Mars-Tech

Mars-Tech WDMW06T320 High Feed Insert... ₹ 1,926.00

SKS-2025-200-S25 , SKS-4050R-08-22 ,SKS-2028-40E-S25,SKS-4063R-08-27,SKS-5080R-10-27 This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use WDMW06T320 DIJETBrand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

WDMW080520ZTR High Feed Insert Cutter Body

Mars-Tech WDMW080520ZTR High Feed Ins... ₹ 1,926.00

SKS-2025-200-S25 , SKS-4050R-08-22 ,SKS-2028-40E-S25,SKS-4063R-08-27,SKS-5080R-10-27 This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use WDMW080520 DIJETBrand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

WDMW080520ZTR High Feed Insert Cutter Body 63 Mm

Mars-Tech WDMW080520ZTR High Feed Ins... ₹ 1,926.00

SKS-2025-200-S25 , SKS-4050R-08-22 ,SKS-2028-40E-S25,SKS-4063R-08-27,SKS-5080R-10-27 This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use WDMW080520 DIJETBrand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

Sold out

WDMW080520ZTR High Feed Insert Cutter Body 80 Mm

Mars-Tech WDMW080520ZTR High Feed Ins... ₹ 4,152.00

SKS-2025-200-S25 , SKS-4050R-08-22 ,SKS-2028-40E-S25,SKS-4063R-08-27,SKS-5080R-10-27 80MM WITH 5 POCKET AND FMB27 This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use WDMW080520 DIJETBrand Insert into this , If any other brand have same insert it can also fixed to this. there are many Chinese brand also making same inserts so you can just check description of size from other brands to fix this insert.

Mars-Tech WNMU08 cutter 50 mm Pack Of 1 ₹ 4,248.00

50 dia 4 pocket M5 screw T20 key This cutter is suitable to any brand of WNMU08 -4 Pocket 90 Degree High Feed Cutter.

Mars-Tech WNMU08 Cutter Dia 100 mm Pa... ₹ 8,260.00

100 mm -7 pocket - M5 screw T20 torx key size. This cutter is suitable to any brand of WNMU08 -8 Pocket 90 Degree High Feed Cutter.

Mars-Tech WNMU08 Cutter Dia 125 mm Pa... ₹ 11,328.00

This cutter is suitable to any brand of WNMU08 -8 Pocket 90 Degree High Feed Cutter.

Mars-Tech WNMU08 Cutter Dia 63 mm Pac... from ₹ 4,950.00

63 MM 5 and 4POCKET 22 MM HOLE M5 SCREW T20 KEY This cutter is suitable to any brand of WNMU08 -5 Pocket 90 Degree High Feed Cutter.

Mars-Tech WNMU08 Cutter Dia 80 mm Pac... ₹ 6,608.00

80 mm 6 pocket M5 screw T20 torx key This cutter is suitable to any brand of WNMU08 -6 Pocket 90 Degree High Feed Cutter.

XOMX1204 Inserted Endmill Cutter Dia 25 and 32 mm

Mars-Tech XOMX1204 Inserted Endmill C... from ₹ 1,745.00

R217.79-2525.0-XO12-2AN,R217.79-3232.0-XO12-3AN This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use XOMX1204 For SECO Brand Insert into this , If any other brand have same insert it can also fixed to this.

XOMX1804 Inserted Endmill Cutter Dia 25 And 32 Mm

Mars-Tech XOMX1804 Inserted Endmill C... from ₹ 2,227.00

R217.69-2525.0-XO18-2AN,R217.69-3232.0-XO18-3AN This is Shoulder and Face Milling Cutter used mainly in CNC Milling and Manual Milling Machine with ISO Carbide Insert , Using this can reduce the cost really low compared to HSS and changing of insert time is also very low , They are hardened 45-50 HRC to not wear out , Pockets are well designed so insert and pocket seat have no gap in them , Run out tolerance is maintained by grinding by center to center and they have center hole both sides , you can use XOMX1804 For SECO Brand Insert into this , If any other brand have same insert it can also fixed to this.

Sold out

Mars-Tech Z setter 50 mm analog type ... ₹ 6,319.00

Z SETTER 50 MM MAGNETIC Have the central measuing part of the zero setter presetter against a plain surface and aligned if with the outer reference surface. Turn the dial gauge for zero setting. have the cutter touched against the Z zero setter. Once the indicator positio at zero the distance between the tool tip to workpiece is 50mm, +-0.005 mm