Modular Face Mill Cutter

Mars-Tech 100 Mm Bull Cutter For Die ... ₹ 3,310.00

100 Mm Bull Cutter For Die And Mould Facing Cutter Suitable To RPMT1204 R6 Of Mostly BrandEMRW-6R-100-32-6T suitable for R6 insert100 mm Bull Cutter For Die And Mould Facing Cutter This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use any ISO inserts of RPMT1204/RDKW1204/R6 OF mostly brand into this. Recommended Suitable insert for this cutter is TABIKUT Carbide Insert

Mars-Tech 100 mm other edge 6 pocket ... ₹ 5,404.00

100MM APMT1604 OTHER EDGE CUTTER 75 DEGREE 6 POCKET Dia 100 cutter for APMT1604 insert , facemill cutter 100 mm apmt1604 Shank Holder FMB-32 This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use APMT1604 Of Tabikut Brand Insert into this If any other brand has same insert it can also be fixed to this. there are many Chinese brands also making the same inserts so you can just check the description of the size from other brands to fix this insert.

Sold out

Mars-Tech 100 mm R8 cutter for RDKW16... ₹ 3,852.00

100 mm R8 cutter for RDKW1605 insert 6 pocket pack of 1EMR-8R-100-32-6T suitable to RDKW1605 /RDMW1605 MO ZCCCT or any other brand Insert SUITABLE SCREW M5X12 , SUITABLE KEY T20 This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by center to center and they have center hole both sides, you can use RDMT1605 MO ZCCCT or any other brand Insert

Mars-Tech 125 Mm Bull Cutter For Die ... ₹ 4,514.00

EMRW-6R-125-40-7T suitable to R6 insert 5 INCH FACING CUTTER This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of RPMT1204/RDKW1204/R6 OF mostly brand into this , Recommended Suitable insert for this cutter is TABIKUT Carbide Insert

Mars-Tech 160 Mm Bull Cutter For Die ... ₹ 7,222.00

EMRW-6R-160-40-8T suitable to R6 insert 6 INCH cutter This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of RPMT1204/RDKW1204/R6 OF mostly brand into this , Recommended Suitable insert for this cutter is TABIKUT Carbide Insert

Mars-Tech 200 MM Milling Indexable Mi... ₹ 13,541.00

This 200 mm Cutter is for face milling Facemill holder used in this cutter is PCD type This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use any ISO inserts of RPMT1204/RDKW1204/R6 OF mostly brand into this. Recommended Suitable insert for this cutter is TABIKUT Carbide Insert

50 Mm Bull Cutter For Die And Mould | RPMT10T3

Mars-Tech 50 -R5-10T3 Mm Bull Cutter ... ₹ 1,505.00

FOR TECHNICAL DETAILS GO TO SECOND IMAGE OF PRODUCT EMRT-5R-50-22-4T SUITABLE TO R5 RPMT10T3 This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts of RPMT10T3/RPKT10T3/R5 OF mostly brand into this , please note this 10T3 Thickness is 3.87 mm and RPMW1003 thickness is 3.18 mm and 10T3 have design on it. also a picture to check both types.

Mars-Tech 50 mm Apmt1604 other edge i... ₹ 2,166.00

75 DEGREE APMT1604 other edge cutter 3 pockets.Dia 50- 3 pocket cutter for APMT1604 insert , facemill cutter 50 mm apmt1604 Shank Holder FMB-22 This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use APMT1604 Of Tabikut Brand Insert into this If any other brand has same insert it can also be fixed to this. there are many Chinese brands also making the same inserts so you can just check the description of the size from other brands to fix this insert.

Mars-Tech 50 mm Bull cutter for die a... ₹ 1,204.00

50 mm Bull cutter for die and mould facing cutter suitable to RPMW1003 R5 of mostly brandEMRW-5R-50-22-4T SUITABLE TO R5 RPMW1003 This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by center to center and they have center hole both sides, you can use any ISO inserts of RPMW1003/RPKT1003/R5 OF mostly brand into this, please note this 10T3 Thickness is 3.87 mm and RPMW1003's thickness is 3.18 mm and 10T3 has a design on it. also, a picture to check both types.

Mars-Tech 50 Mm Bull Cutter For Die A... from ₹ 1,204.00

50 Mm Bull Cutter For Die And Mould Facing Cutter Suitable To RPMT12T3 R6 Of Mostly BrandEMRW-6R-50-22-4T suitable to R6 12T3 insert This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use any ISO inserts Or DIJETof RDMT12T3 RPMT12T3/RDKW12T2/R6 OF mostly brand into this , Recommended Suitable insert for this cutter is TABIKUT Carbide Insert

Mars-Tech 50 Mm Bull Cutter Suitable ... ₹ 1,444.00

50 Mm Bull Cutter Suitable To RDMT1604 MOTN HITACHI BRANDTRS-8R-50-22-3T suitable to RDMT1604 MO TN Hitachi Insert This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use RDMT1604 MOT TN HITACHI BRAND INSERT ONLY

Sold out

Mars-Tech 50 mm roughing cutter modul... ₹ 11,795.00

50 mm roughing cutter modular type suitable to apmt1604This is Helical Cutter also called a rougher cutter it has more pockets used for milling operation for roughing or plunging which saves time used in roughing operation also This is a 50 mm modular cutter please read the details before ordering BAP400R-50-22-60M-3T-15P Suitable Insert - APMT1604 Shank Diameter for holding - 22 mm fmb holder for holding with the extra long screw you need to purchase extra, you can easily get from a local shop. Cutter Diameter- 50 mm Cutting length Helical length - 60 mm Total Length - 100 mm 3 Pocket - 15 inserts will fit in one time

Sold out

50 mm SDMT1204 Milling Cutter suitable to Widia Insert M690 series pack of 1

Mars-Tech 50 mm SDMT1204 Milling Cutt... ₹ 2,021.00

50 mm SDMT1204 Milling Cutter suitable to Widia Insert M690 series pack of 1SDMT1204 WIDIA milling cutter body dia 50 4 pockets 22 mm hole. This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use SDMT1204 Of WIDIA and Tabikut Brand Insert into this If any other brand has same insert it can also be fixed to this. there are many Chinese brands also making the same inserts so you can just check descriptions of sizes from other brands to fix this insert.

Mars-Tech 50 mm sdmt1205 High feed cu... ₹ 2,166.00

50 mm sdmt1205 High feed cutter suitable to tabikut Deskar Gesac brandASRF12-50-22-4T , ASRF12-63-22-4T This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use SDMT1205 Tabikut Brand Insert into this If any other brand has same insert it can also be fixed to this. there are many Chinese brands also making the same inserts so you can just check descriptions of sizes from other brands to fix this insert.

Mars-Tech 50 mm SNMX1206 cutter inser... ₹ 4,754.00

50 mm SNMX1206 cutter insert face mill in 45 degrees and 88 degrees suitable to KORLOY BrandSNMX1206 Facemill Cutter, indexable cutter body RM8 series 8 edges insert cutter body for dia 50,63, and 80 mm in 45-degree and 88 degree This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use SNMX1206 Of Korloy and Tabikut Brand Insert into this If any other brand has same insert it can also be fixed to this. there are many Chinese brands also making the same inserts so you can just check descriptions of sizes from other brands to fix this insert.

Mars-Tech 50 mm SOMT12T3 Indexable Cu... ₹ 2,407.00

50 mm SOMT12T3 Indexable Cutter dia 50 mm suitable to Mitsubishi Insert pack of 1 SOMT12T3 ASX400-050-A04R DIA 50 CUTTER BODY SUITABLE FOR MITSUBISHI SOMT12T3 ASX400-063-A05R DIA 63 MILLING CUTTER INDEXABLE SOMT12T3 ASX400-080-A06R DIA 80 FACE MILLING CUTTER This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use SOMT12T3 Of Mitsubishi and Tabikut Brand Insert into this If any other brand has same insert it can also be fixed to this. there are many Chinese brands also making the same inserts so you can just check descriptions of size from other brands to fix this insert.

Mars-Tech 50mm Bull Cutter RPMT1204 F... from ₹ 1,324.00

50 Mm Bull Cutter For Die And Mould Facing Cutter Suitable To RPmt1204 R6 Of Mostly BrandEMRW-6R-50-22-4T suitable for R6 insert This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by center to center and they have center hole both sides, you can use any ISO inserts of RPMT1204/RDKW1204/R6 OF mostly brand into this, Recommended Suitable insert for this cutter is TABIKUT Carbide Insert

Sold out

bull cutter for die & mould facing cutter

Mars-Tech 52 Mm Bull Cutter For Die A... ₹ 1,505.00

52 Mm Bull Cutter For Die And Mould Facing Cutter Suitable To RPMT1204 R6 Of Mostly BrandEMRW-6R-52-22-4T suitable to R6 1204 insert This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by center to center and they have center hole both sides, you can use any ISO inserts RPMT1204/RDKW1204/R6 OF mostly brand into this, acct, Chorley, targeted, dijet, Kyocera, Mitsubishi.

Sold out

Mars-Tech 52 Mm Bull Cutter For Die A... from ₹ 1,204.00

52 Mm Bull Cutter For Die And Mould Facing Cutter Suitable To RPMT12T3 R6 Of Mostly BrandEMRW-6R-52-22-4T suitable to R6 12T3 insert This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by center to center and they have center hole both sides, you can use any ISO inserts Or DIJETof RDMT12T3 RPMT12T3/RDKW12T3/R6 OF mostly brand into this, Recommended Suitable insert for this cutter is TABIKUT Carbide Insert

Mars-Tech 52 mm R8 cutter for RDKW160... ₹ 1,926.00

52 mm R8 cutter for RDKW1605 insert 3 pocket packs of 1EMR-8R-52-22-3T suitable to RDKW1605 MO ZCCCT or any other brand Insert SUITABLE SCREW M5X12 , SUITABLE KEY T20 This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by center to center and they have center hole both sides, you can use RDMT1605 MO ZCCCT or any other brand Insert