Quality Turning Holders & Tool Holders for CNC Machining in India – Page 3

MTQNL/R TNMG1604 Boring Bar dia 16/20/25/32 pack of 1

Mars-Tech MTQNL/R TNMG1604 Boring Bar... from ₹ 826.00

PLEASE CHECK 2ND IMAGE AND ANGEL BEFORE ORDERING. This boring bar comes in different angel which change the usage and application kindly check 2nd image of the product for technical details , spare details and angel degree

Mars-Tech 25 mm boring bar ccmt09 pac... ₹ 1,593.00

25 mm boring bar ccmt09 pack of 1CCMT BORING BAR ENTRY DIA IS 32 MM OF THIS BAR SHANK IS 25 MM SUITABLE TO CCMT09T3 INSERT OF ANY BRAND LENGTH OF THIS BORING BAR - 250 MM SUITABLE SCREW 4x8 TORX KEY - T15

MCBNL/R Turning Holder suitable to cnmg1204 MCBNL/R pack of 1

Mars-Tech MCBNL/R Turning Holder suit... ₹ 1,033.00

Turning holders comes in Right hand and left hand check the size also check Shank size 20 mm and 25 mm please choose this by looking at 2nd image for technical angel and spare parts for same. Turning Holder MCBNL/R 2020 K12 Suitable toCNMG1204 INSERT.

Step boring bar ccmt dia 8/12/16 pack of 1

Mars-Tech Step boring bar ccmt dia 8/... from ₹ 944.00

Step boring bar are also called reduce shank bar they have bigger size of shank for holding but machining part is reduce size 8 mm bar with 16 mm shank 10 mm bar with 16 mm shank 12 mm bar with 16 mm shank 16 mm bar with 20 mm shank

MDPNN -dnmg1506 neutral tool m type pack of 1

Mars-Tech MDPNN -dnmg1506 neutral too... ₹ 1,035.00

MDPNN is DNMG neutral tool DNMG1506

SVJBL/R VBMT16 J angel Boring Bar Dia 16/20/25 pack of 1

Mars-Tech SVJBL/R VBMT16 J angel Bori... from ₹ 1,416.00

PLEASE CHECK 2ND IMAGE AND ANGEL BEFORE ORDERING. This boring bar comes in different angel which change the usage and application kindly check 2nd image of the product for technical details , spare details and angel degree

SCLCR -CCMT1204Turning Holder ccmt SCLCL/R pack of 1

Mars-Tech SCLCR -CCMT1204Turning Hold... ₹ 1,033.00

Turning holders comes in Right hand and left hand check the size also check Shank size 20 mm and 25 mm please choose this by looking at 2nd image for technical angel and spare parts for same. Turning Holder SCLCL/R 2020 K12 Suitable toCCMT1204 Insert.

1.5mm MGMN150 insert Grooving Holder suitable to MGMN150 Korloy pack of 1

Elevate Tools 1.5mm MGMN150 insert Groovi... ₹ 1,652.00

CHOOSE RIGHT HAND OR LEFT HAND CAREFULLY Grooving holders are used for parting and grooving in the turning machine. 1.5 mm grooving holder suitable to KORLOY profile of insert it can fit to any insert naming MGMN150 mm T max is the maximum grooving capacity of the holder if the grooving capacity is 10 mm it means it can part 20 mm of the round bar maximum.

10 MM Threading Boring bar 16MM SHANK for 11IR threading insert pack of 1

Mars-Tech 10 MM Threading Boring bar ... ₹ 826.00

Right hand internal thread boring bar SNR10M11-A16 SHANK SIZE IS 16 MM , REDUCE SHANK IS 10 MM SUITABLE INSERT IS 11 IR Entry Dia 12mm Shank Dia 16 mm SCREW - 2.5X6 TORX KEY - T8 Length - 150MM

SDNCN - DCMT11T3 Turning Holder dcmt SDNCN pack of 1

Mars-Tech SDNCN - DCMT11T3 Turning Ho... ₹ 1,033.00

Turning holders comes in Right hand and left hand check the size also check Shank size 20 mm and 25 mm please choose this by looking at 2nd image for technical angel and spare parts for same. Turning Holder SDNCN 1616 M11 Suitable toDCMT11T3 Insert.

25 mm Internal grooving bar with 2,3,4 mm tdc insert pack of 1

Elevate Tools 25 mm Internal grooving bar... ₹ 2,832.00

CHOOSE SIZE CAREFULLY MINIMUM ENTRY DIAMETER OF 25 MM BAR IS 33 MM Internal Grooving bar has different sizes this is suitable to TDC,TDT,TDJ,TDX Suitable to Taegutec Tip Steps to choose size. 1.Entry Diameter of the component and bar entry dia should be less than component entry dia 2. width inside you need for this if you need a 2 mm groove width you should choose 2 mm of grooving insert and if you have width of 3.5 mm you can do with both 2 mm and 3 mm of insert so choose 2 mm or 3 mm 3. Right hand or left hand as per machine or as your requirement

16 mm Internal grooving bar suitable to 2,3,4 mm tdc insert pack of 1

Elevate Tools 16 mm Internal grooving bar... ₹ 2,360.00

CHOOSE SIZE CAREFULLY MINIMUM ENTRY DIAMETER IS 22 MM Internal Grooving bar has different sizes this is suitable to TDC,TDT,TDJ,TDX Suitable to Taegutec Tip Steps to choose size. 1.Entry Diameter of the component and bar entry dia should be less than component entry dia 2. width inside you need for this if you need a 2 mm groove width you should choose 2 mm of grooving insert and if you have width of 3.5 mm you can do with both 2 mm and 3 mm of insert so choose 2 mm or 3 mm 3. Right hand or left hand as per machine or as your requirement

Mars-Tech Turning Holder tnmg MTFNR/L... ₹ 1,033.00

Turning Holder MTFNL/R2525 M16 Suitable to TNMG160404/04/08/12 Insert. Spare set remain same for right left 2020 shank 2525 shank Black Color , High Quality , Left Hand. Suitable Insert TNMG160408 Try Tabikut Turning Insert.

R6 insert turning holder 2525 shank size pack of 1

Mars-Tech R6 insert turning holder 25... ₹ 1,345.00

Turning holder suitable to RPMT1204 insert Right hand left hand and neutral

MCKNL/R CNMG1204 other edge boring bar Boring Bar dia 20/25/32 pack of 1

Mars-Tech MCKNL/R CNMG1204 other edge... from ₹ 1,062.00

PLEASE CHECK ANGEL PICTURE BEFORE ORDERING This boring bar is used for other edge of cnmg which is not used in general usage. you can use this boring bar to use unused side of cnmg insert CNMG1204 Check 2nd image for technical details and spare parts , cnmg also comes in different angles

stunl boring bar TNMG16 Boring Bar dia 16/20 pack of 1

Mars-Tech stunl boring bar TNMG16 Bor... from ₹ 708.00

PLEASE CHECK 2ND IMAGE AND ANGEL BEFORE ORDERING. This boring bar comes in different angel which change the usage and application kindly check 2nd image of the product for technical details , spare details and angel degree This is Screw clamp boring bar only. 3.5x12 mm screw will be used.

MTUNL/R TNMG1604 Boring Bar dia 16/20/25/32 pack of 1

Mars-Tech MTUNL/R TNMG1604 Boring Bar... from ₹ 826.00

PLEASE CHECK 2ND IMAGE AND ANGEL BEFORE ORDERING. This boring bar comes in different angel which change the usage and application kindly check 2nd image of the product for technical details , spare details and angel degree

SDJCL/R -DCMT11T3 Turning Holder dcmt SDJCL/R pack of 1

Mars-Tech SDJCL/R -DCMT11T3 Turning H... ₹ 1,033.00

Turning holders comes in Right hand and left hand check the size also check Shank size 20 mm and 25 mm please choose this by looking at 2nd image for technical angel and spare parts for same. Turning Holder SDJCL/R 1616 M11 Suitable to DCMT11T3 Insert.

SRDCN 2525 RC1204 insert holder for turining radius pack of 1

Mars-Tech SRDCN 2525 RC1204 insert ho... ₹ 1,033.00

SRDCN is a Screw clamp holders in 2525 shank SCREW SIZE 4X10 its neutral tool

SVQBL vbmt1604 holder 2525/2020 shank pack of 1

Mars-Tech SVQBL vbmt1604 holder 2525/... ₹ 1,033.00

SCREW CLAMP HOLDERS SCREW SIZE 4X10 Turning Holder SVQB/L 2525 M16 Suitable to VBMT1604 Insert. Black Color , High Quality , Left Hand. Suitable Insert VBMT1604 Try Tabikut Brand Turning Insert. Screw set remain same for right left 2020 shank 2525 shank

Get Extra 1% Discount on Jaibros App only

Find anything you need

Turning Holders

GST Input Credit

7-Day Return

Lowest Prices

Highest Quality