TORX SCREW (NORMAL)
TORX SCREW (HP)
Shank Type Cutter
Modular Face Mill Cutter
Indexable Milling Cutters
ER NUT
LOCKING DEVICE
ER SPANNER
ER COLLET
BT40 HOLDER
CYLINDRICAL COLLET CHUCK
PULL STUDS
BT30 HOLDER
TORX SCREW (GREY)
DRILL CHUCK
EDGE FINDER
Z setter
ER TAP COLLET
C TYPE BORING HEAD
TORX KEY
BBT40
U Drill
Turning Tool Holders
SK40 HOLDERS
ER Collets
ARBOR
Indexable Cutters
Metrology
ISO40 HOLDERS
TORX SCREW (UHP)
DEAL
TORX KEY HP
Hydraulic Collet
BORING KIT
Carbide Boring Bar
SDJ Boring heads
UHP ER COLLET
Steel Boring Bar
Threading Boring Bar
TORX KEY HANDLE
Indexable Milling Cutter
Chamfer Cutter
Multifunction Drill
Carbide Milling Inserts
EWN Fine Boring head
TCT Rough Boring Head
EXTENSION
BST HOLDER
Grooving Bar
ECCENTRIC SLEEVE
Back to all products
mars-tech
All products
5 & 6 Flute Endmills
Accessories
Accessories APP
Accessories APP 2
All
Ballnose (45 HRC)
Ballnose (55 HRC)
Ballnose (60 HRC)
Ballnose (65 HRC)
Ballnose (65 HRC)
Ballnose (Inserted)
Ballnose - 45 HRC
Ballnose - 55 HRC
Ballnose - 55 HRC 1
Ballnose - 60 HRC
Ballnose - 60 HRC 1
Ballnose 4 Flute (55HRC)
BBT40 Holders
Boring Heads
BPT
BT-30 Type
BT-40 BCA
BT-40 Type
Carbide Cutters
Carbide Cutters
Carbide Drills
CARBIDE15
CBN Inserts
Ceramic
Ceratizit
Cermet
Chamfer Cutter
Chamfering
Collet Chucks
Collet Chuks
Collet ER Types
Collets - ER Type
Corner Radius Endmill
Cutters High Feed
Cylindrical Chuks
Cylndrical Chuck
Dasqua
Deal of the Day
Deskar
Dijet
Drill Chuck - Keyless
Drilling Insert
Duracarb
Edge Finders
Endmill (3 Flute) DLC
Endmill (45 HRC)
Endmill (55 HRC) 1
Endmill (60 HRC)
Endmill (65 HRC)
Endmill (Inserted)
Endmill - 45 HRC
Endmill - 55 HRC
Endmill - 55 HRC 1
Endmill - 60 HRC
Endmill - 60 HRC 1
Endmill 2 Flute
Endmill Ballnose - Micro
ER Collets
ER Nuts
ER Spanners
ER Tap Collets
Find the Edge
Gauges
Grooving Inserts
Grooving Work
Heads - Boring
High Feed
Hitachi
HRC63(Nano Coated)
Indexable Cutters
Inserted Ballnose
Inserted Cutters
Inserted Endmill
Inserts
INSERTS15
ISO40 Holders
Jaibros
JXD
Keyless Drill Chuck
Knob - Pull Studs
Knob- Pull Studs
Korloy
Korloy
Kyocera
Life
Locking Device
Long Neck Cutters
Mars-Tech
Measurings
Metrology
Micro Endmill Ballnose
Milling Inserts
Milling Opertations
Miscellaneous
Mitsubishi
Multifunction Tools
Non Standard Endmills
Non-Ferrous
Nuts - ER
Nuts ER
PCD Inserts
Promo Inserts
Pull Studs
Rougher Endmills
Single Flute Endmill
SK-40 Type
Spanner - ER
Spanners - ER
Straight Shank Chucks
Tabikut
Tabikut Inserts
TaeguTec
Threading Application
Threading Inserts
Tool Boy
Tools Boy
Torx Keys
Torx Screws
TURNING
Turning Holders
Turning Inserts
Turning Usage
U Drill
Uncoated End & Ball
volume discount
Wholesale Deals
Widia
Yuzuki
Z Setter
ZCCCT
Zero Pre Setter
Zero Setter
Mars-Tech
EOC25 NUT pack of 1
₹ 950.00
EOC25 nut can only be used with EOC 25 collet
NUT WITH BEARING
DEALS ARE NOT EXCHANGEABLE NOR RETURNABLE
Mars-Tech
EPNW0603 suitable Dia 16mm ...
₹ 1,444.00
ASR-EPNW06-C16-16-200L-2T
This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use EPNW0603 FOR hitachi Brand Insert into this , If any other brand have same insert it can also fixed to this.
Mars-Tech
ER 11 COLLET DIN6499B AA 0....
from ₹ 253.00
The standard ER collet is the most widely used clamping system in the world.Made from Alloy spring steel and fully hardened these ER collets are ideal for many machining applications including boring, milling, reaming, tapping and grinding. Unless specified differently all of our ER collets feature runout of 0.010 micron or less. ,ER collet sizes start at ER8 through ER50.
ER11 series collets have a capacity of 1mm-7mm. Each ER11 collet has a range of (0.5mm). The size indicated on the collet is the largest size it can hold and can be collapsed smaller within its collapse range of (0.5mm). For example, ER11-3mm can grab a round shank from 3mm diameter to 2.5mm diameter.
Mars-Tech
ER 11 M/A Type Spanner Red ...
from ₹ 181.00
ER11M Wrench is made from high quality alloy steel ,Thick material allows high torque without bending,5 point contact ensures no distortion of collet nut while tightening,ER11 Wrench works on all of our M Type collet chucks that take ER11 collets
Mars-Tech
ER 16 COLLET DIN6499B AA 0....
from ₹ 241.00
The standard ER collet is the most widely used clamping system in the world.Made from Alloy spring steel and fully hardened these ER collets are ideal for many machining applications including boring, milling, reaming, tapping and grinding. Unless specified differently all of our ER collets feature runout of 0.010 micron or less. ,ER collet sizes start at ER8 through ER50.
ER16 series collets have a capacity of 1mm-12mm. Each ER16 collet has a range of (1 mm). The size indicated on the collet is the largest size it can hold and can be collapsed smaller within its collapse range of (0.9mm). For example, ER16-3mm can grab a round shank from 3mm diameter to 2.1mm diameter.
Mars-Tech
ER 20 COLLET DIN6499B AA 0....
from ₹ 229.00
₹ 380.00
The standard ER collet is the most widely used clamping system in the world.Made from Alloy spring steel and fully hardened these ER collets are ideal for many machining applications including boring, milling, reaming, tapping and grinding. Unless specified differently all of our ER collets feature runout of 0.010 micron or less. ,ER collet sizes start at ER8 through ER50.
ER20 series collets have a capacity of 1mm-14mm. Each ER20 collet has a range of (1 mm). The size indicated on the collet is the largest size it can hold and can be collapsed smaller within its collapse range of (0.9mm). For example, ER20-3mm can grab a round shank from 3mm diameter to 2.1mm diameter.
Mars-Tech
ER 25 COLLET DIN6499B AA 0....
from ₹ 253.00
₹ 420.00
The standard ER collet is the most widely used clamping system in the world.Made from Alloy spring steel and fully hardened these ER collets are ideal for many machining applications including boring, milling, reaming, tapping and grinding. Unless specified differently all of our ER collets feature runout of 0.010 micron or less. ,ER collet sizes start at ER8 through ER50.
ER25 series collets have a capacity of 1mm-16mm. Each ER25 collet has a range of (1 mm). The size indicated on the collet is the largest size it can hold and can be collapsed smaller within its collapse range of (0.9mm). For example, ER25-3mm can grab a round shank from 3mm diameter to 2.1mm diameter.
Mars-Tech
ER 32 COLLET DIN6499B AA 0....
from ₹ 313.00
The standard ER collet is the most widely used clamping system in the world.Made from Alloy spring steel and fully hardened these ER collets are ideal for many machining applications including boring, milling, reaming, tapping and grinding. Unless specified differently all of our ER collets feature runout of 0.010 micron or less. ,ER collet sizes start at ER8 through ER50.
ER32 series collets have a capacity of 1mm-20mm. Each ER32 collet has a range of (1 mm). The size indicated on the collet is the largest size it can hold and can be collapsed smaller within its collapse range of (0.9mm). For example, ER32-6mm can grab a round shank from 6mm diameter to 5.1mm diameter.
Mars-Tech
ER 32 COLLET SET 1 MM TO 20...
₹ 7,015.00
THIS SET HAS 20 COLLETS 1 MM TO 20 MM EACH 1 NOS. PACKED IN PLASTIC BOX
The standard ER collet is the most widely used clamping system in the world.Made from Alloy spring steel and fully hardened these ER collets are ideal for many machining applications including boring, milling, reaming, tapping and grinding. Unless specified differently all of our ER collets feature runout of 0.010 micron or less. ,ER collet sizes start at ER8 through ER50.
ER32 series collets have a capacity of 1mm-20mm. Each ER32 collet has a range of (1 mm). The size indicated on the collet is the largest size it can hold and can be collapsed smaller within its collapse range of (0.9mm). For example, ER32-6mm can grab a round shank from 6mm diameter to 5.1mm diameter.
Mars-Tech
ER 40 COLLET DIN6499B AA 0....
₹ 361.00
The standard ER collet is the most widely used clamping system in the world.Made from Alloy spring steel and fully hardened these ER collets are ideal for many machining applications including boring, milling, reaming, tapping and grinding. Unless specified differently all of our ER collets feature runout of 0.010 micron or less. ,ER collet sizes start at ER8 through ER50.
ER40 series collets have a capacity of 3mm-26mm. Each ER32 collet has a range of (1 mm). The size indicated on the collet is the largest size it can hold and can be collapsed smaller within its collapse range of (0.9mm). For example, ER40-6mm can grab a round shank from 6mm diameter to 5.1mm diameter.
Mars-Tech
ER 50 COLLET DIA 32 PACK OF 1
₹ 1,866.00
The standard ER collet is the most widely used clamping system in the world.Made from Alloy spring steel and fully hardened these ER collets are ideal for many machining applications including boring, milling, reaming, tapping and grinding. Unless specified differently all of our ER collets feature runout of 0.010 micron or less. ,ER collet sizes start at ER8 through ER50.
ER50 series collets have a capacity of 6mm-34mm. Each ER50 collet has a range of (2 mm). The size indicated on the collet is the largest size it can hold and can be collapsed smaller within its collapse range of (1.8mm). For example, ER50-32mm can grab a round shank from 32mm diameter to 30.2mm diameter.
Mars-Tech
ER 8 COLLET DIN6499B AA 0....
from ₹ 354.00
The standard ER collet is the most widely used clamping system in the world.Made from Alloy spring steel and fully hardened these ER collets are ideal for many machining applications including boring, milling, reaming, tapping and grinding. Unless specified differently all of our ER collets feature runout of 0.010 micron or less. ,ER collet sizes start at ER8 through ER50.
ER8 series collets have a capacity of 1mm-5mm. Each ER8 collet has a range of (0.5mm). The size indicated on the collet is the largest size it can hold and can be collapsed smaller within its collapse range of (0.5mm). For example, ER8-3mm can grab a round shank from 3mm diameter to 2.5mm diameter.
Mars-Tech
ER11 Collet Ultra high prec...
from ₹ 590.00
The standard ER collet is the most widely used clamping system in the world.Made from Alloy spring steel and fully hardened these ER collets are ideal for many machining applications including boring, milling, reaming, tapping and grinding. Unless specified differently all of our ER collets feature runout of 0.010 micron or less. ,ER collet sizes start at ER8 through ER50.
ER11 series collets have a capacity of 1mm-7mm. Each ER11 collet has a range of (0.5mm). The size indicated on the collet is the largest size it can hold and can be collapsed smaller within its collapse range of (0.5mm). For example, ER11-3mm can grab a round shank from 3mm diameter to 2.5mm diameter.
Mars-Tech
ER11M SPANNER TYPE pack of 1
₹ 288.00
ER11M Spanner for ER11 miniature type nut , tighten it and loosen it
Mars-Tech
ER16 Collet set 1 mm to 10 ...
₹ 2,660.00
THIS SET HAS 10 COLLETS 1 MM TO 10 MM EACH 1 NOS.
The standard ER collet is the most widely used clamping system in the world.Made from Alloy spring steel and fully hardened these ER collets are ideal for many machining applications including boring, milling, reaming, tapping and grinding. Unless specified differently all of our ER collets feature runout of 0.010 micron or less. ,ER collet sizes start at ER8 through ER50.
ER32 series collets have a capacity of 1mm-20mm. Each ER32 collet has a range of (1 mm). The size indicated on the collet is the largest size it can hold and can be collapsed smaller within its collapse range of (0.9mm). For example, ER32-6mm can grab a round shank from 6mm diameter to 5.1mm diameter.
Mars-Tech
ER16 Collet Ultra high prec...
from ₹ 566.00
The standard ER collet is the most widely used clamping system in the world.Made from Alloy spring steel and fully hardened these ER collets are ideal for many machining applications including boring, milling, reaming, tapping and grinding. Unless specified differently all of our ER collets feature runout of 0.005 micron or less. ,ER collet sizes start at ER8 through ER50.
ER16 series collets have a capacity of 1mm-12mm. Each ER16 collet has a range of (1 mm). The size indicated on the collet is the largest size it can hold and can be collapsed smaller within its collapse range of (0.9mm). For example, ER16-3mm can grab a round shank from 3mm diameter to 2.1mm diameter.
Mars-Tech
ER16 Spanner M Type A Type ...
from ₹ 181.00
ER16M/A/UM Wrench is made from high quality alloy steel ,Thick material allows high torque without bending,5 point contact ensures no distortion of collet nut while tightening,ER16 Wrench works on all of our M Type and A type collet chucks that take ER16 collets
Mars-Tech
Er16 Spanner M Type Green H...
₹ 255.00
ER16M/A/UM Wrench is made from high quality alloy steel ,Thick material allows high torque without bending,5 point contact ensures no distortion of collet nut while tightening,ER16 Wrench works on all of our M Type and A type collet chucks that take ER16 collets
Mars-Tech
ER16 um SPANNER TYPE pack of 1
₹ 445.00
ER16UM Spanner for ER16UM regofix type nut , tighten it and loosen it
Mars-Tech
ER16A type spanner pack of 1
₹ 264.00
ER16A Spanner for HEXAGONAL type nut , tighten it and loosen it