die A... ₹ 1,505.00

52 Mm Bull Cutter For Die And Mould Facing Cutter Suitable To RPMT1204 R6 Of Mostly BrandEMRW-6R-52-22-4T suitable to R6 1204 insert This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by center to center and they have center hole both sides, you can use any ISO inserts RPMT1204/RDKW1204/R6 OF mostly brand into this, acct, Chorley, targeted, dijet, Kyocera, Mitsubishi.

Sold out

Mars-Tech 63mm Apmt1604 other edge in... ₹ 2,166.00

63 MM APMT1604 OTHER EDGE CUTTER 4 POCKET 75 DEGREE Dia 63 cutter for APMT1604 insert , facemill cutter 63 mm apmt1604 Shank Holder FMB-22 This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides , you can use APMT1604 Of Tabikut Brand Insert into this If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

Mars-Tech 100 Mm Bull Cutter For Die ... ₹ 3,310.00

100 Mm Bull Cutter For Die And Mould Facing Cutter Suitable To RPMT1204 R6 Of Mostly BrandEMRW-6R-100-32-6T suitable for R6 insert100 mm Bull Cutter For Die And Mould Facing Cutter This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use any ISO inserts of RPMT1204/RDKW1204/R6 OF mostly brand into this. Recommended Suitable insert for this cutter is TABIKUT Carbide Insert

Indexable Inserted High Feed Cutter Dia 50 Mm

Mars-Tech jdmw12 Dia 50 Mm Indexable... ₹ 1,805.00

AJX12-50-22-4T High Feed Milling Cutter FMB Dia 22 mm This is Shoulder and Face Milling Cutter high feed used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use JDMW09 from Mitsubishi Brand Insert into this , If any other brand have same insert it can also fixed to this.