Carbide Ballnose 45 HRC
Carbide Ballnose 55 HRC
Carbide Ballnose 60 HRC
Carbide Endmill 45 HRC
CARBIDE ENDMILL 55 HRC
Carbide Endmill 60 HRC
Carbide Micro Endmill Ballnose
Carbide Single Flute Cutters
Taper Ballnose
WOOD CUTTER
All products
Accessories
Accessories APP
Accessories APP 2
All
Ballnose (45 HRC)
Ballnose (55 HRC)
Ballnose (60 HRC)
Ballnose (65 HRC)
Ballnose (65 HRC)
Ballnose (Inserted)
Ballnose - 45 HRC
Ballnose - 55 HRC
Ballnose - 55 HRC 1
Ballnose - 60 HRC
Ballnose - 60 HRC 1
Ballnose 4 Flute (55HRC)
BBT40 Holders
Boring Heads
BPT
BT-30 Type
BT-40 BCA
BT-40 Type
Carbide Cutters
Carbide Cutters
Carbide Drills
CARBIDE15
CBN Inserts
Ceramic
Ceratizit
Cermet
Chamfer Cutter
Chamfering
Collet Chucks
Collet Chuks
Collet ER Types
Collets - ER Type
Corner Radius Endmill
Cutters High Feed
Cylindrical Chuks
Cylndrical Chuck
Dasqua
Deal of the Day
Deskar
Dijet
Drill Chuck - Keyless
Drilling Insert
Duracarb
Edge Finders
Endmill (3 Flute) DLC
Endmill (45 HRC)
Endmill (55 HRC) 1
Endmill (60 HRC)
Endmill (65 HRC)
Endmill (Inserted)
Endmill - 45 HRC
Endmill - 55 HRC
Endmill - 55 HRC 1
Endmill - 60 HRC
Endmill - 60 HRC 1
Endmill 2 Flute
Endmill Ballnose - Micro
ER Collets
ER Nuts
ER Spanners
ER Tap Collets
Find the Edge
Gauges
Grooving Inserts
Grooving Work
Heads - Boring
High Feed
Hitachi
Indexable Cutters
Inserted Ballnose
Inserted Cutters
Inserted Endmill
Inserts
INSERTS15
ISO40 Holders
Jaibros
JXD
Keyless Drill Chuck
Knob - Pull Studs
Knob- Pull Studs
Korloy
Korloy
Kyocera
Life
Locking Device
Long Neck Cutters
Mars-Tech
Measurings
Metrology
Micro Endmill Ballnose
Milling Inserts
Milling Opertations
Miscellaneous
Mitsubishi
Multifunction Tools
Non Standard Endmills
Non-Ferrous
Nuts - ER
Nuts ER
PCD Inserts
Promo Inserts
Pull Studs
Rougher Endmills
Single Flute Endmill
SK-40 Type
Spanner - ER
Spanners - ER
Straight Shank Chucks
Tabikut
Tabikut Inserts
TaeguTec
Threading Application
Threading Inserts
Tool Boy
Tools Boy
Torx Keys
Torx Screws
TURNING
Turning Holders
Turning Inserts
Turning Usage
U Drill
Uncoated End & Ball
volume discount
Wholesale Deals
Widia
Yuzuki
Z Setter
ZCCCT
Zero Pre Setter
Zero Setter
Tabikut
5mm 50/75 long Carbide Endm...
from ₹ 584.00
5mm 50/75 long Carbide Endmill 60 HRC 4 Flutes pack of 1Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing
Size of Solid Carbide Cutter 60 HRC: 5 mm
Tabikut
2 mm Carbide Ballnose 2FLUT...
₹ 293.00
BALLNOSE ARE 2 FLUTES ONLY.
Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Wine Coating TiALin Coating, Endmill for Better Life and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, Plastic Packaging for non-breakable.
Pack of 1 means Qty. 1 Pack of 2 means price is for 2 nos.
Tabikut
Micro Endmill 0.3 Mm 4mm Sh...
₹ 525.00
Micro Endmill 0.3 mm with 2 Flutes and 4 mm Shank 0.6 mm Flute Length
Tabikut
4 mm Carbide Ballnose 2FLUT...
₹ 293.00
4 mm Carbide Ballnose 2FLUTES/ 45 HRC PACK OF 2BALLNOSE ARE 2 FLUTES ONLY.
Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Wine Coating TiALin Coating, Endmill for Better Life and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder Mill, side mill, etc, Plastic Packaging for non breakable.
Pack of 1 means Qty. 1 Pack of 2 means price is for 2 nos.
Tabikut
2.5 mm Carbide Endmill 45 H...
₹ 260.00
Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Wine Coating TiALin Coating, Endmill for Better Life and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing
Tabikut
1 mm Carbide Ballnose 60 Hr...
₹ 531.00
UPTO 6 MM 50 mm Length price is for 2 Nos. If you order 1 quantity you will get 2 pcs 460 rs. price is for 2 nos. 1 will cost 230 rs. only.
Ballnose are 2 flutes and Endmills are 4 flutes
1 mm Carbide Ballnose 60 Hrc Pack Of 2
Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing
Size of Carbide Ballnose 60 Hrc: 1mm
55 HRC AND 60 HRC LOOK SIMILAR BUT THERE IS DIFFERENCE IN QUALITY AND MATERIAL, 60 HRC CAN ALSO BE USED FOR STAINLESS STEEL
Tabikut
4 mm Carbide Ballnose 2 Flu...
₹ 637.00
4 mm Carbide Ballnose 2 Flutes TABIKUT 60 HRC pack of 2Ballnose are 2 flutes and Endmills are 4 flutes
Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill etc, Plastic Packaging for non-breakable packing
55 HRC AND 60 HRC LOOK SIMILAR BUT THERE IS DIFFERENCE IN QUALITY AND MATERIAL, 60 HRC CAN ALSO BE USED FOR STAINLESS STEEL
Tabikut
6 mm Carbide Ballnose 60 HR...
₹ 1,274.00
6 mm Carbide Ballnose 60 HRC PACK OF 2UPTO 6 MM 50 mm Length price is for 2 Nos. If you order 1 quantity you will get 2 pcs
Ballnose are 2 flutes and Endmills are 4 flutes
Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle , Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill etc, Plastic Packaging for non-breakable packing
55 HRC AND 60 HRC LOOK SIMILAR BUT THERE IS DIFFERENCE IN QUALITY AND MATERIAL , 60 HRC CAN ALSO BE USED FOR STAINLESS STEEL
Tabikut
8 mm Carbide Endmill 45 HRC...
from ₹ 443.00
8 mm Carbide Endmill 45 HRC PACK OF 1Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Wine Coating TiALin Coating, Endmill for Better Life and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, Plastic Packaging for non-breakable.
Pack of 1 means Qty. 1 Pack of 2 means price is for 2 nos.
Tabikut
2.5 Mm Carbide Ballnose 55 ...
₹ 434.00
Solid Carbide Cutter are used to machine Hard and tough Material , Steel , Alloy Steel , Cast iron , stainless steel and many other material grades.
Bronze TiSiN Coating , Endmill for Better Life and wear resistance.35 Degree Helix Angel , Grain Size 0.5μmUsed for Face Mill , Shoulder mill , side mill etc ,Plastic Packaging for non breakable packing
Flute Length of Ballnose is double of diameter if diameter is 1 mm flute length will be 2 mm same for other sizes , if total length increase flute length remain same of double of diameter.
Tabikut
5 mm Carbide Ballnose 55 Hr...
from ₹ 354.00
5 mm Carbide Ballnose 55 Hrc 6 mm Shank size 50,75 and 100 mm longBronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing
Tabikut
10 mm Carbide Endmill 75/10...
from ₹ 699.00
10 mm Carbide Endmill 75/100 Long 45 HRC PACK OF 1Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Wine Coating TiALin Coating, Endmill for Better Life and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmThey are used for Face mills, Shoulder mills, side mills, etc, and Plastic Packaging for non-breakable.
Pack of 1 means Qty. 1 Pack of 2 means price is for 2 nos.
Tabikut
3.5 mm Carbide Endmill 55 H...
₹ 295.00
3.5 mm Carbide Endmill 55 HRC 4 mm Shank Length 50 MmSolid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill , side mill etc, Plastic Packaging for non-breakable packing
Tabikut
2 Mm Carbide Ballnose 60 HR...
₹ 531.00
UPTO 6 MM 50 mm Length price is for 2 Nos. If you order 1 quantity you will get 2 pcs 460 rs. price is for 2 nos. 1 will cost 230 rs. only.
Ballnose are 2 flutes and Endmills are 4 flutes
Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
.Bronze TiSiN Coating, Endmill for Better Life, and wear resistance35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing
55 HRC AND 60 HRC LOOK SIMILAR BUT THERE IS DIFFERENCE IN QUALITY AND MATERIAL, 60 HRC CAN ALSO BE USED FOR STAINLESS STEEL
Tabikut
Micro Endmill 0.8 Mm 4mm Sh...
₹ 502.00
Micro Endmill 0.8 mm with 2 Flutes and 4 mm Shank 0.6 mm Flute Length
Tabikut
2.5 Mm Carbide Endmill 60 H...
₹ 519.00
UPTO 6 MM 50 mm Length price is for 2 Nos. If you order 1 quantity you will get 2 pcs 440 rs. price is for 2 nos. 1 will cost 220 rs. only.
Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing
55 HRC AND 60 HRC LOOK SIMILAR BUT THERE IS A DIFFERENCE IN QUALITY AND MATERIAL, 60 HRC CAN ALSO BE USED FOR STAINLESS STEEL.
Tabikut
Micro Endmill 0.6 Mm 4mm Sh...
₹ 561.00
Micro Endmill 0.6 mm with 2 Flutes and 4 mm Shank 1.2 mm Flute Length
Tabikut
1.5 Mm Carbide Ballnose 60 ...
₹ 578.00
UPTO 6 MM 50 mm Length price is for 2 Nos. If you order 1 quantity you will get 2 pcs 490 rs. price is for 2 nos. 1 will cost 295 rs. only.
Ballnose are 2 flutes and Endmills are 4 flutes 1.5 mm Carbide Ballnose 60 HRC PACK OF 2Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Bronze Tisin Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for nonbreakable packing
Size of Carbide Ballnose 60 HRC: 1.5mm
55 HRC AND 60 HRC LOOK SIMILAR BUT THERE IS DIFFERENCE IN QUALITY AND MATERIAL, 60 HRC CAN ALSO BE USED FOR STAINLESS STEEL
Tabikut
20 Mm Carbide Endmill 55 HR...
from ₹ 5,328.00
20 mm Carbide Endmill 55 HRC 20 MM In 20 Mm Shank 4 Flutes Total Length Is 100/150/200 MMSolid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Bronze TiSiN Coating, Endmill for Better Life, and wear resistance.35 Degree Helix Angle, Grain Size 0.5μmUsed for Face Mill, Shoulder mill, side mill, etc, and Plastic Packaging for non-breakable packing
Tabikut
12 mm Carbide Endmill 45 HR...
from ₹ 1,023.00
12 mm Carbide Endmill 45 HRC 4 Flutes 75/100 PACK OF 1Solid Carbide cutters are used to machine Hard and tough Materials, Steel, Alloy Steel, Cast iron, stainless steel, and many other material grades.
Wine Coating TiALin Coating, Endmill for Better Life and wear resistance.35 Degree Helix Angel, Grain Size 0.5μmThey are used for Face mills, Shoulder mills, side mills, etc, and Plastic Packaging for non-breakable.
Pack of 1 means Qty. 1 Pack of 2 means price is for 2 nos.