Machine Tools & Accessories

Mars-Tech ER 32 COLLET DIN6499B AA 0.... from ₹ 313.00

The standard ER collet is the most widely used clamping system in the world.Made from Alloy spring steel and fully hardened these ER collets are ideal for many machining applications including boring, milling, reaming, tapping and grinding. Unless specified differently all of our ER collets feature runout of 0.010 micron or less. ,ER collet sizes start at ER8 through ER50. ER32 series collets have a capacity of 1mm-20mm. Each ER32 collet has a range of (1 mm). The size indicated on the collet is the largest size it can hold and can be collapsed smaller within its collapse range of (0.9mm). For example, ER32-6mm can grab a round shank from 6mm diameter to 5.1mm diameter.

Mars-Tech ER 16 COLLET DIN6499B AA 0.... from ₹ 241.00

The standard ER collet is the most widely used clamping system in the world.Made from Alloy spring steel and fully hardened these ER collets are ideal for many machining applications including boring, milling, reaming, tapping and grinding. Unless specified differently all of our ER collets feature runout of 0.010 micron or less. ,ER collet sizes start at ER8 through ER50. ER16 series collets have a capacity of 1mm-12mm. Each ER16 collet has a range of (1 mm). The size indicated on the collet is the largest size it can hold and can be collapsed smaller within its collapse range of (0.9mm). For example, ER16-3mm can grab a round shank from 3mm diameter to 2.1mm diameter.

sale

Mars-Tech ER 25 COLLET DIN6499B AA 0.... from ₹ 253.00 ₹ 420.00

The standard ER collet is the most widely used clamping system in the world.Made from Alloy spring steel and fully hardened these ER collets are ideal for many machining applications including boring, milling, reaming, tapping and grinding. Unless specified differently all of our ER collets feature runout of 0.010 micron or less. ,ER collet sizes start at ER8 through ER50. ER25 series collets have a capacity of 1mm-16mm. Each ER25 collet has a range of (1 mm). The size indicated on the collet is the largest size it can hold and can be collapsed smaller within its collapse range of (0.9mm). For example, ER25-3mm can grab a round shank from 3mm diameter to 2.1mm diameter.

Mars-Tech Mechanical Edge Finder 10x4 mm ₹ 258.00

Mechanical Edge Finder also called touch point sensor are used for find Zero point of the workpiece and find center of the hole.

sale

Mars-Tech ER 20 COLLET DIN6499B AA 0.... from ₹ 247.00 ₹ 380.00

The standard ER collet is the most widely used clamping system in the world.Made from Alloy spring steel and fully hardened these ER collets are ideal for many machining applications including boring, milling, reaming, tapping and grinding. Unless specified differently all of our ER collets feature runout of 0.010 micron or less. ,ER collet sizes start at ER8 through ER50. ER20 series collets have a capacity of 1mm-14mm. Each ER20 collet has a range of (1 mm). The size indicated on the collet is the largest size it can hold and can be collapsed smaller within its collapse range of (0.9mm). For example, ER20-3mm can grab a round shank from 3mm diameter to 2.1mm diameter.

Mars-Tech ER 11 COLLET DIN6499B AA 0.... from ₹ 253.00

The standard ER collet is the most widely used clamping system in the world.Made from Alloy spring steel and fully hardened these ER collets are ideal for many machining applications including boring, milling, reaming, tapping and grinding. Unless specified differently all of our ER collets feature runout of 0.010 micron or less. ,ER collet sizes start at ER8 through ER50. ER11 series collets have a capacity of 1mm-7mm. Each ER11 collet has a range of (0.5mm). The size indicated on the collet is the largest size it can hold and can be collapsed smaller within its collapse range of (0.5mm). For example, ER11-3mm can grab a round shank from 3mm diameter to 2.5mm diameter.

Mars-Tech ER 40 COLLET DIN6499B AA 0.... ₹ 361.00

The standard ER collet is the most widely used clamping system in the world.Made from Alloy spring steel and fully hardened these ER collets are ideal for many machining applications including boring, milling, reaming, tapping and grinding. Unless specified differently all of our ER collets feature runout of 0.010 micron or less. ,ER collet sizes start at ER8 through ER50. ER40 series collets have a capacity of 3mm-26mm. Each ER32 collet has a range of (1 mm). The size indicated on the collet is the largest size it can hold and can be collapsed smaller within its collapse range of (0.9mm). For example, ER40-6mm can grab a round shank from 6mm diameter to 5.1mm diameter.

Mars-Tech BT40ER32 UM collet chuck-70... from ₹ 1,202.00

BT40 Tool Holder accepts all ER32 collets ER32 Collets range from 1 mm to 20 mm Thread inside internal stop screwMade from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundCoolant through capabilityGage length is 70mm,100MM,150MM,200MMRear thread for pull stud is M16 X 2.0 All holders have capability to become through coolant by simply removing screw in the center by allen key

Mars-Tech BT40 Pull Stud In Various D... from ₹ 132.00

BT40 Pull stud used in CNC machines for BT40 holders ISO standard name is MAS403 Pull studs are an important link between machine and tool. The requirements concerning accuracy, rigidity and reliability are very high. Pull studs of minor quality not only decrease the performance of the machine, they are even a safety risk. A breaking pull stud might cause severe damage on machine and workpiece and even injuries on persons. made of special steel for higher rigidity proper heat treated ,

BT40 fmb 22 mm Face milling holder arbour pack of 1

Mars-Tech BT40 fmb 22 mm Face milling... from ₹ 1,505.00

BT40 facemill holder also called facemill arbour and facemill adaptor BT40 FMA22 Is mainly used to hold Modular Indexable Cutter with Internal hole of 16 mm any cutter can come with a 22 mm Internal thread but normally 50 mm AND 63 mm Cutters are common in this range. Made from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundGage length is 50MM,100MM,150MM,200MM,250MM,300MMRear thread for pull stud is M16 X 2.0

BT40 side lock adaptor , SLA 12 ,16,20,25,32,40 mm For Cylindrical Shank pack of 1

Mars-Tech BT40 side lock adaptor , SL... from ₹ 1,505.00

BT40 SLA holder also called SIDE LOCK HOLDER BT40 SIDE LOCK Is mainly used to hold Cylendrical/Straight Shank of anything like Indexable Cutter , Baby chuck , Carbide Drill whatever with straight shank can hold into for better rigidity and strength it range from 16 mm to 40 mm as small diameter of shank can be hold in standard collet chuck. Made from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundGage length is 50MM,100MM,150MMRear thread for pull stud is M16 X 2.0

Mars-Tech BT40ER16 collet chuck-70L,1... from ₹ 1,505.00

BT40 Tool Holder accepts all ER16 collets ER16 Collets range from 1 mm to 12 mm Thread inside internal stop screwMade from alloy steel hardened to 54 – 56rcBalanced to G6.3 at 12,000 rpmsConcentricity is less than .005 micron upto 100 Length and 0.012 upto 200 LengthAll critical tool holder surfaces precision groundCoolant through capabilityGage length is 70mm,100MM,150MM,200MM Rear thread for pull stud is M16 X 2.0 All holders have capability to become through coolant by simply removing screw in the center by allen key

Mars-Tech Er32 Spanner wrench for ER ... from ₹ 229.00

ER32 UM and C Type Spanner Wrench is made from high quality alloy steel ,Thick material allows high torque without bending,4 point contact ensures no distortion of collet nut while tightening,ER32 Wrench works on all of our UM Type and UM type collet chucks that take ER32 collets

Mars-Tech Mechanical Edge Finder 10x1... ₹ 258.00

Mechanical Edge Finder also called touch point sensor are used for find Zero point of the workpiece and find center of the hole.

Mars-Tech ER Nuts ER16 A AND M TYPE pack of 1

Mars-Tech Mars-Tech ER Nuts ER16 A AN... from ₹ 210.00

BOTH type nut hold all ER16 collets from 1 mm to 12 mmMade from alloy steel hardened to 54 – 56rcPrecision ground ID thread and taperER16A Has an id thread of – M22*1.5PER16A Outside diameter is 28 MMNormal key to tighteninginternal cam removes collet when unscrewedMARSTECH CODE IS ER16A HEX TYPE NUT ER16M Collet Nut has an id thread of 19mm X 1.0 pitchER16M Outside diameter is .866 inches (22mm)Outside has castle notches for tighteningER16M Wrench works on this collet nut

Mars-Tech Keyless Drill Chuck 1-13mm ... ₹ 1,743.00

MARS-TECH Heavy Duty Keyless Drill chucks are used for CNC machining center and milling machine Special Designed & manufactured against for super heavy torque use. Owning to inspecting strictly & with excellent RUNOUT accuracy and Quality guaranteed the gripping power double than general brand Avoid the drill dropped when used in instaneous change of direction and equipped with spanner hole for tightening prefect safety. Accuracy 50 mm Length within 0.05mm Spanner is optional not included with chuck. YELLOW TIATNIUM COATED JAWS FOR LONG LASTING LIFE.

Mars-Tech ER 8 COLLET DIN6499B AA 0.... from ₹ 354.00

The standard ER collet is the most widely used clamping system in the world.Made from Alloy spring steel and fully hardened these ER collets are ideal for many machining applications including boring, milling, reaming, tapping and grinding. Unless specified differently all of our ER collets feature runout of 0.010 micron or less. ,ER collet sizes start at ER8 through ER50. ER8 series collets have a capacity of 1mm-5mm. Each ER8 collet has a range of (0.5mm). The size indicated on the collet is the largest size it can hold and can be collapsed smaller within its collapse range of (0.5mm). For example, ER8-3mm can grab a round shank from 3mm diameter to 2.5mm diameter.

Mars-Tech Collet Chuck ER11 A/M type ... from ₹ 1,023.00

Cylindrical Shank / Straight Shank Collet chuck also called Baby collet chuck because of small size and same chuck which comes in BT40 or big tapers , its very useful to increase length of a chuck and also used in turning machine where you have turret sleeve size smaller but straight, its also useful to OEM of machines like Multi Spindle machine and it comes in various sizes to fit in , from Smallest 8 mm to 40 mm are commonly available. This is made from high quality steel and hardened upto 50 hrc for long lasting life ER11 COLLET RANGE FROM 1MM TO 7 MM STANDARD IN VARIATION OF 0.5 MM

Mars-Tech Drill chuck Arbor MT Taper ... from ₹ 240.00

Arbor are used for drill chuck kindly choose Male Taper size as per your machine. MT 2 - JT 1 MEANS - MT2 IS MACHINE TAPER , JT1 IS KEYLESS DRILL CHUCK FEMALE TAPER JT1 IS MOSTLY USED FOR SMALL SIZE CHUCK 0-6 MM NEED JT1