Chamfer Cutter
Chamfer Cutter Insert
Indexable Cutters
Indexable Milling Cutter
Indexable Milling Cutters
Modular Face Mill Cutter
Shank Type Cutter
All products
Accessories
Accessories APP
Accessories APP 2
All
Ballnose (45 HRC)
Ballnose (55 HRC)
Ballnose (60 HRC)
Ballnose (65 HRC)
Ballnose (65 HRC)
Ballnose (Inserted)
Ballnose - 45 HRC
Ballnose - 55 HRC
Ballnose - 55 HRC 1
Ballnose - 60 HRC
Ballnose - 60 HRC 1
Ballnose 4 Flute (55HRC)
BBT40 Holders
Boring Heads
BPT
BT-30 Type
BT-40 BCA
BT-40 Type
Carbide Cutters
Carbide Cutters
Carbide Drills
CARBIDE15
CBN Inserts
Ceramic
Ceratizit
Cermet
Chamfer Cutter
Chamfering
Collet Chucks
Collet Chuks
Collet ER Types
Collets - ER Type
Corner Radius Endmill
Cutters High Feed
Cylindrical Chuks
Cylndrical Chuck
Dasqua
Deal of the Day
Deskar
Dijet
Drill Chuck - Keyless
Drilling Insert
Duracarb
Edge Finders
Endmill (3 Flute) DLC
Endmill (45 HRC)
Endmill (55 HRC) 1
Endmill (60 HRC)
Endmill (65 HRC)
Endmill (Inserted)
Endmill - 45 HRC
Endmill - 55 HRC
Endmill - 55 HRC 1
Endmill - 60 HRC
Endmill - 60 HRC 1
Endmill 2 Flute
Endmill Ballnose - Micro
ER Collets
ER Nuts
ER Spanners
ER Tap Collets
Find the Edge
Gauges
Grooving Inserts
Grooving Work
Heads - Boring
High Feed
Hitachi
Indexable Cutters
Inserted Ballnose
Inserted Cutters
Inserted Endmill
Inserts
INSERTS15
ISO40 Holders
Jaibros
JXD
Keyless Drill Chuck
Knob - Pull Studs
Knob- Pull Studs
Korloy
Korloy
Kyocera
Life
Locking Device
Long Neck Cutters
Mars-Tech
Measurings
Metrology
Micro Endmill Ballnose
Milling Inserts
Milling Opertations
Miscellaneous
Mitsubishi
Multifunction Tools
Non Standard Endmills
Non-Ferrous
Nuts - ER
Nuts ER
PCD Inserts
Promo Inserts
Pull Studs
Rougher Endmills
Single Flute Endmill
SK-40 Type
Spanner - ER
Spanners - ER
Straight Shank Chucks
Tabikut
Tabikut Inserts
TaeguTec
Threading Application
Threading Inserts
Tool Boy
Tools Boy
Torx Keys
Torx Screws
TURNING
Turning Holders
Turning Inserts
Turning Usage
U Drill
Uncoated End & Ball
volume discount
Wholesale Deals
Widia
Yuzuki
Z Setter
ZCCCT
Zero Pre Setter
Zero Setter
Mars-Tech
200 mm APMT16 cutter
₹ 13,541.00
200 mm cutter suitable to APMT1604
60 mm flange type hole with 4 pcd holes
Mars-Tech
High Feed Cutter Dia 80 Mm ...
₹ 5,416.00
ASRF12-80-27-6T , ASRF12-63-22-4T
This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use SDMT1205 Tabikut Brand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.
Mars-Tech
50 mm Bull cutter for die a...
₹ 1,204.00
50 mm Bull cutter for die and mould facing cutter suitable to RPMW1003 R5 of mostly brandEMRW-5R-50-22-4T SUITABLE TO R5 RPMW1003
This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by center to center and they have center hole both sides, you can use any ISO inserts of RPMW1003/RPKT1003/R5 OF mostly brand into this,
please note this 10T3 Thickness is 3.87 mm and RPMW1003's thickness is 3.18 mm and 10T3 has a design on it. also, a picture to check both types.
Mars-Tech
Indexable Inserted Endmill ...
₹ 1,733.00
This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use AOMT123608 For Mitsubishi Brand Insert into this , If any other brand have same insert it can also fixed to this.
Mars-Tech
WDMW06T320 High Feed Insert...
₹ 1,926.00
SKS-2025-200-S25 , SKS-4050R-08-22 ,SKS-2028-40E-S25,SKS-4063R-08-27,SKS-5080R-10-27
This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use WDMW06T320 DIJETBrand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.
Mars-Tech
25mm aomt184808 2 Pocket Mi...
₹ 1,866.00
25mm aomt184808 2 Pocket Mitsubishi Insert pack of 1This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS and changing of insert time is also very low, They are hardened 45-50 HRC not to wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by center to center and they have center hole both sides, you can use AOMT184808 For Mitsubishi Brand Insert into this , If any other brand have same insert it can also fixed to this.
Mars-Tech
0-20 mm 45 degree triangle ...
₹ 4,484.00
This chamfer cutter is 45 degree you can chamfer from 0 mm
This has a special insert which only fit to this not any general inserts will fit to this.
Mars-Tech
0-16 mm 45 degree TFDD12040...
₹ 4,602.00
This chamfer cutter is 45 degree you can chamfer from 0 mm
This has a special insert which only fit to this not any general inserts will fit to this.
Mars-Tech
WNMU08 Cutter Dia 100 mm Pa...
₹ 8,260.00
100 mm -7 pocket - M5 screw T20 torx key size.
This cutter is suitable to any brand of WNMU08 -8 Pocket 90 Degree High Feed Cutter.
Mars-Tech
100 mm R8 cutter for RDKW16...
₹ 3,852.00
100 mm R8 cutter for RDKW1605 insert 6 pocket pack of 1EMR-8R-100-32-6T suitable to RDKW1605 /RDMW1605 MO ZCCCT or any other brand Insert
SUITABLE SCREW M5X12 , SUITABLE KEY T20
This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by center to center and they have center hole both sides, you can use RDMT1605 MO ZCCCT or any other brand Insert
Mars-Tech
WNMU08 Cutter Dia 125 mm Pa...
₹ 11,328.00
This cutter is suitable to any brand of WNMU08 -8 Pocket 90 Degree High Feed Cutter.
Mars-Tech
40 mm Bull Nose modular R5 ...
₹ 1,888.00
40 MM Bull Nose RPMT10t3 /1204EMRW-40-22-3T- R5 OR R6
This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC not to wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, you can use any ISO inserts of RPMT1204/RDKW1204, R6 OF mostly brand into this, Suggested insert RPMT1204 OF Tabikut Brand.
Mars-Tech
20 mm ZCMT10 Insert cutter ...
₹ 1,805.00
NOTE: 16mm has 2 pockets.
Product Description
SICL 1610S16-2N-150L
SICL 2010S20-2N-200L
SICL 2510S25-3N-200L
This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by the center to center and they have center hole both sides, this cutter is suitable to ZCMT1003 from DIJET brand. If any other brand has the same insert you can use it for this cutter.
Mars-Tech
WDMW080520ZTR High Feed Ins...
₹ 1,926.00
SKS-2025-200-S25 , SKS-4050R-08-22 ,SKS-2028-40E-S25,SKS-4063R-08-27,SKS-5080R-10-27
This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use WDMW080520 DIJETBrand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.
Mars-Tech
Indexable Inserted Endmill ...
from ₹ 1,805.00
This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use BDMT1704 For Kyocera Brand Insert into this , If any other brand have same insert it can also fixed to this.
Mars-Tech
APKT1705 cutter Indexable I...
₹ 2,467.00
APKT1705 cutter Indexable Inserted Endmill Dia 32 Mm Shank 32 Mm 3 Pocket Suitable To APKT1705 For Taegu Tec InsertThis is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use APKT1705 For Taegu Tec Brand Insert into this , If any other brand have same insert it can also fixed to this.
Mars-Tech
Indexable Inserted Endmill ...
₹ 1,805.00
This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use APKT1705 For Taegu Tec Brand Insert into this , If any other brand have same insert it can also fixed to this.
Mars-Tech
Indexable Inserted Endmill ...
₹ 1,805.00
This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use JDMT1505 from Hitachi Brand Insert into this , If any other brand have same insert it can also fixed to this.
Mars-Tech
16 mm ballnose dijet 150/20...
from ₹ 3,445.00
This is full ballnose radius cutter its 16 mm with R8 radius
only suitable to DIJET BNM160 INSERT JC8003
Mars-Tech
52 mm R8 cutter for RDKW160...
₹ 1,926.00
52 mm R8 cutter for RDKW1605 insert 3 pocket packs of 1EMR-8R-52-22-3T suitable to RDKW1605 MO ZCCCT or any other brand Insert
SUITABLE SCREW M5X12 , SUITABLE KEY T20
This is a Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert, Using this can reduce the cost really low compared to HSS, and changing of insert time is also very low, They are hardened 45-50 HRC to not wear out, Pockets are well designed so insert and pocket seat have no gap in them, Run out tolerance is maintained by grinding by center to center and they have center hole both sides, you can use RDMT1605 MO ZCCCT or any other brand Insert